金属-聚合物及金属-复合材料薄壁结构压印连接技术的研究进展

doi:10.11896/cldb.21110241

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (14049KB)
Export: BibTeX | EndNote (RIS)

Abstract With the demand of structural lightweight, metal-polymer and metal-composite thin-walled structures have been widely used in many fields such as transportation, aerospace and so on. Clinching has the advantages of high efficiency, energy saving, environmental friendliness and low cost, which provides a solution for the joining of dissimilar materials. Due to the poor ductility of polymer and its composite, to reduce the forming damage of joints, improve the joining efficiency and the mechanical properties of joints, some improved joining technologies have been proposed. In order to promote the engineering application of clinching, the clinching technologies of metal polymer and its composite thin-walled structures are reviewed, the applicability of each joining technology, forming process method, influencing factors of forming quality and mechanical properties of joints are discussed. Finally, aiming at the problems to be solved in the design of joining process, the research direction of clinching is prospected.

Key words： fiber reinforced composite polymer mechanical clinching forming quality hybrid structures

Published: 10 February 2023 Online: 2023-02-23

CLC number:

TB332

Fund:The Natural Science Foundation of Shandong Province（ZR2022QE264) and National Natural Science Foundation of China (52272364).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Yang
	ZHUANG Weimin

Cite this article:

LIU Yang,ZHUANG Weimin. Research Progress on Clinching Technologies for Metal-Polymer and Metal-Composite Thin-walled Structures[J]. Materials Reports, 2023, 37(3): 21110241-12.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21110241 OR http://www.mater-rep.com/EN/Y2023/V37/I3/21110241

