泡沫铝连接件焊接工艺的应用现状与展望<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.019.009

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1377KB)
Export: BibTeX | EndNote (RIS)

Abstract Aluminum foams (AF) is a novel material with structural and functional properties. Taking full advantages of aluminum foams, AFS is often combined with dense metal to improve the comprehensive mechanical properties and reduce cost, the obtained structure is named sandwich. There are lots of connection means for sandwich structure, but welding is the most reliable way to connect AFS. In this paper, the characteristics of aluminum foams and welding problems are introduced, the welding methods including conventional arc welding, laser welding, brazing, diffusion welding, friction stir welding, plasma arc welding and ultrasonic welding are reviewed.The limitations of each process are discussed, and finally the development direction of the welding process is analyzed.

Key words： aluminum foam welding technique brazing diffusion welding transient liquid phase-diffusion bonding

Published: 07 May 2018

CLC number:	TG146.21
	TB33

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HUANG Bensheng
	ZHAO Xing
	WU Xupeng
	LIU Duansu
	ZENG Qiang

Cite this article:

HUANG Bensheng,ZHAO Xing,WU Xupeng, et al. Current Application Status and Prospect of Welding Techniques for Aluminum Foam Joints[J]. Materials Reports, 2017, 31(19): 66-71.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.019.009 OR http://www.mater-rep.com/EN/Y2017/V31/I19/66

