金属工程材料腐蚀疲劳行为研究进展

doi:10.11896/cldb.20100223

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (27688KB)
Export: BibTeX | EndNote (RIS)

Abstract Alloy steel and stainless steel and other engineering materials are subjected to cyclic load and corrosive mediumin the process of service, which leads to corrosion fatigue of engineering structures, reducing the load-bearing capability and shortening the service life of metal engineering materials. It is of great significance for the early design and the service life prediction of engineering structures to reveal the corrosion fatigue cracking law of materials in load-environment system.
The corrosion fatigue failure mechanism of metal engineering materials included crack initiation and propagation. The current researches mainly focus on crack propagation life, and relatively few on crack initiation. The mechanism of corrosion fatigue crack initiation is still controversial, and the main ideas are pitting accelerated crack formation theory, slip band preferential dissolution theory, protective film rupture theory and adsorption theory. Two viewpoints, anodic dissolution and hydrogen induced cracking, have been proposed to study the mechanism of corrosion fatigue crack propagation.
The main factors affecting corrosion fatigue life are material factors, mechanical factors and environmental factors.The researches of mechanical factors mainly focus on stress ratio, loading frequency, loading waveform. The material factors are mainly microstructure and alloying elements. Environmental factors include medium temperature, concentration, oxygen content, pH value and applied potential.
In this paper, the research status of corrosion fatigue cracking mechanism of metal engineering materials and influencing factors were reviewed. This paper also summarized the research achievements and shortcomings of metal corrosion fatigue, and on the basis of this, proposed the future research direction and development trend, to provide new ideas for researchers in related fields.

Key words： corrosion fatigue crack initiation crack growth influence factor

Published: 10 January 2023 Online: 2023-01-31

CLC number:

TG174.3

Fund:‘Chunhui’ International Cooperation Project of the Ministry of Education, and General Program of the Education Department of Liaoning Province of China (LJKZ0416).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Qishan
	HE Chuan
	CHEN Xu

Cite this article:

WANG Qishan,HE Chuan,CHEN Xu. Research Progress of Corrosion Fatigue Behavior of Metal Engineering Materials[J]. Materials Reports, 2023, 37(1): 20100223-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20100223 OR http://www.mater-rep.com/EN/Y2023/V37/I1/20100223

