铁素体不锈钢焊缝晶粒细化技术的研究现状

doi:10.11896/cldb.21040102

Abstract
Figure/Table
References
Related Citation (2)

Download:

Full Text ( PDF ) (12644KB)
Export: BibTeX | EndNote (RIS)

Abstract Ferritic stainless steel has the advantages of no Ni, good thermal conductivity, low linear expansion coefficient, low cost, etc., and has better stress corrosion resistance than austenitic stainless steel in a chloride ion environment. It is widely used in automobiles, marine applications and petrochemical. However, during the welding process, the weld zone and the heat-affected zone are prone to have coarse grains, which lead to a decrease in the toughness of the joint, especially the autogenous welding of thick plates.
Through collecting, classifying and analyzing the research data of ferritic stainless steel weld grain refinement at home and abroad, this paper summarizes the methods of ferritic stainless steel weld grain refinement, such as controlling welding parameters, preheating and increasing cooling rate, adjust the alloy elements of the molten pool, pulse welding, electromagnetic stirring and ultrasonic vibration and other methods. Based on the existing literature, three different mechanisms, including heterogeneous nucleation, promotion of grain separation and dendrite fusion, are used to explain the grain refinement phenomenon of weld microstructure. Finally, the method of grain refinement for ferritic stainless steel welds is prospected, and the method of applying an external energy field has a certain influence on the flow of the molten pool metal. In particular, the study of the grain growth behavior of the weld structure under multi-physical fields will provide new ideas for improving the performance of high penetration self-fusion welding joints. In the future, it will be the main trend to develop the grain refining equipment with strong practical application and develop the grain refining technology of ferrite stainless steel weld under the large penetration depth of autogenous welding technology.

Key words： ferritic stainless steel grain refining method weld microstructure multi-physics

Published: 10 November 2022 Online: 2022-11-03

CLC number:

TG442

Fund:Shenyang Collaborative Innovation Center Project for Multiple Energy Fields Composite Processing of Special Materials(JG210027) and Shenyang Key Technology Special Project of “The Open Competition Mechanism to Select the Best Solution”(2022210101000827, 2022-0-43-048).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DONG Zhihai
	LI Yiwen
	ALEKSANDR Babkin
	CHANG Yunlong

Cite this article:

DONG Zhihai,LI Yiwen,ALEKSANDR Babkin, et al. Research Status of Ferritic Stainless Steel Weld Grain Refinement Technology[J]. Materials Reports, 2022, 36(21): 21040102-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21040102 OR http://www.mater-rep.com/EN/Y2022/V36/I21/21040102

