植物纤维增强聚合物基复合材料湿热老化研究进展

doi:10.11896/cldb.22030076

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (25779KB)
Export: BibTeX | EndNote (RIS)

Abstract Plant fibers have their advantageous characteristics such as low cost, wide sources, renewability, biodegradability, high specific modulus and strength. Now, the green composites prepared with plant fiber instead of synthetic fiber have attracted extensive attention from academia and industry, and have been preliminarily used in automotive, construction, aerospace and other fields. Compared to traditional synthetic fibres, plant fiber has multi-layered and multi-scale structure and inherent hydrophilicity which make its reinforced polymer matrix composite susceptible to the effects of moisture and temperature during service. These can cause a deterioration in mechanical properties and the damage or even failure of the whole structure, thus hindering the application and development of plant fiber composites. In recent years, some researchers have studied the hygrothermal aging mechanism of plant fiber reinforced polymer matrix composites. This paper reviews the current research of water absorption behavior, factors affecting water absorption, influence of hygrothermal aging on mechanical properties, interface failure mechanism, hygrothermal aging mechanism and influence of chemical treatment on hygrothermal aging of plant fiber reinforced composites. It is expected to provide refe-rences for further research in this field.

Key words： plant fiber composite hydrothermal aging aging mechanism

Published: 25 January 2024 Online: 2024-01-26

CLC number:

TB332

Fund:Natural Science Foundation of Shandong Province, China(ZR2020QA040), and China Postdoctoral Science Foundation(2021M691853).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Ru
	JIANG Ning
	XU Jiachuan
	LI Di

Cite this article:

ZHANG Ru,JIANG Ning,XU Jiachuan, et al. Research Progress on Hygrothermal Aging of Plant Fiber Reinforced Polymer Composites[J]. Materials Reports, 2024, 38(2): 22030076-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22030076 OR http://www.mater-rep.com/EN/Y2024/V38/I2/22030076