1 Liu Peisheng, Li Tiefan, Fu Chao,et al. Application of porous metal materials[J]. J Funct Mater, 2001,32(1):12(in Chinese).
刘培生, 李铁藩, 傅超,等. 多孔金属材料的应用[J]. 功能材料,2001,32(1):12.
2 Wang Z, Ma H, Zhao L, et al. Studies on the dynamic compressive properties of open-cell aluminum alloy foams[J]. Key Eng Mater,2006,54(1):83.
3 Banhart John. Manufacture, characterization and application of cellular metals and metalfoams[J]. Prog Mater Sci,2001,46(6):559.
4 Hutter C, Zenklusen A. Axial dispersion in metal foams and streamwise-periodic porous media[J]. Chem Eng Sci, 2011,66(6):1132.
5 Kulkarni N,Mahfuz H,Jeelani S.Fatigue crack growth and life prediction of foam core sandwich composites under flexural loading[J]. Compos Struct,2003,59(4):499.
6 Zhang Min, Chen Changjun, Yao Guangchun. Manufacturing technology of Al foam sandwich[J]. Mater Rev, 2008,22(1):85(in Chinese).
张敏, 陈长军, 姚广春. 泡沫铝夹芯板的制备技术[J]. 材料导报,2008,22(1):85.
7 Potluri P, Kusak E, Reddy T Y. Novel stitch-bonded sandwich composite structures[J]. Compos Struct,2003, 59(2):251.
8 Cao Haiyang, Zhang Min, et al. Research on CO₂ gas-shielded wel-ding process andthe property of aluminum foam[J]. Surf Eng Remanuf,2016,32(3):16(in Chinese).
曹海杨,张敏,等. 泡沫铝材料的CO₂气体保护焊接工艺及性能研究[J]. 表面工程与再制造, 2016,32(3):16.
9 Zhang Di. Investigation on laser welding and manufacture tech-nology of aluminum foam[D]. Tianjin: Tianjin University,2012(in Chinese).
张迪. 泡沫铝激光焊接及制备技术研究[D]. 天津:天津大学,2012.
10 Chen Nannan, Feng Yi, Chen Jie, et al.Properties of aluminum foam joints during contact reactive brazing processes[J]. Trans China Weld Inst,2013,34(4):77(in Chinese).
陈楠楠,风仪,陈杰,等. 泡沫铝接触反应钎焊工艺及性能[J]. 焊接学报,2013, 34(4):77.
11 Tong Daochi. Preparation of small-diameter spherical hole aluminum foam and research on the problem of welding heating[D]. Nanjing: Southeast University,2009(in Chinese).
童道池. 小孔径球形孔泡沫铝的制备及泡沫铝焊接热问题研究[D], 南京:东南大学,2009.
12 张文钺. 焊接冶金学[M]. 北京:机械工程出版社,2012:16.
13 GianlucaD’Urso,Giancarlo Maccarini. The formability of aluminum foam sandwich panels[J].Int J Mater Forming,2012,5(3):243.
14 Nowacki J, Moraniec K. Welding of metallic AlSi foams and AlSi-SiC composite foams[J]. Archives Civil Mech Eng,2015(5):940.
15 Liu Fengyao, Yang Chunli, Lin Sanbao, et al. Mechanism of increasing A-TIG welding penetration[J]. Acta Metall Sin,2003,39(6):661(in Chinese).
刘凤尧,杨春利,林三宝,等. 活性化TIG焊熔深增加机理的研究[J]. 金属学报,2003,39(6):661.
16 李亚江. 特种连接技术[M]. 北京:机械工业出版社,2015:50.
17 Zhou Guangtao, Wang Xinzhu. Performance of composite sandwich beam with Al foam core in bending[J]. J Chongqing Institute of Technology (Nat Sci Ed),2011,25(12):50(in Chinese).
周广涛, 王新筑. 铝泡沫复合材料夹芯梁的弯曲性能[J]. 重庆理工大学学报(自然科学版),2011,25(12):50.
18 Kathuria Y P. Laser assisted aluminum foaming[J]. Surf Coat Technol,2001,144(7):56.
19 Kathuria Y P. Nd-YAG laser assisted aluminum foaming[J]. J Mater Processing Technol,2003,142(2):466.
20 Song Yufeng. Preparation, microstructure and mechanical properties of Al foam and Al foam sandwich panels[D]. Changsha: Central South University,2014(in Chinese).
宋宇峰. 泡沫铝及其连接件的制备工艺与组织性能研究[D]. 长沙:中南大学,2014.
21 Bernardo F. Sviluppo di procedimenti di saldatura LASER e LASER arco per pannelli AFS (Aluminum Foam Sandwich)[D]. Universita Degli Studi Di Salerno,2010.
22 齐永田. 钎焊技术问题[M]. 北京:化学工业出版社,2015:2.
23 Wang Hui, He Deping, Chu Xuming, et al. Interface structure of N₂-shielded furnace brazing of Al foam and its mechanicalproperties[J]. Trans China Welding Institute,2008,29(10):1(in Chinese).
王辉,何德坪,褚旭明,等. 泡沫铝氮气保护炉中钎焊界面结构及力学性能[J], 焊接学报,2008,29(10):1.
24 Matthes K J, Lang H. Brazing of aluminum foam with cellular filler matals[C]∥Cellular Metals and Metals Foaming Technology. Bremen: Verlag MIT Publishing,2001.
25 Li Junhui. Research on brazing process and the property of aluminum foam[D]. Tianjin: Hebei University of Technology,2015(in Chinese).
李军晖. 泡沫铝钎焊工艺及性能的研究[D].天津:河北工业大学,2015.
26 Chen Nannan. Research on vacuum brazing and contact reactive brazing of aluminum foam[D]. Heifei: Hefei University of Technology,2012(in Chinese).
