FRP约束混凝土关键问题综述

doi:10.11896/cldb.20110045

Abstract
Figure/Table
References
Related Citation (9)

Download:

Full Text ( PDF ) (3534KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, we performed an international literature review of fiber reinforced polymer (FRP) concrete. 29 peak stress models and 19 peak strain models of FRP-confined concrete were selected, and the accuracy of the models was verified according to the relevant measured data from peer-reviewed data. The results show that the prediction accuracy of these models for the strongly-confined concrete is inadequate. Therefore, we offer a relatively simple peak stress and strain model with better accuracy by piecewise fitting. Based on the literature, the two factors that affect the radial constraint force are elastic modulus of FRP and rupture strain. We suggest that :(1) compared with low elastic modulus FRP, high elastic modulus FRP can delay the damage of concrete and improve the mechanical properties of concrete in the core zone, (2) construction disturbance, stress difference and material heterogeneity decrease FRP rupture strain, (3) for carbon fiber reinforced polymer (CFRP), glass fiber reinforced polymer (GFRP), and aramid fiber reinforced polymer (AFRP), the effective coefficient of rupture strains are 0.723, 0.774, and 0.774, respectively. The purpose of this paper is to provide reference for the extended application of FRP-confined concrete.

Key words： fiber reinforced polymer peak stress model peak strain model rupture stain constitutive iteration

Published: 10 January 2023 Online: 2023-01-31

CLC number:

TM912

Fund:National Natural Science Foundation of China (51968058), Inner Mongolia Autonomous Region Talent Development Found, Program for Young Talents of Science Technology in University of Inner Mongolia Autonomous Region (NJYT-18-A06), the Natural Science Foundation of Inner Mongolia Autonomous Region(2021MS05012), and the Open Fund Project of the Institute of Building Science of Inner Mongolia University of Science and Technology(JYSJJ-2021M16).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIANG Zehui
	WANG Jun
	NIU Jiangang
	ZHOU Jie

Cite this article:

XIANG Zehui,WANG Jun,NIU Jiangang, et al. Review of Key Issues in FRP-confined Concrete[J]. Materials Reports, 2023, 37(1): 20110045-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20110045 OR http://www.mater-rep.com/EN/Y2023/V37/I1/20110045

