聚硅氧烷转化制备硅氧碳多孔陶瓷的研究进展<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.019.013

Abstract
Figure/Table
References (48)
Related Citation (9)

Download:

Full Text ( PDF ) (1817KB)
Export: BibTeX | EndNote (RIS)

Abstract Silicon oxycarbide porous ceramics have promising application due to its characteristics of high temperature resis-tance, low density, high specific strength, high specific surface area, low thermal conductivity as well as excellent dielectric properties. Pyrolytic ceramization of preceramic polymer precursors has a bright prospect in producing ceramics. Based on a brief introduction to polysiloxanes, this article reviews the research status of preparing silicon oxycarbide porous ceramics from polysiloxanes, with an emphasis on the specific pore structures formed before, during and after pyrolysis. It also discusses some emerging issues in the field.

Key words： polysiloxane silicon oxycarbide porous ceramic pyrolysis porosification

Published: 07 May 2018

CLC number:

TQ174

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Junzhan
	ZHANG Haisheng
	ZHANG Ying
	HE Hui

Cite this article:

ZHANG Junzhan,ZHANG Haisheng,ZHANG Ying, et al. Research Developments in the Preparation of Silicon Oxycarbide Porous Ceramics via Pyrolytic Ceramization of Polysiloxanes[J]. Materials Reports, 2017, 31(19): 91-96.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.019.013 OR http://www.mater-rep.com/EN/Y2017/V31/I19/91

