焊接熔池中元素分布规律及其影响因素的研究进展<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.011.011

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1528KB)
Export: BibTeX | EndNote (RIS)

Abstract The fluid flow and heat transfer in welding process has a great influence on the shape of welding pool, the absorption and accumulation of gas and inclusions, especially on the distribution of elements in the molten pool. Sufficient researches have showed that the fluid in the molten pool is mainly affected by surface tension, force and electromagnetic force, in which the effect of the surface tension is the key factor on the welding pool shape. The welding heat input and the welding speed also have different effects on the formation of the welding pool. The element interdiffusion phenomenon occurs at the interface between different materials. The diffusion coefficient is obviously distinct for diverse elements at different diffusion depth, but it is similar for the same elements. The uniform distribution of the elements has a significant influence on the quality of the welding joint. In the future, the research will focus on the specific diffusion form and the segregation of elements in the molten pool.

Key words： welding element distribution welding pool flow diffusion

Published: 04 May 2018

CLC number:

TB31

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Qian
	BAI Fang
	DING Hongsheng
	TONG Lige
	GAO Ting
	BAI Shiwu
	YU Jiangfeng

Cite this article:

GAO Qian,BAI Fang,DING Hongsheng, et al. Influencing Factors of Element Distribution in Welding Pool: A Review[J]. Materials Reports, 2017, 31(11): 80-85.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.011.011 OR http://www.mater-rep.com/EN/Y2017/V31/I11/80