1 Zhao T L, Liu Z Y, Du C W, et al. International Journal of Fatigue, 2018, 110, 105.
2 Zamani S M, Hassanzadeh-Tabrizi S A, Sharifi H. Engineering Failure Analysis, 2016, 59, 605.
3 Wang Y, Zhang W H, Zheng Y Q. Applied Sciences, 2020, 10, 2293.
4 Cheng A K, Chen N Z. International Journal of Fatigue, 2017, 96, 152.
5 Liao X X, Huang Y M, Qiang B, et al. International Journal of Fatigue, 2020, 135, 105542.
6 Tan Y N, Yu J X, Yu Y, et al. Periodical of Ocean University of China, 2021, 51(6), 109(in Chinese).
谭玉娜, 余建星, 余杨, 等. 中国海洋大学学报(自然科学版), 2021, 51(6), 109.
7 Li X B, Yu J X, Wang H K, et al. Hot Working Technology, 2019, 48(10), 87(in Chinese).
李修波, 余建星, 王华昆, 等. 热加工工艺, 2019, 48(10), 87.
8 Okorokov V, Morgantini M, Gorash Y, et al. Procedia Engineering, 2018, 213, 674.
9 Turnbull A, Zhou S. Corrosion Science, 2010, 53, 503.
10 Chang H, Han E H, Wang J Q, et al. Journal of Chinese Society for Corrosion and Protection, 2006(1), 34(in Chinese).
常红, 韩恩厚, 王俭秋, 等. 中国腐蚀与防护学报, 2006(1), 34.
11 Zhang Z G, Zhou Z Y, Liu C Y. Journal of Chinese Society for Corrosion and Protection, 2008, 28(1), 48(in Chinese).
张正贵, 周兆元, 刘长勇. 中国腐蚀与防护学报, 2008, 28(1), 48.
12 Yan X S, Huang X P, Zhou X T. Ship Science and Technology, 2016, 38(2), 27(in Chinese).
闫小顺, 黄小平, 周心桃. 舰船科学技术, 2016, 38(2), 27.
13 Bach J, Möller J J, Göken M, et al. International Journal of Fatigue, 2016, 93, 281.
14 Mughrabi H. Metallurgical & Materials Transactions B, 2009, 40, 1257.
15 Wang C, Wagner D, Wang Q, et al. Fatigue & Fracture of Engineering Materials & Structures, 2015, 38, 1324.
16 Gkatzogiannis S, Weinert J, Engelhardt I, et al. International Journal of Fatigue, 2019, 126, 90.
17 Zhang T, Liu J, Huang F, et al. Journal of Chinese Society for Corrosion and Protection, 2021, 41(2), 226(in Chinese).
张腾, 刘静, 黄峰, 等. 中国腐蚀与防护学报, 2021, 41(2), 226.
18 Ma J, Zhang B, Wang J, et al. Corrosion Science, 2010, 52, 2867.
19 Sadananda K, Vasudevan A K. International Journal of Fatigue, 2020, 134, 105471.
20 Ebara R. Procedia Engineering, 2010, 2, 1297.
21 Ebara R. Engineering Failure Analysis, 2004, 13, 516.
22 Ishibashi Y, Kayamori Y. Materials Science Forum, 2019, 4559, 1716.
23 Ahn S H, Frederick V, Lawrence J, et al. Fatigue & Fracture of Engineering Materials & Structures, 1992, 15, 625.
24 Sun X M, Liu Y G, Ma J. Physical Testing and Chemical Analysis(Part A:Physical Testing), 2010, 46(8), 475(in Chinese).
孙先明, 刘彦国, 马锦. 理化检验(物理分册), 2010, 46(8), 475.
25 Zhou X Y, Ke W. Acta Metallurgica Sinica, 1992(8), 72(in Chinese).
周向阳, 柯伟. 金属学报, 1992(8), 72.
26 Kong Z Y, Xu S H, Liu D F. Journal of North China University of Water Resources and Electric Power), 2010, 31(6), 46(in Chinese).
孔正义, 徐善华, 刘德峰. 华北水利水电大学学报(自然科学版), 2010, 31(6), 46.
27 Liang X J, Ji H X. Hot Working Technology, 2020, 49(14), 55(in Chinese).
梁秀娟, 嵇海旭. 热加工工艺, 2020, 49(14), 55.
28 Palin-Luc T, Pérez-Mora R, Bathias C, et al. Engineering Fracture Mechanics, 2010, 77, 1953.
29 Zhao W M, Wang Y X, Zhang T M, et al. Corrosion Science, 2012, 57, 99.
30 Hong Y S, Liu X L, Lei Z Q, et al. International Journal of Fatigue, 2016, 89, 108.
31 Schönbauer B M, Stanzl-Tschegg E, Perlega A, et al. Engineering Fracture Mechanics, 2015, 147, 158.
32 Tong K, Zeng Y P, Han X L, et al. Advanced Materials Research, 2011, 1333, 1096.
