YSZ多孔陶瓷的孔隙结构特征及压缩强度研究

doi:10.11896/cldb.22060249

Abstract
Figure/Table
References
Related Citation (11)

Download:

Full Text ( PDF ) (13339KB)
Export: BibTeX | EndNote (RIS)

Abstract The porous YSZ ceramics were prepared by ball milling foam method using 3% (in mole) Y₂O₃ stabilized ZrO₂ as a raw material, Isobam-104 as a dispersing and gel agent, dodecyl trimethyl ammonium chloride (DTAC) as a foaming agent and foam stabilizing. The effect of solid content on the microstructure, compressive strength and compressive failure mechanism of the porous YSZ ceramics was investigated. This result shows that the total porosity and the average cell size of as-prepared porous YSZ ceramics gradually decrease and the compressive strength increases when the solid content slightly increases in the range of 30.5vol%—33.5vol% under the similar foaming rate. The total porosity of as-prepared porous YSZ sample was 79.9%—88.4% and the compressive strength was 4.7—17.2 MPa. The relationship between the compressive strength and total porosity was consistent with Rice model. Porous YSZ ceramics exhibit pseudo-plastic deformation under compressive load. And the main failure mode is shear failure.

Key words： zirconia porous ceramics ball milling foaming compression failure mechanism

Published: Online: 2023-12-19

CLC number:

TQ174

Fund:National Natural Science Foundation of China (51862009), Natural Science Foundation of Jiangxi Province(20202BABL204016, 20212BAB204019), Science and Technology Research Project of Jiangxi Province Education Department(GJJ190585), Graduate Innovation Fund Project of Jiangxi Science and Technology Normal University(YC2021-X04).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Meng
	AI Jianping
	HU Liling
	CHENG Lihong
	SHUAI Yaping
	LUO Siling
	ZHOU Zehua
	CHEN Zhiqin
	LI Wenkui

Cite this article:

LI Meng,AI Jianping,HU Liling, et al. Study on Pore Structure and Compressive Strength of Porous YSZ Ceramics[J]. Materials Reports, 2023, 37(24): 22060249-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22060249 OR http://www.mater-rep.com/EN/Y2023/V37/I24/22060249

