METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research Progress on the Influence of Nanoparticles on Weld Strength and Microstructure of Aluminum Alloy |
LI Zhuoxin1,2, TIAN Zhen1, LI Hong1,2, WANG Yipeng1, CAO Jian2, ZHOU Chen3
|
1 College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China 2 State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China 3 Jiangsu Hengyi Metal Products Co., Ltd., Taizhou 225400, Jiangsu, China |
|
|
Abstract Aluminum alloy is one of the most widely used materials in modern society because of its characteristics such as low density, high specific strength and good corrosion resistance. Nano-ceramic particles have the advantages of high strength, high modulus, good thermal stability, etc. With the continuous development of nano-material technology, the application of nano-ceramic particles as strengthening materials in aluminum alloy welding has been paid more and more attention. In the process of aluminum alloy welding, the problems such as weld microstructure roughening, joint softening and thermal crack are easy to lead to the failure of aluminum alloy joint in service.The addition of nanoparticles into welding seams has the functions of refining weld grain, modifying secondary phase morphology, reducing welding heat crack, and strengthening weld performance. It has been used in the welding field of high strength aluminum alloy such as aviation, aerospace, automobile and high-speed bullet vehicle. Recent studies have shown that the content, composition and other physical properties of nanoparticles, welding technology and nanoparticle-matrix interface have significant effects on the microstructure and mechanical properties of welding seams. With the increase of the content of nanoparticles, the weld strength was significantly increased, but the high content of nanoparticles was easy to induce agglomeration. Different kinds of nanoparticles can play a synergistic strengthening role. In addition, welding current, friction stir parameters, ultrasonic, vibration and other technological methods in the welding process can promote the flow of molten pool to improve the dispersion degree of nanoparticles in the welding seam and enhance the strengthening effect of nanoparticles. In this paper, the latest research status of nano-ceramic particles in aluminum alloy welding in recent years was reviewed, and the influence of the physical properties and welding technology of nano-ceramic particles on the strength of composite weld was summarized. The influence of nano-ceramic particles on the microstructure and thermal crack of welding seam was analyzed, the interface bonding between nano-particles and matrix was discussed, and the future research direction was prospected.
|
Published: 13 January 2022
Online: 2022-01-13
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China(52074017),the Natural Science Foundation of Beijing(3202002), State Key Lab of Advanced Welding and Joining (AWJ-20-M01) and Harbin Institute of Technology and 2019 Taishan Industry Leading Talents(20190510). |
|
|
[1] Morin D, Fourmeau M, Brvik T, et al. European Journal of Mechanics-A/Solids, 2018, 69,99. [2] Li H, Liu X S, Zhang Y S, et al. Materials Reports A:Review Papers, 2019, 33(12), 3853(in Chinese). 李红, 刘旭升, 张宜生, 等. 材料导报:综述篇, 2019, 33(12), 3853. [3] Wu Z S, Jin P F, Gao S, et al.Welding Technology, 2010 (1), 1(in Chinese). 吴志生, 靳鹏飞, 高珊, 等. 焊接技术, 2010 (1), 1. [4] Nassar A E, Nassar E E. Journal of King Saud University-Engineering Sciences, 2017, 29(3), 295. [5] Panwar N, Chauhan A. Materials Today: Proceedings, 2018, 5(2), 5933. [6] Li Z X, Cao X T, Wolfgang T. Journal of Beijing University of Technology, 2017, 43(10), 1582(in Chinese). 栗卓新, 曹晓涛, Wolfgang Tillmann.北京工业大学学报, 2017, 43(10), 1582. [7] Alizadeh M, Paydar M H. Journal of Alloys and Compounds, 2010, 492(1-2), 231. [8] Fattahi M, Mohammady M, Sajjadi N, et al. Journal of Materials Processing Technology, 2015, 217, 21. [9] Florián-Algarín D, Ramos-Morales A, Marrero-García M, et al. Journal of Composites Science, 2018, 2(3), 50. [10] Javadi A, Cao C, Li X. Procedia Manufacturing, 2017, 10, 531. [11] Kumar K S A, Murigendrappa S M, Kumar H. Journal of Materials Research, 2019, 34(7), 1229. [12] Xing W, Yu X, Li H, et al. Journal of Alloys and Compounds, 2017, 695, 574. [13] Ramkumar K R, Natarajan S. Materials Science and Engineering: A, 2018, 727, 51. [14] Sanaty-Zadeh A. Materials Science and Engineering: A, 2012, 531, 112. [15] Ye X P, Li Y L, Weng J D, et al. Journal of Materials Engineering, 2018, 46(12), 28(in Chinese). 叶想平, 李英雷, 翁继东, 等.