1 Richart F E, Brandtzæg A, Brown R L. A study of the failure of concrete under combined compressive stresses. Ph.D.Thesis, University of Illinois at Urbana Champaign, College of Engineering. Engineering Experiment Station, America, 1928.
2 Mander J B, Priestley M J N, Park R, et al. Journal of Structural Engineering, 1988, 114(8), 1804.
3 Yu T, Lin G, Zhang S S, et al. Composite Structures, 2016, 154(154), 493.
4 Zhang B, Feng G S, Wei W, et al. Journal of Building Structures, 2019, 40(S1), 185(in Chinese).
张冰, 冯贵森, 魏威, 等. 建筑结构学报, 2019, 40(S1), 185.
5 Xiang Z H, Niu J G, Wang M Y, et al. Journal of Building Structures, 2020, 41(S1), 154(in Chinese).
相泽辉, 牛建刚, 王梦雨, 等. 建筑结构学报, 2020, 41(S1), 154.
6 Bazli M, Bazli L, Rahmani R, et al. Journal of Composites and Compounds, 2020, 2(4), 155.
7 Hu L, Feng P, Lin H, et al. Composite Structures, 2020, 257, 113126.
8 Zhou Y, Liu X, Xing F, et al. Construction and Building Materials, 2016, 119, 1.
9 Zhang T, Niu D, Rong C. Construction and Building Materials, 2019, 218, 206.
10 Lam L, Teng J G. Construction and Building Materials, 2003, 17(6-7), 471.
11 Jiang T, Teng J G. Engineering Structures, 2007, 29(11), 2968.
12 Amir M, Aashish S, Giorgio M. Journal of composites for construction, 2001, 5(1), 62.
13 Karbhari V M. Journal of Thermoplastic Composite Materials, 1993, 6(2), 92.
14 Mirmiran A. Analytical and experimental investigation of reinforced concrete columns encased in fibre glass tubular jackets and use of fiber jacket for pile splicing WPI 0510700, 1997.
15 Karbhari V M, Gao Y. Journal of Materials in Civil Engineering, 1997, 9(4), 185.
16 Miyauchi K, Nishibayashi S, Inoue S. In: 3rd Int. Symp. of Non-metallic Reinforcement for Concrete Structures. Japan, 1997, pp.217.
17 Michel S, Amir M, Mohsen S. Journal of Structural Engineering, 1998, 124(9), 1025.
18 Miyauchi K, Inoue S, Kuroda T, et al. Proceedings of the Japan Concrete Institute, 1999, 21(3), 1453.
19 Mohamed S, Houssam T, Zongjin L. Materials Journal, 1999, 96(4), 500.
20 Toutanji H. Materials Journal, 1999, 96(3), 397.
21 Salim R, Murat S. Journal of Structural Engineering, 1999, 125(3), 281.
22 Lam L, Teng J G. Journal of Structural Engineering, 2002, 128(5), 612.
23 Ilki A, Kumbasar N, Koc V. In: Proc. ASCE 15th Engineering Mecha-nics Conference. New York, 2002.
24 Domingo A M, Chris P P. Journal of Composites for Construction, 2002, 6(4), 224.
25 Shehata I A, Carneiro L A, Shehata L D, et al. Materials and Structures, 2002, 35(1), 50.
26 Ilki A, Kumbasar N, Koc V, et al. Structural Engineering and Mechanics, 2004, 18(2), 167.
27 Bisby L A, Dent A J, Green M F. ACI Structural Journal, 2005, 102(1), 62.
28 Matthys S, Toutanji H, Audenaert K, et al. ACI Structural Journal, 2005, 102(2), 258.
29 Al-tersawy S H, Hodhod O A, Hefnawy A A. In: Proceedings, Eighth International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Patras, Greece, 2007, pp. 122.
30 Ciupala M A, Pilakoutas K, Mortazavi A A, et al. A. In: Proc., 8th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Concrete Structures. Patras, Greece, 2007, pp. 252.
31 Vintzileou E, Panagiotidou E. Construction and Building Materials, 2008, 22(5), 841.
32 Kumutha R, Vaidyanathan R, Palanichamy M S, et al. Cement & Concrete Composites, 2007, 29(8), 609.
33 Wu Y, Wang L. Journal of Structural Engineering-Asce, 2009, 135(3), 253.
34 Benzaid R, Mesbah H A, Chikh N, et al. Journal of Reinforced Plastics and Composites, 2010, 29(16), 2469.
35 Wu Y, Zhou Y. Journal of Composites for Construction, 2010, 14(2), 175.
36 Fardis M N, Khalili H. Magazine of Concrete Research, 1982, 34(121), 191.
37 De Lorenzis L, Tepfers R. Journal of Composites for Construction, 2003, 7(3), 219-23.
38 Campione G, Miraglia N. Cement & Concrete Composites, 2003, 25(1), 31.
39 Candappa D C, Sanjayan J G, Setunge S, et al. Journal of Materials in Civil Engineering, 2001, 13(3), 209.
40 Hammons M I, Neeley B D. Transportation Research Record, 1993, 1382(2), 73.
41 Hurlbut B J. Experimental and computational investigation of strain-softening in concrete. Ph. D. Thesis. University of Colorado, USA, 1985.