1 Colombo P, Raj R. Preface[M]//Advances in polymer derived ceramics and composites. USA: the American Ceramic Society,2010.
2 Vakifahmetoglu C, Zeydanli D, Colombo P. Porous polymer derived ceramics[J]. Mater Sci Eng R: Rep,2017,106:1.
3 Adler P N. Overview of ARPA low-cost ceramic composites (LC³) program [C]//41st International Symposium of the Society for the Advancement of Material and Process Engineering and Exhibition.Covina,CA,1996.
4 Colombo P. Novel processing of silicon oxycarbide ceramic foams[J]. Adv Eng Mater,1999,1(3-4):203.
5 Kaspar J, Graczyk-Zajac M, Riedel R. Lithium insertion into carbon-rich SiOC ceramics: Influence of pyrolysis temperature on electrochemical properties[J].J Power Sources,2013,244(244):450.
6 Narisawa M, et al. Oxidation process of white Si-O-C(-H) ceramics with various hydrogen contents[J]. Scr Mater,2013,69(8):602.
7 Ma Q S, Chen Z H, Zheng W W, et al. Processing and characterization of particles reinforced Si O C composites via pyrolysis of polysiloxane with SiC or/and Al fillers[J]. Ceram Int,2005,31(8):1045.
8 Bergero L, Sglavo V M, Soraru G D. Processing and thermal shock resistance of a polymer-derived MoSi₂ /SiCO ceramic composite[J]. J Am Ceram Soc,2005,88(11):3222.
9 Adam M, Wilhelm M, Grathwohl G. Polysiloxane derived hybrid ceramics with nanodispersed Pt[J]. Microp Mesop Mater,2011,151(11):195.
10 Su Q, Price L, Shao L, et al. Irradiation tolerance of amorphous SiOC/crystalline Fe composite[J]. Mater Lett,2015,155(2):1906.
11 Qiu L, et al. Thermal-conductivity studies of macro-porous polymer-derived SiOC ceramics[J]. Int J Thermophys,2014,35(1):76.
12 Pradeep V S, Ayana D G, Graczyk-Zajac M, et al. High rate capability of SiOC ceramic aerogels with tailored porosity as anode materials for Li-ion batteries[J]. Electrochim Acta,2015,157:41.
13 Narisawa M. Silicone resin applications for ceramic precursors and composites[J]. Materials,2010,3(6):3518.
14 Lu K. Porous and high surface area silicon oxycarbide-based mate-rials—A review[J]. Mater Sci Eng R:Rep,2015,97:23.
15 Ma Y, Ma Q S, Chen Z H. Present sate of prous cramics by peceramic plymer prolysis[J].J Mater Eng,2007(3):62(in Chinese).
马彦, 马青松, 陈朝辉. 先驱体转化法制备多孔陶瓷的发展现状[J]. 材料工程,2007(3):62.
16 Tian H. Fabrication and characterization of highly porous SiOC cera-mics from silicone resin[D].Changsha: University of Defense Tech-nology,2011(in Chinese).
田浩.硅树脂转化制备高孔隙率SiOC多孔陶瓷研究[D]. 长沙:国防科学技术大学,2011.
17 Colombo P. Engineering porosity in polymer-derived ceramics[J]. J Eur Ceram Soc,2008,28(7):1389.
18 Yan X, et al. Phase separation induced macroporous SiOC ceramics derived from polysiloxane[J].J Eur Ceram Soc,2015,35(35):443.
19 Strachota A, Cˇerný M, Chlup Z, et al. Foaming of polysiloxane re-sins with ethanol: A new route to pyrolytic macrocellular SiOC foams[J]. Ceram Int,2015,41(10):13561.
20 Nedunchezhian S, Sujith R, Kumar R. Processing and characterization of polymer precursor derived silicon oxycarbide ceramic foams and compacts[J]. J Adv Ceram,2013,2(4):318.
21 Cˇerný M, Chlup Z, Strachota A, et al. Si O C ceramic foams derived from polymethylphenylsiloxane precursor with starch as foaming agent[J]. J Eur Ceram Soc,2015,35(13):3427.
22 Rocha R M, Moura E A B, Bressiani A H A. SiOC ceramic foams synthesized from electron beam irradiated methylsilicone resin[J].J Mater Sci,2008,43(13):4466.
23 Liu H L, Zhong W W, Mao Y W. Preparation of SiOC foam cera-mics using polysiloxane[J]. Key Eng Mater,2008,368-372:920.
24 Pan J M, Cheng X N, Yan X H, et al. In situ synthesis and growth mechanism of SiC nanowires in SiCO porous ceramics [J]. Inorg Mater,2013,28(5):474(in Chinese).
潘建梅, 程晓农, 严学华, 等. 多孔SiCO陶瓷中SiC纳米线的原位合成及生长机理[J]. 无机材料学报,2013,28(5):474.
25 Colombo P, Modesti M. Silicon oxycarbide ceramic foams from a preceramic polymer[J]. J Am Ceram Soc,1999,82(3):573.
26 Colombo P, Modesti M. Silicon oxycarbide foams from a silicone preceramic polymer and polyurethane[J].J Sol-Gel Sci Technol,1999,14(1):103.
27 Naviroj M, Miller S M, Colombo P, et al. Directionally aligned macroporous SiOC via freeze casting of preceramic polymers[J]. J Eur Ceram Soc,2015,35(8):2225.
28 Zhang H, Nunes P D A, Wilhelm M, et al. Hierarchically ordered micro/meso/macroporous polymer-derived ceramic monoliths fabricated by freeze-casting[J].J Eur Ceram Soc,2016,36(1):51.
29 Kim Y W, Park C B. Processing of microcellular preceramics using carbon dioxide[J]. Compos Sci Technol,2003,63(16):2371.
30 Takahashi T, et al. SiOC ceramic foams through melt foaming of a methylsilicone preceramic polymer[J].J Porous Mater,2003,10(2):113.
31 Kim Y W, Lee K H, Lee S H, et al. Fabrication of porous silicon oxycarbide ceramics by foaming polymer liquid and compression molding[J]. J Ceram Soc Jpn,2003,111(1299):863.
32 Liu H L, Hu M. Fabrication of SiOC ceramic foam with silicon resin and polyvinyl butyral[J]. Rare Met Mater Eng,2009,38(S2):369(in Chinese).
刘洪丽, 胡明. 以PVB为造孔剂采用硅树脂制备泡沫陶瓷[J]. 稀有金属材料与工程,2009,38(S2):369.
33 Adam M, Kocanis S, Fey T, et al. Hierarchically ordered foams derived from polysiloxanes with catalytically active coatings[J].J Eur Ceram Soc,2014,34(7):1715.
34 Park C B, Wang C M, Wang J, et al. Processing of porous silicon oxycarbide ceramics from extruded blends of polysiloxane and low-density polyethylene[J]. J Ceram Process Res,2009,10(2):238.
35 Kim Y W, Jin Y J, Chun Y S, et al. A simple pressing route to closed-cell microcellular ceramics[J]. Scr Mater,2005,53(8):921.
36 Colombo P, Bernardo E, Biasetto L. Novel microcellular ceramics from a silicone resin[J].J Am Ceram Soc,2004,87(1):152.
37 Shibuya M, Takahashi T, Koyama K. Microcellular ceramics by using silicone preceramic polymer and PMMA polymer sacrificial microbeads[J]. Compos Sci Technol,2007,67(1):119.
38 Kim S H, Kim Y W, Park C B. Effect of inert filler addition on pore size and porosity of closed-cell silicon oxycarbide foams[J]. J Mater Sci,2004,39(10):3513.
39 Eom J H, Kim Y W. Fabrication of silicon oxycarbide foams from extruded blends of polysiloxane, low-density polyethylene (LDPE), and polymer microbead[J]. Met Mater Int,2007,13(6):521.
40 Wang C, et al. Fabrication of cellular and microcellular ceramics with controllable open-cell content from polysiloxane-LDPE blends: I. Compounding and foaming[J]. J Mater Sci,2007,42(8):2854.
41 Kim Y W, Wang C, Park C B. Processing of porous silicon oxycarbide ceramics from extruded blends of polysiloxane and polymer microbead[J]. J Ceram Soc Jpn,2007,115(1343):419.
42 Vakifahmetoglu C, Balliana M, Colombo P. Ceramic foams and micro-beads from emulsions of a preceramic polymer[J]. J Eur Ceram Soc,2011,31(8):1481.
43 Dibandjo P, Graczyk-Zajac M, Riedel R, et al. Lithium insertion into dense and porous carbon-rich polymer-derived SiOC ceramics[J]. J Eur Ceram Soc,2012,32(10):2495.
44 Li J K, Lu K. Highly porous SiOC bulk ceramics with water vapor assisted pyrolysis[J]. J Am Ceram Soc,2015,98(8):2357.
45 Li J K, Lu K, Lin T, et al. Preparation of micro-/mesoporous SiOC bulk ceramics[J]. J Am Ceram Soc,2015,98(6):1753.
46 Duan L Q, Ma Q S, Chen Z H. Etching process of silicon oxycarbide from polysiloxane by chlorine[J]. Corros Sci,2015,94(87):237.
47 Yuan X Y, Jin H L, Yan X B, et al. Synthesis of ordered mesoporous silicon oxycarbide monoliths via preceramic polymer nanocas-ting[J]. Microp Mesop Mater,2012,147(1):252.
48 Duan L Q, Ma Q S, Chen Z H. Preparation and characterization of mesoporous silicon oxycarbide ceramics without free carbon from polysiloxane[J]. J Eur Ceram Soc,2013,33(4):841.