1 Zhang C H, Wang R H, Chen Q L, et al. Materials Reports, 2007, 21(10), 35 (in Chinese).
张春红, 王荣华, 陈秋玲, 等. 材料导报, 2007, 21(10), 35.
2 Estrada L H, Pillay S, Vaidya U. In: Conference Record of the 2008 ACCE 4th Annual Automotive Composites Conference and Exhibition. Michigan, 2008, pp. 16.
3 Bax B, Müssig J. Composites Science and Technology, 2008, 68(7), 1601.
4 Oksman K, Skrifvars M, Selin J F. Composites Science and Technology, 2003, 9(63), 1317.
5 Yeo J C C, Muiruri J K, Thitsartarn W, et al. Materials Science and Engineering C, 2018, 92, 1092.
6 Tong S Y, Lim P N, Wang K, et al. Materials Technology, 2018, 33(11), 754.
7 Gorshkova T, Brutch N, Chabbert B, et al. Critical Reviews in Plant Sciences, 2012, 31(3), 201.
8 Bessadok A, Langevin D, Gouanvé F, et al. Carbohydrate Polymers, 2009, 76(1), 74.
9 Moudood A, Rahman A, Öchsner A, et al. Journal of Reinforced Plastics and Composites, 2019, 38(7), 323.
10 Silva A M B, Luz S M, Siva I, et al. Sustainable Polymer Composites and Nanocomposites, 2019, 977, 999.
11 Biagiotti J, Puglia D, Kenny J M. Journal of Natural Fibers, 2004, 1(2), 37.
12 Kabir M M, Wang H, Lau K T, et al. Composites Part B: Engineering, 2012, 43(7), 2883.
13 Bian J Y, Liu J, Bao Z. Materials Reports, 2016, 30(Z2), 340 (in Chinese).
边佳燕, 刘钧, 鲍铮. 材料导报, 2016, 30(Z2), 340.
14 Idolor O, Guha R, Berkowitz K, et al. In: Conference Record of the 2020 35th Proceedings of the American Society for Composites 35th Technical Conference. North Carolina, 2020, pp. 27695.
15 Scida D, Assarar M, Poilâne C, et al. Composites Part B: Engineering, 2013, 48, 51.
16 Abanilla M A, Li Y, Karbhari V M. Composites Part B: Engineering, 2005, 37(2), 200.
17 Weitsman Y. International Journal of Solids & Structures, 1979, 15(9), 701.
18 Weitsman Y J. International Journal of Solids and Structures, 1987, 23(7), 1003.
19 Weitsman Y, Beltzer A I. International Journal of Solids and Structures, 1992, 29(11), 1417.
20 Saikia D. International Journal of Thermophysics, 2010, 31(4), 1020.
21 Jiang N, Li Y, Li D, et al. Composites Science and Technology, 2020, 199, 108313.
22 Kumar S, Meena R S, Singh R K, et al. Scientific Reports, 2021, 11(1), 1.
23 Panthapulakkal S, Sain M. Journal of Composite Materials, 2007, 41(15), 1871.
24 Moudood A, Rahman A, Khanlou H M, et al. Composites Part B: Engineering, 2019, 171, 284.
25 Jiang N, Li Y, Li Y, et al. Polymer Degradation and Stability, 2020, 178, 109214.
26 Duigou L A, Davies P, Baley C. Polymer Degradation and Stability, 2009, 94(7), 1151.
27 Bledzki A K, Faruk O. Composites Science and Technology, 2004, 64(5), 693.
28 Al-Maharma A Y, Al-Huniti N. Journal of Composites Science, 2019, 3(1), 27.
29 Toubal L, Cuillière J C, Bensalem K, et al. Polymer Composites, 2016, 37(8), 2342.
30 Singh J I P, Singh S, Dhawan V. Polymers and Polymer Composites, 2020, 28(4), 273.
31 Chen H, Miao M, Ding X. Composites Part A: Applied Science and Manufacturing, 2009, 40(12), 2013.
32 Peirce F T. Journal of the Textile Institute Transactions, 1929, 20(6), 133.
33 Dhakal H N, Zhang Z Y, Bennett N, et al. Journal of Composite Mate-rials, 2014, 48(11), 1399.
34 Kushwaha P K, Kumar R. Polymer-Plastics Technology and Engineering, 2009, 49(1), 45.
35 Cheour K, Assarar M, Scida D, et al. Composite Structures, 2016, 152, 259.
36 Jiang N, Li Y, Yu T, et al. Polymer Composites, 2020, 41(3), 1003.
37 Jia Y L. Acta Materiae Compositae Sinica, 2022, 39(2), 608 (in Chinese).
贾云龙. 复合材料学报, 2022, 39(2), 608.
38 Pisupati A, Bonnaud L, Deléglise-Lagardère M, et al. Applied Composite Materials, 2021, 28(3), 633.