42 Imran I. Applications of non-associated plasticity in modeling the mecha-nical response of concrete. Ph. D. Thesis, Department of Civil Enginee-ring, University of Toronto, Canada, 1994.
43 Imran I, Pantazopoulou S J. ACI Materials Journal, 1996, 93(6), 589.
44 Ansari F, Li Q. ACI Materials Journal, 1998, 95(6), 747.
45 Attard M M, Setunge S. Materials Journal, 1996, 93(5), 432.
46 Bellotti R, Rossi P. Materials and Structures, 1991, 24(1), 45.
47 Jamet P, Millard A, Nahas G. In: CEA Centre d’Etudes Nucleaires de Saclay. Toulouse, 1984, pp. 133.
48 Kotsovos M D, Newman J B. Journal of Engineering Mechanics-asce, 1978, 104(4), 845.
49 Newman J B. Chapter, 1979, 5, 151.
50 Lahlou K, Aitcin P, Chaallal O, et al. Cement & Concrete Composites, 1992, 14(3), 185.
51 Lu X, Hsu C T. Journal of Materials in Civil Engineering, 2007, 19(3), 261.
52 Rutland C A, Wang M L. Cement & Concrete Composites, 1997, 19(2), 149.
53 Setunge S, Attard M M, Darvall P, et al. ACI Structural Journal, 1993, 90(6), 632.
54 Sfer D, Carol I, Gettu R, et al. Journal of Engineering Mechanics-ASCE, 2002, 128(2), 156.
55 Smith S S, Willam K J, Gerstle K H, et al. ACI Materials Journal, 1989, 86(5), 491.
56 Xie J, Elwi A E, MacGregor J G. Materials Journal, 1995, 92(2), 135.
57 Watanabe K, Nakamura H, Honda Y, et al. In: Non-Metallic(FRP) Reinforcement for Concrete Structures. Japan Concrete Institute. Procee-dings of the Third International Symposium. Japan, 1997, pp. 233.
58 Matthys S, Taerwe L, Audenaert K. Special Publication, 1999, 188, 217.
59 Xiao Y, Wu H. Journal of Materials in Civil Engineering, 2000, 12(2), 139.
60 De Lorenzis L, Micelli F, La Tegola A. In:Advanced Polymer Composites for Structural Applications in Construction: Proceedings of the First International Conference. 2002, pp. 231.
61 Howie I, Karbhari V M. In: Infrastructure: New Materials and Methods of Repair. ASCE. California, 1994, pp.199.
62 Harries K A, Kestner J, Pessiki S, et al. In: Second International Conference on Composites in Infrastructure National Science Foundation. Tucson, Arizona, 1998, pp. 411.
63 Matthys S, Taerwe L, Audenaert K. Special Publication, 1999, 188, 217.
64 Sachin K, Roberto A L, Rakesh K G. Materials Journal, 2000, 97(6), 703.
65 Rochette P, Labossiere P. Journal of Composites for Construction, 2000, 4(3), 129.
66 Zhang S, Ye L, Mai Y, et al. Applied Composite Materials, 2000, 7(2), 125.
67 Owen L M. Stress-strain behavior of concrete confined by carbon fiber jacketing. Ph. D. Thesis. University of Washington, USA, 1998.
68 Song X, Gu X, Li Y, et al. MechanicalJournal of Composites for Construction, 2013, 17(3), 336.
69 Vincent T, Ozbakkaloglu T. Composites Part B-Engineering, 2013, 50, 413.
70 Valdmanis V, De L L, Rousakis T C, et al. Structural Concrete, 2007, 8(4), 187.
71 Almusallam T H. Composites Part B-Engineering, 2007, 38(5), 629.
72 Cui C, Sheikh S A. Journal of Composites for Construction, 2010, 14(5), 553.
73 Lam L, Teng J G. Journal of Composites for Construction, 2004, 8(6), 539.
74 Silva M A, Rodrigues C C. Journal of Materials in Civil Engineering, 2006, 18(3), 334.
75 Ozbakkaloglu T, Akin E. Journal of Composites for Construction, 2012, 16(4), 451.
76 Vincent T, Ozbakkaloglu T. Construction and Building Materials, 2013, 47, 814.
77 Bullo S. In: Proceedings of the International Conference Composites in Construction. Cosenza, Italy, 2003, pp. 16.
78 Rousakis T, Tepfers R. Research Rep, 2001, 44, 1.
79 Pessiki S, Harries K A, Kestner J T, et al. Journal of Composites for Construction, 2001, 5(4), 237.
80 Chen J F, Li S Q, Bisby L, et al. Composites Part B-Engineering, 2011, 42(4), 962.
81 Smith S T, Kim S J, Zhang H, et al. Journal of Composites for Construction, 2010, 14(5), 573.
82 Hine P J, Duckett R A, Kaddour A S, et al. Composites Part A-Applied Science and Manufacturing, 2005, 36(2), 279.
83 Zinoviev P A, Tsvetkov S V. Composites Science and Technology, 1998, 58(1), 31.
84 Zinoviev P A, Tsvetkov S V, Kulish G G, et al. Composites Science and Technology, 2001, 61(8), 1151.