1 Li Qiang,Qian Bainian. Progress of heat transfer and fluid flow si-mulation in weld pool[J]. Trans China Weld Inst,2002,23(4):91(in Chinese).
李强, 钱百年. 焊接熔池的传热与流体流动模拟进展 [J]. 焊接学报,2002,23(4):91.
2 Cao Zhenning,Wu Chuansong,Wu Lin.Effect of surface deformation on fluid flow and heat tranfer in TIG weld pool[J]. Met Sci Tech-nol,1992,11(3-4):108(in Chinese).
曹振宁, 武传松, 吴林. TIG焊接熔池表面变形对流场与热场的影响 [J]. 金属科学与工艺,1992, 11(3-4):108.
3 Sun Dexin,Sun Daqian,Li Jinbao,et al. Research progress and application of welding technology of magnesium alloys[J]. Mater Rev,2006,20(8):122(in Chinese).
孙德新, 孙大千, 李金宝, 等. 镁合金焊接技术的研究进展及应用 [J]. 材料导报,2006,20(8):122.
4 Zhao Yuzhen.Simulation of fluid dynamics behavior and solidified structure in welding pool[D]. Beijing: Beijing University of Technology,2004(in Chinese).
赵玉珍. 焊接熔池的流体动力学行为及凝固组织模拟 [D]. 北京:北京工业大学,2004.
5 Chen Yan,Mu Hao,Ding Wei.R&D progress on technology for producing pipeline steel at home and aboard[J]. Steel Rolling,2012,29(2):37(in Chinese).
陈妍, 牟昊, 丁伟. 国内外管线钢最新研发进展 [J]. 轧钢,2012,29(2):37.
6 Wu Chuansong,Chen Dinghua,Wu Lin.Numerical simulaiton of the fluid flow and heat transfer in TIG welding molten pools[J]. Trans China Weld Inst,1988,9(4):264(in Chinese).
武传松, 陈定华, 吴林. TIG焊接熔池中的流体流动及传热过程的数值模拟 [J]. 焊接学报,1988, 9(4):264.
7 Zhou Qi,Liu Fangjun,Qi Bojin. Composition distribution and flow characteristics of electron beam deep penetration welding[J]. China Mech Eng,2003,14(5):406(in Chinese).
周琦, 刘方军, 齐铂金. 电子束深穿透焊接熔质成分分布与熔池流动特征 [J]. 中国机械工程, 2003,14(5):406.
8 Li Haitao,Li Muqin,Han Tao,et al. Composition distribution and flow characteristics of electron beam deep penetration welding[J]. Trans China Weld Inst,2014,35(1):91(in Chinese).
李海涛, 李慕勤, 韩涛,等. TIG焊对低合金钢焊缝金属元素分布状态的影响 [J]. 焊接学报,2014, 35(1):91.
9 Zhao Yuzhen,Shi Yaowu. Effect of surface-active element sulfur on flow pattern and aspect ratio of weld pool [J]. Chin J Mech Eng,2004,16(4):7(in Chinese).
赵玉珍,史耀武. 表面活性元素硫对焊接熔池中流体流动方式和熔池深宽比的影响[J].钢铁研究学报,2004,16(4):7.
10 Shi Yu,Guo Zhaobo,Xu Lesheng,et al.Numerical simulation of the force in TIG welding pool base on fluent[J]. Electric Weld Mach,2011,41(9):21(in Chinese).
石玗, 郭朝博, 许乐生, 等. 基于Fluent熔池内部受力的数值分析 [J]. 电焊机, 2011, 41(9):21.
11 Han Yi,Ban Chunyan,Ba Qixian,et al. Effect of magnetic field on Microstructure of interface between liquid aluminum and solid iron[J]. Acta Physica Sin,2005,54(6):2955(in Chinese).
韩逸, 班春燕, 巴启先, 等. 磁场对液态铝和固态铁界面微观组织的影响 [J]. 物理学报,2005, 54(6):2955.
12 Liu T, Wang Q, Zhang H W, et al. Effects of high magnetic fields on solidification microstructure of Al-Si alloys [J]. J Mater Sci,2010,46(6):1628.
13 Miyake T, Inatomi Y, Kuribayashi K. Measurement of diffusion coefficient in liquid metal under static magnetic field [J]. Jpn J Appl Phys,2002,41(Part 2):L811.
14 Kou S, Wang Y H. Computer simulation of convection in moving arc weld pools [J]. Metall Mater Trans A,1986,17(12):2271.
15 Zhao Yuzhen,Shi Yaowu.Effect of surface-active element sulfur on flow pattern and aspect ratio of weld pool[J].J Iron Steel Res,2004,16(4):7(in Chinese).
赵玉珍,史耀武.表面活性元素硫对焊接熔池中流体流动方式和熔池深宽比的影响[J].钢铁研究学报,2004,16(4):7.
16 Fujii H, Nogi K. Time dependant weld shape in Ar-O₂shielded stationary GTA welding [J]. J Mater Sci Technol,2007,23(5):650.
17 Zhao Lin, Tsukamoto Susumu,Arakane Goro,et al. Distribution of wire feeding elements in laser-arc hybrid welds[J]. Chin J Lasers,2015,42(4):0406006(in Chinese).
赵琳, 塚本进, 荒金吾郎, 等. 激光-电弧复合焊焊缝合金元素分布的研究 [J]. 中国激光,2015, 42(4):0406006.
18 Sahoo P, Debroy T, Mcnallan M J. Surface tension of binary metal-surface active solute systems under conditions relevant to welding metallurgy [J]. Metall Mater Trans B,1982,143(2):483.
19 Zhao Yuzhen,Lei Yongping,Shi Yaowu.Effects of surface-active elements sulfur on flow patterns and depth/width ratio of welding pool[J]. Chin J Mech Eng,2004,40(9):138(in Chinese).
赵玉珍, 雷永平, 史耀武. 表面活性元素硫对焊接熔池流动方式和深宽比的影响 [J]. 机械工程学报,2004,40(9):138.