1 Mondal M, Das H, Ahn E Y, et al. Metals and Meterials International, 2017, 23, 948.
2 Liu H L, Ma M Y, Liu L L, et al. Journal of Iron and Steel Research International, 2019, 26, 425.
3 Wu W Y, Hu S S, Shen J Q, et al. Journal of Materials Engineering and Performance, 2015, 24, 1505.
4 Okayasu M, Shigeoka T. Journal of Materials Engineering and Perfor-mance, 2019, 28, 6771.
5 Scalise T C, Oliveira M C L D, Sayeg I J, et al. Journal of Materials Engineering and Performance, 2014, 23, 2164.
6 Huang X Z, Wang D, Yang Y T. Journal of Iron and Steel Research International, 2015, 22, 1062.
7 Han K, Hong S, Lee C. Materials Science and Engineering A, 2012, 546, 97.
8 Sello M P, Stumpf W E. Materials Science and Engineering A, 2011, 528(3), 1840.
9 Lakshminarayanan A K, Balasubramanian V. Journal of Materials Engineering and Performance, 2012, 21(4), 530.
10 Lakshminarayanan A K, Balasubramanian V. Journal of Iron and Steel Research, 2012, 19(1), 75.
11 Silva C C, Farias J P, Hélio C M, et al. Materials Characterization, 2008, 59(5), 528.
12 Venkatesan M V, Murugan N, Sam S, et al. Transactions of the Indian Institute of Metals, 2013, 67(3), 375.
13 Akita M, Uematsu Y, Kakiuchi T, et al. Welding International, 2018, 32(6), 427.
14 He S R, Wang W X, Zhang T T, et al. Mechanical Engineering and Automation, 2014(5), 97 (in Chinese).
贺舒榕, 王文先, 张婷婷, 等. 机械工程与自动化, 2014(5), 97 .
15 Liu S H, Wang Y J, Quan W W. Electric Welding machine, 2009, 39(1), 30 (in Chinese).
刘顺洪, 王玉姣, 权雯雯. 电焊机, 2009, 39(1), 30.
16 Amuda M O H, Mridha S. Advanced Materials Research, 2011, 264, 390.
17 Liu L L. Super ferritic stainless steel laser welding research, Master’s Thesis, Tianjin University, China, 2014 (in Chinese).
刘腊腊. 超级铁素体不锈钢激光焊接研究. 硕士学位论文, 天津大学, 2014.
18 Köse C, Topal C. Materials Research Express, 2019, 6(6), 066517.
19 Lakshminarayanan A K, Balasubramanian V. Materials & Design, 2010, 31(10), 4592.
20 Lakshminarayanan A K, Balasubramanian V. Experimental Techniques, 2013, 37(5), 59.
21 Han J, Li H, Zhu Z, et al. Materials & Design, 2014, 63(11), 238.
22 Tang W S, Yang X Q, Li S L, et al. Transactions of the China Welding Institution, 2019, 40(6), 87 (in Chinese).
唐文珅, 杨新岐, 李胜利, 等. 焊接学报, 2019, 40(6), 87.
23 Lakshminarayanan A K, Balasubramanian V. Steel Research International, 2010, 81(11), 1023.
24 Srinivasan B P, Kumar S M P. Corrosion Engineering, Science and Technology, 2009, 44(2), 137.
25 Kim K H, Bang H S, Ro C S, et al. International Journal of Precision Engineering and Manufacturing-Green Technology, 2017, 4(4), 393.
26 Lakshminarayanan A K, Shanmugam K, Balasubramanian V. Journal of Iron and Steel Research(International), 2009, 16(1), 62.
27 Prakaash V G V, Vignesh A, Lakshminarayanan A K, et al. Applied Mechanics & Materials, 2015, 787, 401.
28 Yang W P, Yan Z F, Wang W X, et al. Transactions of Materials and Heat Treatment, 2012, 33(10), 96 (in Chinese).
杨文平, 闫志峰, 王文先, 等. 材料热处理学报, 2012, 33(10), 96.
29 Zheng Y, Wang Y, Li H, et al. The International Journal of Advanced Manufacturing Technology, 2016, 87, 3315.
30 Amuda M O H, Mridha S. Materials & Design, 2013, 47(5), 365.
31 Amuda M O H, Mridha S. Materials & Design, 2012, 35(3), 609.
32 Mallaiah G, Kumar A, Reddy P R, et al. Materials & Design, 2012, 36(4), 443.
33 Mallaiah G, Reddy P R, Kumar A. Procedia Materials Science, 2014, 6, 1740.
34 Gurram M, Adepu K, Pinninti R R, et al. Journal of Materials Research and Technology, 2013, 2(3), 238.
35 Park T J, Kong J P, Uhm S H, et al. Journal of Materials Processing Technology, 2011, 211, 415.
36 Kong J P, Park T J, Kim J K, et al. Materials & Design, 2011, 32(2), 917.
37 Amuda M O H, Mridha S. Advanced Materials Research, 2012, 445, 717.
38 Reddy G M, Mohandas T. Journal of Materials Science Letters, 2001, 20(8), 721.