1 Li Y B, Ma Y W, Lou M, et al. Journal of Mechanical Engineering, 2016, 52(24), 1 (in Chinese).
李永兵, 马运五, 楼铭, 等. 机械工程学报, 2016, 52(24), 1.
2 Song Y L, Yang L, Guo W, et al. Materials Reports A:Review Papers, 2016,30(9), 16 (in Chinese).
宋燕利, 杨龙, 郭巍, 等. 材料导报:综述篇, 2016, 30(9), 16.
3 Alshammari B A, Alsuhybani M S, Almushaikeh A M, et al. Polymers, 2021, 13(15), 2474.
4 Xu X Z, Liu T, Wang W L, et al. Acta Materiae Compositae Sinica, 2019, 36(10), 2227 (in Chinese).
许现哲, 刘通, 王文丽, 等. 复合材料学报, 2019, 36(10), 2227.
5 Li Y B, Ma Y W, Lou M, et al. Journal of Mechanical Engineering, 2020, 56(6), 125 (in Chinese).
李永兵, 马运五, 楼铭, 等. 机械工程学报, 2020, 56(6), 125.
6 Qin G F, Na J X, Mu W L, et al.Composites Part B-Engineering, 2018, 154, 43.
7 Mu W L, Na J X, Tan W, et al.International Journal of Adhesion and Adhesives, 2020, 99, 102583.
8 Pramanik A, Basak A K,Dong Y, et al. Composites Part A-Applied Science and Manufacturing, 2017,101, 1.
9 Liu Y, Zhuang W M, Xie D X. Materials Reports A: Review Papers, 2020, 34(6), 11053 (in Chinese).
刘洋, 庄蔚敏, 解东旋. 材料导报:综述篇, 2020, 34(6), 11053.
10 Liu Y, Zhuang W M. Thin-Walled Structures, 2019, 144, 106340.
11 Liu Y, Zhuang W M.Acta Materiae Compositae Sinica, 2021, 38(11), 3575 (in Chinese).
刘洋, 庄蔚敏. 复合材料学报, 2021, 38(11), 3575.
12 Zhang Y, He X C, Li Z, et al. Journal of Mechanical Engineering, 2018, 54(19), 190 (in Chinese).
张越, 何晓聪, 李智, 等. 机械工程学报, 2018, 54(19), 190.
13 He X C.Science & Technology of Advanced Materials, 2017, 18(1), 381.
14 Zhou L Y, Lyu J, Lu S B. Journal of Mechanical Strength, 2016, 38(1), 54 (in Chinese).
周璐瑶, 吕婕, 陆善彬. 机械强度, 2016, 38(1), 54.
15 Jung K W, Kawahito Y, Takahashi M, et al.Materials & Design, 2013, 47, 179.
16 Zhang Z, Shan J G, Tan X H, et al.International Journal of Adhesion & Adhesives, 2016, 70, 142.
17 Balle F, Wagner G, Eifler D. Advanced Engineering Materials, 2009, 11(1-2), 35.
18 Balle F, Eifler D.Materialwissenschaft Und Werkstofftechnik, 2012, 43(4), 286.
19 Nagatsuka K, Xiao B, Wu L, et al. Science and Technology of Welding and Joining, 2018, 23(3), 181.
20 Huang Y, Meng X, Xie Y, et al.Composites Part A-Applied Science and Manufacturing, 2018, 105, 235.
21 Ahn N S, Lee C J, Lee J M, et al.Transactions of the Korean Society of Mechanical Engineers-A, 2012, 36(6), 691.
22 Lee C J, Lee J M, Ryu H Y, et al.Journal of Materials Processing Technology, 2014, 214(10), 2169.
23 Lee S H, Lee C J, Lee K H, et al. Advances in Mechanical Engineering, 2014, 6, 810864.
24 Lee C J, Lee S H, Lee J M, et al.International Journal of Precision Engineering & Manufacturing, 2014, 15(6), 1151.
25 Lee C J, Kim B M, Kang B S, et al.Composite Structures, 2017, 173, 58.
26 Shan H, Ma Y W, Niu S, et al.Journal of Materials Processing Technology, 2021, 295, 117156.
27 Li Y, Wei Z, Wang J, et al.Journal of Manufacturing Science & Engineering, 2013, 135(6), 061007.
28 Lambiase F, Paoletti A.Journal of Manufacturing Processes, 2018, 31, 812.
29 Vorderbruggen J, Meschut G.Composite Structures, 2019, 230, 111533.
30 Gay A, Roche J, Lapeyronnie P, et al.International Journal of Damage Mechanics, 2017, 26(8), 1127.
31 Liu Y, Zhuang W M, Wu S J, et al.Composite Structures, 2020, 234, 111710.
32 Liu Y, Zhuang W M, Wu S J. The International Journal of Advanced Manufacturing Technology, 2020, 106(11), 5345.
33 Lambiase F.Materials & Design, 2015, 87, 606.
34 Lambiase F, Durante M, Ilio A D.Journal of Materials Processing Technology, 2016, 236, 241.
35 Lambiase F, Ko D C.Materials & Design, 2016, 107, 341.
36 Chen C, Fan S, Han X L, et al.International Journal of Advanced Manufacturing Technology, 2017, 91, 2655.
37 Chen C, Han X L, Zhao X, et al.International Journal of Advanced Manufacturing Technology, 2017, 90, 3533.
38 Lambiase F, Ko D C.Composite Structures, 2017, 164, 180.
39 He X C, Wang Y F, Lu Y, et al. International Journal of Advanced Manufacturing Technology, 2015, 80(9-12), 2105.
40 Zhang Y, He X C, Zeng K, et al.International Journal of Advanced Manufacturing Technology, 2017, 91(9-12), 1.
41 Zhuang W M, Zhao W Z, Xie D X, et al. Journal of Mechanical Engineering, 2017, 53(20), 106 (in Chinese).
庄蔚敏, 赵文增, 解东旋, 等. 机械工程学报, 2017, 53(20), 106.
42 Han S L, Wang Z Y, Wang Z P, et al.International Journal of Advanced Manufacturing Technology, 2021, 155(1-2), 551.
43 Lambiase F, Ilio A D.Journal of Materials Processing Technology, 2015, 215, 12.
44 Lambiase F.International Journal of Advanced Manufacturing Technology, 2015, 80(9-12), 1995.
45 Murray J J, Allen T, Bickerton S, et al.Energies, 2021, 14(18), 5790.
46 Li Y, Shi H X, Li J H. Automobile Technology & Material, 2019(12), 1 (in Chinese).
李晔, 石海鑫, 李菁华. 汽车工艺与材料, 2019(12), 1.
47 Lin P C, Lin J W, Li G X, et al.The International Journal of Advanced Manufacturing Technology, 2018, 97(1), 529.
48 Lin P C, Fang J C, Lin J W, et al.Materials, 2020, 13, 4170.
49 Vorderbrüggen J, Grger B, Kupfer R, et al. In: Proceedings of the 22nd International Esaform Conference on Material Forming. Vitoria-Gasteiz, Spain, 2019, pp.050016.
50 Liang J, Jiang H, Zhang J, et al.Archives of Civil and Mechanical Engineering, 2019, 19, 240.
51 Ghorbani-Menghari H, Babalo V, Fazli A, et al. International Journal of Lightweight Materials and Manufacture, 2020, 3, 239.
52 Vahid B, Ali F, Mahdi S.Journal of Manufacturing Processes, 2018, 35, 559.
53 Salamati M, Soltanpour M, Zajkani A, et al.Journal of Manufacturing Processes, 2019, 41, 252.
54 Abibe A B, Amancio-filho S T, Santos J F, et al.Materials & Design, 2013, 46, 338.
55 Abibe A B, Sonego M, Santos J F,et al. Materials & Design, 2016, 92, 632.
56 Abibe A B, Sonego M, Canto L B, et al.Materials, 2020, 13, 1027.
57 Wang J, Yue Y, Fu C, et al.Journal of Materials Processing Technology, 2019, 277, 116422.
58 Yu Y. Research on riveting joint of carbon fiber-reinforced plastic/aluminum alloy. Master's Thesis, Yanshan University, China, 2019 (in Chinese).
于跃. 碳纤维复合材料/铝合金冲铆接合研究. 硕士学位论文, 燕山大学, 2019.
59 Hirsch F, Muller S, Machens M, et al.Journal of Materials Processing Technology, 2017, 241, 164.
60 Hu X, Haris A, Ridha M, et al. Composite Structures, 2018,189, 443.
61 Liu Y, Zhuang W M, Wu D. Thin-Walled Structures, 2020, 151, 106727.
62 Taheri-behrooz F, Esmkhani M, Yaghoobi-Chatroodi A, et al.Polymer Testing, 2016, 55, 278.
63 Park K, Kang H, Choi I, et al. Journal of Composite Materials, 2016, 50(11), 1431.
64 Dean A, Sahraee S, Reinoso J, et al.Composite Structures, 2016, 151, 162.
65 Dean A, Rolfes R.Thin-Walled Structures, 2018, 133, 134.
66 Abedini A, Butcher C, Worswick M J.International Journal of Solids and Structures, 2018, 144-145, 1.
67 Wang H, Yu Y, Min W, et al.International Journal of Solids and Structures, 2012, 49, 3693.