陈楠楠. 泡沫铝真空钎焊和接触反应钎焊的研究[D]. 合肥:合肥工业大学,2012.
27 Lu Xilong, et al. Effects of brazing vacuum degree on microstructure and mechanical properties of copper and hafnium brazed joints[J]. Shanghai Nonferrous Metals,2014,35(3):111(in Chinese).
路希龙,等. 钎焊真空度对铜铪钎焊接头组织及性能的影响[J]. 上海有色金属,2014,35(3):111.
28 Niu Zhiwei, Huang Jihua, Xu et al. Current research status and prospect of brazing filler metals for aluminum and aluminum alloys[J]. Chin J Nonferrous Metals,2016,26(1):77(in Chinese).
牛志伟,黄继华,等. 铝及合金钎焊用硬钎料的研究现状与展望[J]. 中国有色金属学报,2016,26(1):77.
29 Zhang G W, Bao Y F, Jiang Y F, et al. Microstructure and mecha-nical properties of 6063 aluminum alloy brazed joints with Al-Si-Cu-Ni-RE filler metal[J]. J Mater Eng Perform,2011,20(8):1451.
30 Wang S S, et al.Corrosion behaviors of Al-Si-Cu(Sn, Zn) brazing filler metals[J]. Mater Characterization,2001,47(5):401.
31 Xia C, Li Y, Puchkov U A, et al. Microstructure and phase constitution near the interface of Cu/Al vacuum brazing using Al-Si filler metal[J]. Vacuum,2008,82(8):799.
32 Cooper D R, Allwood J M. The influence of deformation conditions in solid-state aluminum welding processes on the resulting weld strength[J]. J Mater Process Technol,2014,214(11):2576.
33 Kitazono K, Kitajima A, et al. Solid-state diffusion bonding of closed-cell aluminum foams[J]. Mater Sci Eng,2002,327(2):128.
34 Lin Hao, Luo Hongjie, Huang Wenzhan, et al. Diffusion bonding in frabrication of aluminum foam sandwich panels[J]. J Mater Process Technol,2016,230:35.
35 Nabavi A, et al. A novel method for manufacturing of aluminum foam sandwich panels[J]. Sur Interface Anal,2010,42(4):275.
36 Xiong Huaping, Li Hong, Mao Wei, et al. Reviews on latest advances in brazing and soldering technologies[J]. Trans China Wel-ding Inst,2011,32(5):108(in Chinese).
熊华平, 李红, 毛唯,等. 国际钎焊技术最新进展[J]. 焊接学报,2011,32(5):108.
37 Yan Jingrun, Ren Yucan, Wu Weijing, et al. Effect of diffusion welding process on properties of welded joints of 7075 alloy[J]. Hot Working Technol,2014,43(9):219(in Chinese).
颜景润,任玉灿,吴伟静,等. 扩散焊工艺对7075铝合金焊接接头性能的影响[J]. 热加工工艺,2014,43(9):219.
38 Abdolhamid A, Hossein A. Effect of welding temperature and duration on properties of 7075 Al to AZ31B Mg diffusion bonded joint[J]. Trans Nonferrous Metals Soc China,2016,26(1):84.
39 Duvall D S, Owczarski W A, et al. TLP bonding: A new method for joining heat resistant alloys[J]. Welding J,1974,53(4):203.
40 Li Z, Fearis W, North T H. Particulate segregation and mechanical properties in transient liquid phase bonded metal matrix composite[J]. Mater Sci Technol,1995,30(11):363.
41 Askew J R, et al. Transient liquid phase bonding of 2124 aluminum metal matrix composite[J]. Mater Sci Technol,1998,14:920.
42 Zhang Guifeng, Zhang Jianxun, Wang Shiyuan,et al. Similarities and differences in main characteristics between transient liquid phase bonding and brazing process[J]. Trans China Welding Institute,2002,23(6):92(in Chinese).
张贵峰,张建勋,王士元,等. 瞬间液相扩散焊与钎焊主要特点之异同[J]. 焊接学报,2002,23(6):92.
43 Horn H. Friction stir welding of alumunum foam materials[J]. Welding Res Abroad,2002,48(5):34.
44 Hangai Y, Koyama S, Hasegawa M, et al. Fabrication of aluminum foam/dense steel composite by friction stir welding[J]. Metall Mater Trans A,2010,41(9):2184.
45 Utsunomiya T, Ishii N, Hangai Y. Fabrication and tensile tests of aluminum foam sandwich with dense steel face sheets by friction stir processing route[J]. Mater Trans,2012,53(4):584.
46 Shih J S, et al. Multi-objective process optimization of pulsed plasma arc welding SS400 steel pipe with foamed aluminum liner[J]. J Adv Mech Des Syst Manuf,2012,6(2):222.
47 Liu Xiaobing, Li Peng, et al. Ultrasonic metal welding techniques[J]. Hot Working Technol,2015, 44(15):14(in Chinese).
刘晓兵,李鹏,等. 金属超声波焊接技术及其应用[J]. 热加工工艺,2015,44(15):14.
48 Born C, Wagner G, Eifler D. Ultrasonically welded aluminium foams/sheet metal-joints[J]. Adv Eng Mater,2006,8(9):816.
49 Born C, Kuckert H, Wagner G, et al. Ultrasonic torsion welding of sheet metals to cellular metallic materials[J]. Adv Eng Mater,2006,5(11):779.