33 Ai F F, Xu X L, Chen Y Q, et al. Corrosion & Protection, 2012, 33(5), 422(in Chinese).
艾芳芳, 徐小连, 陈义庆, 等. 腐蚀与防护, 2012, 33(5), 422.
34 Bi Z Y, Jing X T, He S L, et al. Hot Working Technology, 2010, 39(22), 19(in Chinese).
毕宗岳, 井晓天, 何石磊, 等. 热加工工艺, 2010, 39(22), 19.
35 Spriestersbach D, Grad P, Kerscher E. Procedia Engineering, 2014, 74, 84.
36 Gu C, Bao Y P, Gan P, et al. International Journal of Minerals, Metallurgy, and Materials, 2018, 25, 623.
37 Hong Y S, Zhao A G, Qian G A, et al. Metallurgical and Materials Transactions A, 2012, 43, 2753.
38 Lu L T, Li W, Zhang J W, et al. Acta Metallurgica Sinica, 2009, 45(1), 73(in Chinese).
鲁连涛, 李伟, 张继旺, 等. 金属学报, 2009, 45(1), 73.
39 Gu J, Yang M S, Lu D H, et al. Journal of Materials Engineering, 2019, 47(7), 134(in Chinese).
郭军, 杨卯生, 卢德宏, 等. 材料工程, 2019, 47(7), 134.
40 Meurling F, Melander A, Tidesten M, et al. International Journal of Fatigue, 2001, 23, 215.
41 Fajdiga G, Sraml M. Engineering Fracture Mechanics, 2009, 76, 1320.
42 Wu X Q, Katada Y. Corrosion Science, 2004, 47, 1415.
43 Wu X, Katada Y. Materials and Corrosion, 2005, 56, 305.
44 Xu S, Han E H, Ke W, et al. Corrosion & Protection, 2010, 31(11), 825(in Chinese).
徐松, 韩恩厚, 柯伟, 等. 腐蚀与防护, 2010, 31(11), 825.
45 Xu L P, Cao X J, Li J K, et al. Rare Metal Materials and Engineering, 2017(1), 83(in Chinese).
许罗鹏, 曹小建, 李久楷, 等. 稀有金属材料与工程, 2017(1), 83.
46 Wang J Q, Li J, Wang Z F, et al. Acta Metallurgica Sinica, 1995, 31(15), 103(in Chinese).
王俭秋, 李劲, 王政富, 等. 金属学报, 1995, 31(15), 103.
47 Wang C, Liu Y J, Nikitin A, et al. Fatigue & Fracture of Engineering Materials & Structures, 2019, 42, 2183.
48 Jia K N, Wang H D, Jiang Q Y. Hot Working Technology, 2009(19), 25(in Chinese).
贾坤宁, 王海东, 姜秋月. 热加工工艺, 2009(19), 25.
49 Sangid M D. International Journal of Fatigue, 2013, 57, 58
50 Sadananda K, Vasudevan A K. Corrosion Reviews, 2015, 33, 335.
51 Liu Y G, Ma J, Sun X M. Mechanics in Engineering, 2010(32), 49(in Chinese).
刘彦国, 马进, 孙先明. 力学与实践, 2010(32), 49.
52 Zhang Z Y, Tan J B, Wu X Q, et al. Corrosion Science, 2019, 146, 80.
53 Sun X G, Wang Z H, Xu X X, et al. Journal of Chinese Society for Corrosion and Protection, 2021(4), 501(in Chinese).
孙晓光, 王子晗, 徐学旭, 等. 中国腐蚀与防护学报, 2021(4), 501.
54 Co N E C, Burns J T. International Journal of Fatigue, 2017, 103, 234.
55 Tan J B, Wu X Q, Han E H, et al. Journal of Nuclear Materials, 2017, 489, 33.
56 Wu H C, Yang B, Shi Y Z, et al. Journal of Materials Science & Technology, 2015, 31(11), 1144.
57 Luo S J, Liu M, Lin X Z. Materials and Corrosion, 2019, 70, 688.
58 Wan L, Geng W T, Ishii A, et al. International Journal of Plasticity, 2019, 112, 206.
59 Vosikovsky O. Journal of Engineering Materials and Technology, 1975, 97, 298.
60 Thorpe T W, Scott P M, Rance A, et al. International Journal of Fatigue, 1983, 5, 123.
61 Mayén J, Abúndez A, Pereyra I, et al. Engineering Fracture Mechanics, 2017, 177, 203.
62 Zhao T L, Liu Z Y, Du C W, et al. Materials Science & Engineering A, 2017, 708, 181.
63 Hu P, Meng Q C, Hu W P, et al. Corrosion Science, 2016, 113, 78.
64 Wang C Q, Xiong J J, Shenoi R A, et al. International Journal of Fatigue, 2016, 83, 280.
65 Chen J, Diao B, He J J, et al. International Journal of Fatigue, 2018, 110, 153.
66 Han Y D, Li Z, Xu L Y, et al. Transactions of the China Welding Institution, 2018, 39, 13(in Chinese).