1 Li F, Liu J X, Huang X, et al. Journal of the Chinese Ceramic Society, 2018, 46(12), 1669 (in Chinese).
李飞, 刘吉轩, 黄晓, 等. 硅酸盐学报, 2018, 46(12), 1669.
2 Wang C A, Lang Y, Hu L F, et al. Journal of Ceramics, 2017, 38(3), 296 (in Chinese).
汪长安, 郎莹, 胡良发, 等. 陶瓷学报, 2017, 38(3), 296.
3 Wang Y, Jin L, Shi X L, et al. Journal of Medical Postgraduate, 2012, 25(6), 635 (in Chinese).
王阳, 金磊, 史小蕾, 等. 医学研究生学报, 2012, 25(6), 635.
4 Cable T L, Setlock J A, Farmer S C, et al. International Journal of Applied Ceramic Technology, 2011, 8(1), 1.
5 Ai J P, Hu L L, Su K Y, et al. Journal of Jiangxi Science & Technology Normal University, 2019(6), 17 (in Chinese).
艾建平, 胡丽玲, 苏开禹, 等. 江西科技师范大学学报, 2019(6), 17.
6 Zou J Z, Xiong H W, Huang Y J, et al. The Chinese Journal of Nonferrous Metals, 2021, 31(8), 2059 (in Chinese).
邹金住, 熊慧文, 黄玉娟, 等. 中国有色金属学报, 2021, 31(8), 2059.
7 Dong Y, Wang C A, Zhou J, et al. Journal of the European Ceramic Society, 2012, 32(10), 2213.
8 Dong Y, Wang C A, Zhou J. Journal of Materials Science, 2012, 47(17), 6326.
9 Pia G, Casnedi L, Sanna U. Ceramics International, 2016, 42(5), 5802.
10 Yu H B, Liang S S, Li J. et al. Materials Reports, 2022, 36(8), 1 (in Chinese).
于海博, 梁帅帅, 李疆, 等. 材料导报, 2022, 36(8), 1.
11 Feng X, Li W F, Guo H S, et al. Journal of Ceramics, 2022, 43(2), 186 (in Chinese).
冯鑫, 李文凤, 郭会师, 等. 陶瓷学报, 2022, 43(2), 186.
12 Dong Y F, Wang X Y, Li Z H, et al. Ceramics, 2007(7), 50 (in Chinese).
董毅峰, 王雪瑶, 李志宏, 等. 陶瓷, 2007(7), 50.
13 Yuang Q, Tan H, Yang T W, et al. Bulletin of the Chinese Ceramic So-ciety, 2021, 40(8), 2687 (in Chinese).
袁绮, 谭划, 杨廷旺, 等. 硅酸盐通报, 2021, 40(8), 2687.
14 Wang S W, Jin Z Z, Huang L R. Bulletin of the Chinese Ceramic Society, 2006(4), 124(in Chinese).
王圣威, 金宗哲, 黄丽容. 硅酸盐通报, 2006(4), 124.
15 Jun I K, Koh Y H, Kim H E. Materials Letters, 2006, 60(7), 878.
16 Hu L F, Wang C A, Sun C C, et al. Aerospace Material Technology, 2010, 40(2), 55 (in Chinese).
胡良发, 汪长安, 孙陈诚, 等. 宇航材料工艺, 2010, 40(2), 55.
17 Hu L Y, Zhang Y M, Zhang S M, et al. Materials Letters, 2012, 82, 152.
18 Li C W, Deng N N, Wang C A, et al. Journal of the Chinese Ceramic Society, 2019, 47(9), 1214 (in Chinese).
李翠伟, 邓娜娜, 汪长安, 等. 硅酸盐学报, 2019, 47(9), 1214.
19 Tang X Y, Zhang Z J, Yang J L, et al. Journal of the Chinese Ceramic Society, 2018, 46(6), 772 (in Chinese).
唐欣悦, 张在娟, 杨金龙, 等. 硅酸盐学报, 2018, 46(6), 772.
20 Wen J B, Niu M, Wang H J, et al. Journal of the Chinese Ceramic Society, 2019, 47(9), 1198 (in Chinese).
温江波, 牛敏, 王红洁, 等. 硅酸盐学报, 2019, 47(9), 1198.
21 Hao B L, Chen S L, Wang C A, et al. Journal of the Chinese Ceramic Society, 2019, 47(9), 1242 (in Chinese).
郝边磊, 陈仕乐, 汪长安, 等. 硅酸盐学报, 2019, 47(9), 1242.
22 Li L Y, Du H Y, Wu J Y, et al. Journal of the Chinese Ceramic Society, 2019, 47(9), 1191 (in Chinese).
李玲玉, 杜海燕, 武劲宇, 等. 硅酸盐学报, 2019, 47(9), 1191.
23 Xu J F, Liu C J. Foshan ceramic, 2011, 21(10), 25 (in Chinese).
余剑峰, 刘春江. 佛山陶瓷, 2011, 21(10), 25.
24 Yin L Y, Zhou X G, Yu J S, et al. Journal of Porous Materials, 2015, 22(5), 1357.
25 Wang H, Li C W, Li H, et al. Journal of the Chinese Ceramic Society, 2020, 48(6), 824 (in Chinese).
王涵, 李翠伟, 李昊, 等. 硅酸盐学报, 2020, 48(6), 824.
26 Kim I J, Park J G, Han Y H, et al. Journal of the Korean Ceramic Society, 2019, 56(3), 211.
27 Gonzenbach U T, Studart A R, Tervoort E, et al. Angewandte Chemie International Edition, 2006, 45(21), 3526.
28 Zhao J. Ceramic foams fabricated from particle-stabilized foams with surfactant as hydrophobic modifier. Ph. D. Thesis, University of Chinese Academy of Sciences, China, 2018 (in Chinese).
赵瑾. 表面活性剂疏水修饰陶瓷颗粒制备泡沫陶瓷. 博士学位论文, 中国科学院大学, 2018.
29 Wang S W. Journal of Inorganic Materials, 2022(8), 809 (in Chinese).
王士维. 无机材料学报, 2022(8), 809.
30 Zhao J, Shi M S, Wang S W, et al. Physicochemical and Engineering Aspects, 2018, 537, 210.
31 Du Z P, Yao D X, Xia Y F, et al. Journal of the American Ceramic Society, 2019, 102(11), 6827.
32 Xi J J, Mei X, Li F, et al. Industrial Technology & Vocational Education, 2020, 18(4), 73 (in Chinese).
席晶晶, 梅啸, 李飞. 工业技术与职业教育, 2020, 18(4), 73.
33 Wu W H, Zhang H J, Zhang S W, et al. Journal of the Chinese Ceramic Society, 2020, 48(9), 1359 (in Chinese).
吴文浩, 张海军, 张少伟. 硅酸盐学报, 2020, 48(9), 1359.
34 Huo W L, Zhang X Y, Chen Y G, et al. Journal of the American Ceramic Society, 2016, 99(11), 3512.
35 Meng X, Xu J, Zhu J, et al. Journal of Materials Science, 2020, 55(31), 15106.
36 Du Z P, Yao D X, Xia Y F, et al. Ceramics International, 2020, 46(9), 12942.
37 Wang Q, Xi H L, Zuo Y J. Journal of Chemical Industry & Engineering, 2007(2), 25 (in Chinese).
王琦, 习海玲, 左言军. 化学工业与工程技术, 2007(2), 25.
38 Rand P B, Kraynik A M. Society of Petroleum Engineers Journal, 1983, 23(1), 152.
39 Chuanuwatanakul C, Tallon C, Dunstan D E, et al. Soft Matter, 2011, 7(24), 11464.
40 Wu Z, Sun L C, Pan J J, et al. Journal of the American Ceramic Society, 2018, 101(3), 1042.
41 Lian C, Zhuge Y, Beecham S. Construction and Building Materials, 2011, 25(11), 4294.
42 Wang Q, Chen Q, Zhu J, et al. Materials Chemistry and Physics, 2008, 109(2), 488.
43 Ryshkewitch E. Journal of the American Ceramic Society, 1953, 36(2), 65.
44 Savchenko N, Sevostyanova I, Sablina T, et al. American Institute of Physics, 2014, 1623(1), 547.
45 Lang Y. Preparation and properties of fiber-reinforced porous YSZ ceramics. Ph. D. Thesis, Tsinghua University, China, 2014 (in Chinese).
郎莹. 纤维增强多孔 YSZ 陶瓷材料的制备和性能研究. 博士学位论文, 清华大学, 2014.
46 Ai J P, Zhou G H, Wang S W, et al. Ceramics International, 2014, 40, 835.
47 Wu L H, Li C W, Wang C A, et al. International Journal of Applied Ceramic Technology, 2020, 17, 2104.
48 Sun J J, Hu Z J, Li J N, et al. Ceramics International, 2014, 40(8), 11787.
49 Jun I K, Koh Y H, Song J H, et al. Materials Letters, 2006, 60(20), 2507.