21040102-939 Zhou J B, Chen J Q, Wang H Y, et al. Welding & Joining, 2009(3), 57 (in Chinese).
周宝金, 陈俊强, 王慧源, 等. 焊接, 2009(3), 57.
40 Mukherjee M, Dutta A, Kanjila P, et al. ISIJ International, 2015, 55(7), 1439.
41 Hu S S, Pang J, Shen J Q, et al. Transactions of Tianjin University, 2016, 22, 451.
42 Zhang H, Hu S S, Shen J Q, et al. International Journal of Advanced Manufacturing Technology, 2015, 80(9-12), 1975.
43 Vishnuvaradhan K, Vignesh P V, Prabhu R. International Journal of Machine and Construction Engineering, 2017, 4(2), 2394.
44 Liu X G, Guan Z Q, Zhang H X, et al. Hot Working Technology, 2019, 48(15), 1 (in Chinese).
刘晓光, 关子奇, 张洪旭, 等. 热加工工艺, 2019, 48(15), 1.
45 Wu H, Chang Y L, Lu L, et al. The International Journal of Advanced Manufacturing Technology, 2017, 91, 4263.
46 Villafuerte J C, Kerr H W. Weld Journal, 1990, 69(1), 1.
47 Reddy G, Meshram, Suresh. Indian Weld Journal, 2006, 39, 35.
48 Ding M, Wang Y C. Metals and Materials International, 2016, 22(1), 94.
49 Zhang C L, Wu M S. Welding & Joining, 2003(8), 8 (in Chinese).
张春雷, 吴敏生.焊接, 2003(8), 8.
50 Wu M S, He L B, Li L M, et al. Transactions of the China Welding Institution, 2005, 26(6), 40 (in Chinese).
吴敏生, 何龙标, 李路明, 等.焊接学报, 2005, 26(6), 40.
51 Wu M S, Zhang Y J, Li L M, et al. Journal of Tsinghua University(Science and Technology), 2006 (2), 161 (in Chinese).
吴敏生,张雁军,李路明,等.清华大学报(自然科学版), 2006(2), 61.
52 Watanabe T, Shiroki M, Yanagisawa A, et al. Journal of Materials Processing Technology, 2010, 210(12), 1646.
53 Leo P, Renna G, Casalino G, et al. Optics & Laser Technology, 2015, 73, 118.
54 Kondapalli S P. IOP Conference Series: Materials Science and Enginee-ring, 2017, 283(1), 012007.
55 Doomra A, Sandhu S S, Singh B. Metallurgical and Materials Enginee-ring, 2020, 26(3), 279.
56 Shah P H, Badheka V J. Journal of Materials: Design and Application, 2019, 233(6), 1191.
57 Patel V, Li W, Vairis A, et al. Critical Reviews in Solid State & Material Sciences, 2019, 8(7), 378.
58 Ahn B W, Choi D H, Kim D J, et al. Materials Science & Engineering A, 2012, 532, 476.
59 Gao X L, Xia T D, Wang X J, et al. Metallic Functional Materials, 2009, 16(6), 60 (in Chinese).
高晓龙, 夏天东, 王晓军, 等. 金属功能材料, 2009, 16(6), 60.
60 Zhou S L, Tao J, Guo D L. Welding & Joining, 2009(8), 11 (in Chinese).
周水亮, 陶军, 郭德伦. 焊接, 2009(8), 11.
61 Qi B J, Yang M X, Cong B Q, et al. International Journal of Advanced Manufacturing Technology, 2013, 66(9-12), 1545.
62 Kou S, Le Y. Weldig Journal, 1986, 65(12), 305.
63 Ram G, Murugesan R, Sundaresan S. Journal of Materials Engineering and Performance, 1999, 8(5), 513.
64 Arturo G R M, Hugo L M V, Rafael G H, et al. Materials Science Forum, 2013, 755, 61.
65 Long Q, Zhong Y B, Yu Z P, et al. Materials China, 2020, 39(6), 472 (in chinese).
龙琼, 钟云波,余正平, 等.中国材料进展, 2020, 39(6), 472.
66 Flynn H. Physical Acousties, 1964, 167(1), 30.
67 Tarasov S Y, Vorontsov A V, Fortuna S V, et al. Weld in the World, 2019, 63, 875.
68 Methong T, Poopat B. Key Engineering Materials, 2013, 545, 177.
69 Muhammed A, Hakeem O, Shahjahan M. Materials Science and Enginee-ring: Chinese and English version A, 2011, 1(3), 321.
70 Ramkumar K D, Chandrasekar A, Singh A K, et al. Journal of Manufacturing Processes, 2016, 20, 54.
71 Xie Y, Cai Y C, Zhang X, et al. The International Journal of Advanced Manufacturing Technology, 2018, 99, 347.
72 Ma L, Hu S S, Hu B, et al. Transactions of Tianjin University, 2014, 20, 429.
73 Doomra A, Sandhu S S, Singh B, et al. Metallurgical and Materials Engineering, 2020, 26(3), 279.
74 Zhang Z D, Li D Q, Yin X H, et al. Welding, 2002(3), 5(in Chinese).
张忠典, 李冬青, 尹孝辉,等.焊接, 2002(3), 5.
75 Lu L. Research on arc behavior of high frequency electromagnetic double pulse TIG welding. Ph.D. Thesis,Shenyang University of Technology, China, 2014 (in Chinese).
路林. 高频电磁双脉冲TIG焊电弧行为研究. 博士学位论文, 沈阳工业大学, 2014.