韩永典, 李展, 徐连勇, 等. 焊接学报, 2018, 39, 13.
67 Kang D H, Lee J K, Kim T W. Engineering Failure Analysis, 2010, 18, 557.
68 Kang D H, Lee J K, Kim T W. Procedia Engineering, 2011, 10, 1170.
69 Dai J R, Huang Y, Wu Z M. Corrosion Science and Protection Technology, 2016, 28(2), 109(in Chinese).
代娇荣, 黄一, 吴智敏. 腐蚀科学与防护技术, 2016, 28(2), 109.
70 Zhao T L, Liu Z Y, Du C W, et al. International Journal of Fatigue, 2018, 110, 105.
71 Chlistovsky R M, Heffernan P J, Duquesnay D L. International Journal of Fatigue, 2007, 29, 1941.
72 Huang Y, Wu Z M, Shangguan Y J. Low Temperature Architecture Technology, 2015, 37(9), 3(in Chinese).
黄一, 吴智敏, 上官祎瑾. 低温建筑技术, 2015, 37(9), 3.
73 Ke W, Li J. Corrosion Science and Protection Technology, 1999, 11(2), 3(in Chinese).
柯伟, 李劲. 腐蚀科学与防护技术, 1999, 11(2), 3.
74 Han G W, Song Y J. Journal of Chinese Society for Corrosion and Protection, 1991, 11(4), 297(in Chinese).
韩光炜, 宋余九. 中国腐蚀与防护学报, 1991, 11(4), 297.
75 Zhao W M, Xin R F, He Z R, et al. Corrosion Science, 2012, 63, 387.
76 Pfennig A, Wiegand R, Wolf M, et al. Corrosion Science, 2013, 68, 1343.
77 Han E H, Han Y M, Zheng Y L, et al. Acta Metallurgica Sinica, 1993, 29(5), 31(in Chinese).
韩恩厚, 韩玉梅, 郑宇礼, 等. 金属学报, 1993, 29(5), 31.
78 Wang J, Li X Y, Zhang Y L. Journal of Mechanical Strength, 2009, 31(6), 972(in Chinese).
王晶, 李晓阳, 张亦良. 机械强度, 2009, 31(6), 972.
79 Huang F, Li X G, Liu J, et al. Journal of Materials Science, 2011, 46, 715.
80 Shipilov S A. Journal of Chinese Society for Corrosion and Protection, 2004, 24(6), 2(in Chinese).
Shipilov S A. 中国腐蚀与防护学报, 2004, 24(6), 2.
81 Huang X G, Xu J Q. Acta Mechanica Solida Sinica, 2013, 34(1), 7(in Chinese).
黄小光, 许金泉. 固体力学学报, 2013, 34(1), 7.
82 Sriraman M R, Pidaparti R M. Journal of Materials Engineering and Performance, 2010, 19, 7.
83 Wang S Q, Zhang D K, Hu N N, et al. Materials, 2016, 9, 750.
84 Wang H, Liu X, Ni G X. Hot Working Technology, 2019, 48(10), 79(in Chinese).
王恒, 刘肖, 倪广县. 热加工工艺, 2019, 48(10), 79.
85 Bernd M, Schönbauer, Stefanie E, et al. International Journal of Fatigue, 2014, 65, 33.
86 Li M X, Wang R, Li P L, et al. China Petroleum Machinery, 2002(7), 1(in Chinese).
李明星, 王荣, 李鹏亮, 等. 石油机械, 2002(7), 1.
87 Jesus D, Abílio M P, Matos R, et al. Journal of Constructional Steel Research, 2012, 79, 140.
88 Li S M, Wu L F, Liu J H, et al. Journal of Aeronautical Materials, 2014, 34(3), 74(in Chinese).
李松梅, 吴凌飞, 刘建华, 等. 航空材料学报, 2014, 34(3), 74.
89 Guo Z Z, Ma Y F, Wang L, et al. Journal of Materials in Civil Engineering, 2020, 32, 04020115.
90 Zhang D Y, Li Z. Total Corrosion Control, 2019(3), 100(in Chinese).
张丹阳, 李臻. 全面腐蚀控制, 2019(3), 100.
91 Ma Y H, Zhang Z, Guo M Y, et al. Materials for Mechanical Engineering, 2021, 45(4), 65(in Chinese).
马颖涵, 张振, 郭孟雨, 等. 机械工程材料, 2021, 45(4), 65.
92 Knop M, Heath J, Sterjovski Z, et al. Procedia Engineering, 2010, 2, 1243.
93 Li M X, Yan F X, Lu M X. Journal of Mechanical Strength, 2004, 26(3), 313(in Chinese).
李明星, 闫凤霞, 路民旭. 机械强度, 2004, 26(3), 313.
94 Zhang G J, Pan Z G, Duan Z J, et al. Corrosion & Protection in Petrochemical Industry, 2001, 18(1), 53(in Chinese).
张国军, 潘治国, 段占军, 等. 石油化工腐蚀与防护, 2001, 18(1), 53.
95 Fassina P, Brunella F, Lazzari L, et al. Procedia Engineering, 2011, 10, 3345.
96 Adedipe O, Brennan F, Kolios A. Marine Structures, 2015, 42, 115.
97 Dhinakaran S, Raghu V, Prakash. Materials Science & Engineering A, 2014, 609, 204.