材料工程, 2018, 46(12), 28. [16] Alizadeh M. Materials Research Bulletin, 2014, 59, 290. [17] Mehrabi K, Khodabakhshi F, Zareh E, et al. Journal of Alloys and Compounds, 2016, 688, 143. [18] Rahmatian B, Dehghani K, Mirsalehi S E. Journal of Manufacturing Processes, 2020, 52, 152. [19] Fattahi M, Noei Aghaei V, Dabiri A R, et al. Materials Science and Engineering: A, 2015, 648, 47. [20] Nie J, Wu Y, Li P, et al. CrystEngComm, 2012, 14(6), 2213. [21] Xiang Z B, Nie J H, Wei S H, et al. Chinese Journal of Materials Research, 2015, 29(10), 744(in Chinese). 向兆兵, 聂俊辉, 魏少华, 等.材料研究学报, 2015, 29(10), 744. [22] Ahmadi E, Ranjkesh M, Mansoori E, et al. Journal of Manufacturing Processes, 2017, 26, 173. [23] Shen J, Liu K, Li Y, et al. Science and Technology of Welding and Joi-ning, 2013, 18(5), 404. [24] Xie X, Shen J, Cheng L, et al. Materials & Design, 2015, 81, 31. [25] Muzamil M, Wu J, Akhtar M, et al. Diamond and Related Materials, 2019, 97, 107442. [26] Kulkarni A, Dwivedi D K, Vasudevan M. Materials Science & Enginee-ring A, 2018, 731, 309. [27] Fattahi M, Rostami M, Amirkhanlu F, et al. Diamond and Related Materials, 2019, 99, 107518. [28] Tsao L C, Chang S Y, Lee C I, et al. Materials & Design, 2010, 31(10), 4831. [29] Xing W, Yu X, Li H, et al. Materials Science and Engineering: A, 2016, 678, 252. [30] Tang Y, Li G Y, Pan Y C. Materials & Design, 2014, 55, 574. [31] Singh T, Tiwari S K, Shukla D K. Materials Characterization, 2020, 159, 110047. [32] Eskandari H, Taheri R, Khodabakhshi F. Materials Science and Engineering: A, 2016, 660, 84. [33] Sahraeinejad S, Izadi H, Haghshenas M, et al. Materials Science and Engineering: A, 2015, 626, 505. [34] Hu Q H, Zhang Y F, Xiong S, et al. Chinese Journal of Rare Metals, 2019, 43(10), 1023(in Chinese). 胡清华, 张义福, 熊斯, 等. 稀有金属, 2019, 43(10), 1023. [35] Muzamil M, Wu J, Samiuddin M. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(1), 5. [36] Xie X, Shen J, Gong F, et al. Science and Technology of Welding and Joining, 2015, 20(8), 686. [37] Fattahi M, Ghaheri A, Arabian N, et al. Journal of Materials Processing Technology, 2020, 282,116672. [38] Yousefpour N H, Omidvar H, Farahmand N M. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2016, 232(10), 816. [39] Kumar K S A, Murigendrappa S M, Kumar H, et al. Advances in mechanical design, materials and manufacture: Proceedings of the First International Conference on Design, Materials and Manufacture (ICDEM 2018). 2018. [40] Mirjavadi S S, Alipour M, Emamian S, et al. Journal of Alloys and Compounds, 2017, 712, 795. [41] Hamdollahzadeh A, Bahrami M, Farahmand N M. et al. Journal of Manufacturing Processes, 2015, 20, 367. [42] Bahrami M, Givi M K B, Dehghani K, et al. Materials & Design, 2014, 53, 519. [43] Fouladi S, Abbasi M. Journal of Materials Processing Technology, 2017, 243, 23. [44] Holzer M, Hofmann K, Mann V, et al. Physics Procedia, 2016, 83, 463. [45] Li J, Liu Q, Shi R, et al. Journal of Materials Processing Technology, 2008, 208(1-3), 105. [46] Guo J, Gougeon P, Chen X G. Materials Science and Engineering: A, 2012, 553, 149. [47] Chen L Y, Xu J Q, Li X C. Materials Research Letters, 2014, 3(1), 43. [48] Martin J H, Yahata B D, Hundley J M, et al. Nature, 2017, 549(7672), 365. [49] Ma C, Chen L, Cao C,et al. Nat Commun, 2017, 8, 14178. [50] Choi Hongseok, Cho Woo-hyun, et al. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2013, 44A(4), 1897. [51] Sokoluk M, Cao C, Pan S, et al. Nature communications, 2019, 10(1), 1. [52] Zuo M, Sokoluk M, Cao C, et al. Scientific reports, 2019, 9(1), 1. [53] Zhao Z, Liu L, Choi H S, et al. Microelectronics Reliability, 2016, 60, 126. [54] Ding M, Xing W, Yu X. et al. Journal of Alloys and Compounds, 2018, 739, 481. [55] Ding M. Ultrasonics Sonochemistry, 2019, 52, 150. [56] Rahmatian B, Dehghani K, Mirsalehi S E. Journal of Manufacturing Processes, 2020, 52, 152. [57] Bodaghi M, Dehghani K. The International Journal of Advanced Manufacturing Technology, 2016, 88(9-12), 2651. [58] Moradi M M, Jamshidi Aval H, Jamaati R, et al. Materials Characterization, 2019, 152, 169. [59] Yousefpour N H, Omidvar H, Farahmand N M. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2016, 32(10), 816. [60] Ghasali E, Alizadeh M, Ebadzadeh T. Journal of Alloys and Compounds, 2016, 655, 93. [61] Guo B, Zhang X, Cen X, et al. Materials Characterization, 2018, 136, 272. [62] Meng C, Cui H C, Lu F G, et al. Transactions of Nonferrous Metals Society of China, 2013, 23(6), 1543. [63] Liu Z Y, Xiao B L, Wang W G, et al. Carbon, 2013, 62, 35. [64] Kong Y R, Guo Q, Zhang D. Materials Reports A:Review Papers, 2015, 29(9), 34(in Chinese). 孔亚茹, 郭强, 张荻.材料导报:综述篇,2015, 29(9), 34. [65] Kwon H, Park D H, Silvain J F, et al. Composites Science and Technology, 2010, 70(3), 546. [66] Guo B, Chen B, Zhang X, et al. Carbon, 2018, 135, 224. [67] Li Y Z, Wang Q Z, Xiao B L, et al. Journal of Materials Processing Technology, 2018, 251, 305. [68] Shin J H, Choi H J, Cho M K, et al. Journal of Composite Materials, 2012, 48(1), 99. [69] Li Y, Zhao Y, Ortalan V, et al. Materials Science and Engineering: A, 2009, 527(1-2), 305. |
|
|
|