20 Huang Yong,Zhang Zhiguo,Wang Yanlei. Nitrogen distribution in molten pool of gas pool coupled activiting TIG welding with rapid cooling method[J]. Trans China Weld Inst,2015,36(2):31(in Chinese).
黄勇, 张治国, 王艳磊. 气体熔池耦合活性TIG焊熔池N元素分布骤冷分析[J]. 焊接学报,2015, 36(2):31.
21 Luo Chuanhong,Peng Weiping,Guo Lijie,et al.Performance of aluminum alloy 2219 joints welded by friction stir welding[J]. J Chongqing Institute Technology,2014,28(10):38(in Chinese).
罗传红,彭卫平, 郭立杰, 等.2219高强铝合金搅拌摩擦焊接头组织和性能分析[J]. 重庆理工大学学报,2014,28(10):38.
22 Pei Yinglei,Shan Jiguo,Ren Jialie.Effect of welding speed on melt flow behavior in high speed laser welding porcess[J]. Chin J Lasers,2013,40(5):56(in Chinese).
裴莹蕾, 单际国, 任家烈. 焊接速度对高速激光焊熔池流动行为的影响 [J]. 中国激光,2013, 40(5):56.
23 Li Li,Hu Shengsun,Yin Fengliang,et al.3-D numerical simulation of temperature field in molten pool of plasma arc welding[J].J Tianjin university: Nat Sci Eng Technol,2007,40(10):1260(in Chinese).
李力, 胡绳荪, 殷凤良, 等. 等离子弧焊接熔池温度场的三维数值模拟 [J]. 天津大学学报:自然科学与工程技术版,2007,40(10):1260.
24 Li Yan. Simulation and verification of keyhole and weld pool thermal force coupled transport processes in plasma arc welding[D].Beijing:University of Science and Technology Beijing,2014(in Chinese).
李岩. 等离子弧焊接小孔和熔池热—力耦合输运过程的模拟及验证 [D]. 北京:北京科技大学, 2014.
25 Tong Lige,Li Lei,Gu Jingchen,et al.Effect of heat input on the shape of welding pool with high tempetature[J]. J Eng Thermophys,2015,36(1):120(in Chinese).
童莉葛, 黎磊, 谷京晨, 等. 焊接热输入对高温熔池形态的影响 [J]. 工程热物理学报,2015, 36(1):120.
26 Yan Chunyan, Liu Cuiying, Zhang Genyuan. Simulation of hydrogen diffusion in welded joint of X80 pipeline steel [J]. J Central South University,2014,21(12):4432.
27 Jiang W C, Gong J M, et al. 3-D finite element analysis of the effect of welding residual stress on hydrogen diffusion in hydrogen contained environment [J]. Acta Metall Sin, 2007,20(5):347.
28 Cao Xiaolian,Xu Peiquan,Cao Zhuoyue,et al.Research on microstructure and element diffusion in YG20/45# steel laser welds[J]. Chin J Lasers,2015,42(3):0303006(in Chinese).
曹晓莲, 徐培全, 曹卓玥, 等. YG20/45#钢激光焊焊缝组织与界面元素扩散研究 [J]. 中国激光, 2015,42(3):0303006.
29 Jiao Shaoyang,Dong Jianxin,Zhang Maicang,et al. Investigation on elements inter-diffusion in reaction layer during hip between corrosion-resistant alloy and carbon steel[J]. J Mater Eng, 2009(12):10(in Chinese).
焦少阳, 董建新, 张麦仓, 等. 耐蚀合金/碳钢热等静压扩散焊接反应层元素互扩散规律研究 [J]. 材料工程,2009(12):10.
30 Tong Lige,Gu Jingchen,Liu Yongxu,et al.Elements distributions of high-temperature weld pool using SMAW[J]. J Eng Thermophys,2015,36(5):1120(in Chinese).
童莉葛, 谷京晨, 刘永旭, 等. 基于SMAW高温熔池流动的元素分布 [J]. 工程热物理学报,2015, 36(5):1120.
31 Liu X B, Yu G, Guo J, et al. Research on laser welding of cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft [J]. J Alloys Compd,2008,453(1-2):371.
32 Xu Peiquan,Yang Dexin,Zhao Xiujuan,et al.Interfacial analysis is of welding joint formed during TIG welding of WC-Co and carbon steel[J]. J Shanghai Jiaotong University,2005,39(7):1050(in Chinese).
徐培全, 杨德新, 赵秀娟, 等. WC-Co系硬质合金TIG焊接头界面扩散分析 [J]. 上海交通大学学报, 2005,39(7):1050.
33 Ge Maozhong,Xiang Jianyun,Zhang Yongkang.Research on the properties of stress corrosion cracking for tungsten inert-gas arc welded AZ31B magnesium alloy[J]. Mater Rev:Res,2013, 27(2):40(in Chinese).
葛茂忠, 项建云, 张永康. AZ31B镁合金TIG焊接件应力腐蚀性能研究 [J]. 材料导报:研究篇,2013, 27(2):40.
34 Ghosh M, Chatterjee S. Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel [J]. Mater Charact,2005,54(s4-5):327.
35 Ghosh M, Chatterjee S, Mishra B. The effect of intermetallics on the strength properties of diffusion bonds formed between Ti-5.5Al-2.4V and 304 stainless steel [J]. Mater Sci Eng A,2003, 363(1-2):268.
36 Peng X K, Wuhrer R, Heness G, et al. Rolling strain effects on the interlaminar properties of roll bonded copper/aluminium metal laminates [J]. J Mater Sci,2000,35(17):4357.
37 Jiang Haitao, et al. A novel diffusion model considering curvature radius at the bonding interface in a titanium/steel explosive clad plate [J]. Int J Miner Metall Mater,2015, 22(9):56.