39 Panthapulakkal S, Sain M. Journal of Applied Polymer Science, 2007, 103(4), 2432.
40 Espert A, Vilaplana F, Karlsson S. Composites Part A: Applied Science and Manufacturing, 2004, 35(11), 1267.
41 Assarar M, Scida D, El Mahi A, et al. Materials & Design, 2011, 32(2), 788.
42 Stamboulis A, Baillie C A, Garkhail S K, et al. Applied Composite Materials, 2000, 7(5), 273.
43 Hu R H, Sun M, Lim J K. Materials & Design, 2010, 31(7), 3167.
44 Chizyuka C G, Munakaampe G M, Kanyanga S B. Journal of Natural and Applied Sciences, 2016, 2(1), 39.
45 Stamboulis A, Baillie C A, Peijs T. Composites Part A: Applied Science and Manufacturing, 2001, 32(8), 1105.
46 Li Y, Xue B. Polymer Degradation and Stability, 2016, 126, 144.
47 Duigou L A, Davies P, Baley C. Composites Part A: Applied Science and Manufacturing, 2013, 48, 121.
48 Zhou Y, Fan M, Chen L. Composites Part B: Engineering, 2016, 101, 31.
49 Amiandamhen S O, Meincken M, Tyhoda L. Fibers and Polymers, 2020, 21(4), 677.
50 Brodowsky H, Mäder E. Composites Science and Technology, 2012, 72(10), 1160.
51 Sethi S, Ray B C. Advances in Colloid and Interface Science, 2015, 217, 43.
52 Azwa Z N, Yousif B F, Manalo A C, et al. Materials & Design, 2013, 47, 424.
53 Jiang N, Yu T, Li Y. Journal of Polymers and the Environment, 2018, 26(8), 3176.
54 Jiang N, Yu T, Li Y, et al. Composites Science and Technology, 2019, 173, 15.
55 Cadu T, Van Schoors L, Sicot O, et al. Industrial Crops and Products, 2019, 141, 111730.
56 Paunonen S, Berthold F, Immonen K. Journal of Applied Polymer Science, 2020, 137(42), 49617.
57 Si S, Tang Q, Li X G. Journal of Renewable Materials, 2021, 9(12), 2209.
58 Yu T, Sun F, Lu M, et al. Polymer Composites, 2018, 39(4), 1098.
59 Ma Y F, Zhang W, Wang C P, et al. Materials Reports, 2011, 25(19), 5 (in Chinese).
马玉峰, 张伟, 王春鹏, 等. 材料导报, 2011, 25(19), 5.
60 Wang W, Fu R, Deng Q, et al. Fibers and Polymers, 2020, 21(12), 2888.
61 George J, Sreekala M S, Thomas S. Polymer Engineering & Science, 2001, 41(9), 1471.
62 Hamid M R Y, Ghani M H A, Ahmad S. Industrial Crops & Products, 2012, 40, 96.
63 Dittenber D B, Gangarao H. Composites Part A, 2012, 43(8), 1419.
64 Fiore V, Bella G D, Valenza A. Composites Part B:Engineering, 2015, 68, 14.
65 Han Y H, Han S O, Cho D, et al. Composite Interfaces, 2007, 14(5), 559.
66 Li X, Tabil L G, Panigrahi S. Journal of Polymers and the Environment, 2007, 15(1), 25.
67 Jain D, Kamboj I, Bera T K, et al. International Journal of Heat and Mass Transfer, 2019, 130, 431.
68 Atiqah A, Jawaid M, Ishak M R, et al. Journal of Natural Fibers, 2018, 15(2), 251.
69 Mouhoubi S, Bourahli M E H, Osmani H, et al. Journal of Natural Fibers, 2017, 14(2), 239.
70 Daniels M W, Francis L F. Journal of Colloid and Interface Science, 1998, 205 (1), 191.
71 Nishiyama N, Horie K, Asakura T. Journal of Colloid and Interface Science, 1989, 129(1), 113.
72 Vrancken K C, De Coster L, Van Der Voort P, et al. Journal of Colloid and Interface Science, 1995, 170(1), 71.
73 Salon M C B, Gerbaud G, Abdelmouleh M, et al. Magnetic Resonance in Chemistry, 2007, 45(6), 473.
74 Kusmono, Hestiawan H, Jamasri. Journal of Materials Research and Technology, 2020, 9(3), 4410.
75 Supri A G, Lim B Y. Journal of Physical Science, 2009, 20(2), 85.
76 Siqueira G, Bras J, Dufresne A. Langmuir, 2010, 26(1), 402.
77 Karmarkar A, Chauhan S S, Modak J M, et al. Composites Part A: Applied Science and Manufacturing, 2007, 38(2), 227.
78 Rozman H D, Kumar R N, Khalil H P S A, et al. European Polymer Journal, 1997, 33(8), 1213.
79 Khalil H P S A, Rozman H D, Ahmad M N, et al. Polymer-Plastics Technology and Engineering, 2000, 39(4), 757.