98 May M E, Saintier N, Devos O, et al. Corrosion Science, 2018, 133, 397.
99 Zhao J P, Zhou C Y, Yu X C, et al. Journal of Materials Engineering, 1999(6), 3(in Chinese).
赵建平, 周昌玉, 於孝春, 等. 材料工程, 1999(6), 3.
100 Li J, Wang Z F, Ke W. Acta Metallurgica Sinica, 1993(6), 82(in Chinese).
李劲, 王政富, 柯伟. 金属学报, 1993(6), 82.
101 Lu M X, Liu X K, Wang J J, et al. Acta Aeronautica ET Astronautica Sinica, 1993(1), 49(in Chinese).
路民旭, 刘晓坤, 王建军, 等. 航空学报, 1993(1), 49.
102 Liang Y M, Huang Y, Wu Z M. Corrosion & Protection, 2016, 37(4), 289(in Chinese).
梁永梅, 黄一, 吴智敏. 腐蚀与防护, 2016, 37(4), 289.
103 Igwemezie V, Mehmanparast A. International Journal of Fatigue, 2020, 134, 105484.
104 Fan Y, Su H Z, Chen K, et al. Corrosion & Protection, 2020, 41(7), 67(in Chinese).
范镒, 苏豪展, 陈凯, 等. 腐蚀与防护, 2020, 41(7), 67.
105 Igwemezie V, Dirisu P, Mehmanparast A. Materials Science & Engineering A, 2019, 754, 750.
106 Lorenzi S, Testa C, Cabrini M, et al. Key Engineering Materials, 2020, 4874, 294.
107 Zhong Y, Xiao F R, Shan Y Y, et al. Acta Metallurgica Sinica, 2005(5), 523(in Chinese).
钟勇, 肖福仁, 单以银, 等. 金属学报, 2005(5), 523.
108 Bach J, Möller J J, Göken M, et al. International Journal of Fatigue, 2016, 93, 281.
109 Chen D, Wu S Z, Chen H J, et al. Hot Working Technology, 2018, 47(16), 61(in Chinese).
陈丹, 吴素珍, 陈海军, 等. 热加工工艺, 2018, 47(16), 61.
110 Korda A A, Mutoh Y, Miyashita Y, et al. Scripta Materialia, 2006, 54, 1835.
111 Klapper H S, Menendez C, Jesse S. Corrosion, 2020, 76, 398.
112 Engler C T, Klapper H S, Oechsner M. Metals-Open Access Metallurgy Journal, 2021, 11, 117.
113 Wu Q G, Chen X D, Fan Z C, et al. Engineering Failure Analysis, 2017, 79, 422.
114 Wang H, Su B Y, Hua G R, et al. Hot Working Technology, 2016, 45(16), 48(in Chinese).
王恒, 苏波泳, 花国然, 等. 热加工工艺, 2016, 45(16), 48.
115 Li Q, Ye C, Zhou C Y, et al. Journal of Materials Engineering, 2000(2), 27(in Chinese).
李强, 业成, 周昌玉, 等. 材料工程, 2000(2), 27.
116 Chen X, Yang L, Dai H L, S et al. Engineering Failure Analysis, 2020, 113, 104556
117 Liu Q G, Guo Y S, Shen S M. Hebei Journal of Industrial Science & Technology, 2011, 28(5), 285(in Chinese).
刘庆刚, 郭彦书, 沈士明. 河北工业科技, 2011, 28(5), 285.
118 Wang L M, Zhong Y B, Zhu X M, et al. Journal of Chinese Society for Corrosion and Protection, 2005, 25(3), 167(in Chinese).
王雷明, 钟义兵, 朱小明, 等. 中国腐蚀与防护学报, 2005, 25(3), 167.
119 Perkins K M, Bache M R. International Journal of Fatigue, 2005, 27, 1499.
120 Xiao J, Xiao T, Zheng Y Q, et al. Journal of Nuclear Materials, 2020, 537, 152259.
121 Zhu Y F, Li Z L, Fan W L, et al. Journal of Building Structures, 2020, 41(8), 105(in Chinese).
祖云飞, 李正良, 范文亮, 等. 建筑结构学报, 2020, 41(8), 105.
122 Genel K, Demirkol M, Ürgen M. International Journal of Fatigue, 2002, 24, 537.
123 Wang J Q, Li J, Ke W. Corrosion Science and Protection Technology, 1997, 9(4), 30(in Chinese).
王俭秋, 李劲, 柯伟. 腐蚀科学与防护技术, 1997, 9(4), 30.
124 Zhang H X, Wang W W, Deng C L. Equipment Environmental Engineering, 2011, 8(2), 16(in Chinese).
张慧霞, 王伟伟, 邓春龙. 装备环境工程, 2011, 8(2), 16.
125 Jia L N, Jiao D W, Shangguan Y J, et al. Acoustics and Electronics Engineering, 2019(2), 46(in Chinese).
贾理男, 焦达文, 上官祎瑾, 等. 声学与电子工程, 2019(2), 46.
126 Chen Z R, Ma Q H. Research and Exploration in Laboratory, 2007(10), 276(in Chinese).
陈卓人, 马巧红. 实验室研究与探索, 2007(10), 276.