METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research Progress of Aluminum Foam Sandwich |
ZHANG Zichen1, XU Tao1, WU Yiqing1, XU Yuelei1, XIA Xingchuan1,2, DING Jian1, CHEN Xueguang1, LIU Haifeng3, HAN Xing3, GAO Yugang3, LIU Yongchang2
|
1 School of Material Science and Engineering, Hebei University of Technology, Tianjin 300401, China 2 School of Material Science and Engineering, Tianjin University, Tianjin 300072, China 3 CITIC Dicastal Co., Ltd., Qinhuangdao 066300, China |
|
|
Abstract Closed-cell aluminum foam is a structure-function integrated porous material, which has the advantages of light weight, high specific strength specific stiffness and high energy absorption capacity. However, aluminum foam still has some shortcomings such as poor mechanical prope-rties of the single-layer surface, high surface roughness and poor corrosion resistance. In order to solve the above problems, the researchers designed and developed aluminum foam sandwich (AFS), and the preparation methods are mainly divided into physical connection methods and metallurgical connection methods. AFS prepared by the traditional physical connection method has the defects of low interface bonding strength and poor weather resistance; AFS produced by metallurgical connection methods such as powder metallurgy and welding method realizes the metallurgical combination between the core material and the panel, which greatly improves the mechanical properties and service life, but there are still unfavorable factors such as a small product size range, complex process, low production efficiency, and high cost. At present, the researches on the mechanical properties of AFS mainly focus on quasi-static and dynamic deformation, failure modes, energy absorption capabilities, etc. The researches show that dynamic and static mechanical properties are mainly controlled by the properties of solid panels and aluminum foam core, interface bonding strength and test parameters. In recent years, the finite element analysis method has gradually been favored by researchers, but there are still many problems that need to be solved. This paper, combined with domestic and foreign literature, outlined the prepa-ration technology, mechanical properties research progress and industrial application prospects of AFS in recent years. The main preparation technologies were introduced from the physical connection and metallurgical connection of the solid panel and the aluminum foam core layer. The main influencing factors and mechanisms of quasi-static and dynamic mechanical properties were discussed and summarized, the domestic and international application status were analyzed and the application prospect was prospected.
|
Published: 10 December 2021
Online: 2021-12-23
|
|
Fund:Key R & D Program of Hebei Province (19251013D), Civil-Military Integration Project of Hebei Province, Provincial School Cooperation Fund of Hebei Province. |
Corresponding Authors:
xc_xia@hebut.edu.cn
|
About author: Zichen Zhang graduated from Jiangsu University of Science and Technology in June 2018 with a bachelor's degree in engineering. Now he is a Ph.D. student of the School of Materials Science and Engineering, Hebei University of Technology. His main research area is aluminum foam structural materials. Xingchuan Xia, Ph.D. (post) in engineering, asso-ciate researcher, doctoral tutor; served as member of a council of Youth Committee of Chinese Society for Materials Research, “Three-Three-Three” talents of Hebei Province, “Yuan-guang Scholar” of Hebei University of Technology; won the second prize of technical invention in Hebei province as the first accomplisher, won the first prize of science and technology progress of Hebei province as the third accomplisher; presided over the sub- projects of the National Key R & D Program, the Pre-research Fund of the Central Military Commission's Department of Decoration and Development, the National Natural Science Foundation Consolidated Development Projects, Key R & D Plans of Hebei Province, Scientific and Technological Cooperation Development Fund Projects of Hebei Provincial Schools, Scientific and Technological Plan Projects of Hebei Province, Horizontal Scientific and Technological Development Projects; published more than 30 SCI journal papers as the first author / corresponding author; authorized 9 national invention patents as the first inventor. |
|
|
1 Banhart J. Progress in Materials Science, 2001, 46(6),559. 2 Banhart J, Weaire D. Physics Today, 2002, 55(7),37. 3 Zhang Z, Ding J, Xia X C, et al. Materials & Design, 2015, 88,359. 4 Mu J C, Xi H F, Long Z Q, et al. Journal of Experimental Mechanics, 2009, 24(3),223 (in Chinese). 穆建春, 习会峰, 龙志勤, 等. 实验力学, 2009, 24(3),223. 5 Li J. Research on strengthening process and mechanism of high porosity open-pore aluminum foam. Master's Thesis, Taiyuan University of Science and Technology, China, 2016 (in Chinese). 李杰. 高孔隙率通孔泡沫铝的强化工艺与机理研究.硕士学位论文, 太原科技大学, 2016. 6 Mondal D P, Jha N, Gull B, et al. Materials Science & Engineering A, 2013, 560,601. 7 Liu Y Q, Fan J Z, Ma Z L, et al. Materials Reports A: Review Papers, 2017, 31(7),101 (in Chinese). 刘彦强, 樊建中, 马自力, 等.材料导报:综述篇, 2017, 31(7),101. 8 Banhart J, Seeliger H W. Advanced Engineering Materials, 2008, 10(9),793. 9 Banhart J, Seeliger H W. Advanced Engineering Materials, 2012, 14(12),1082. 10 Schwingel D, Seeliger H W, Vecchionacci C, et al. Acta Astronautica, 2007, 61(1-6),326. 11 Zhang M, Chen C J, Yao G C. Materials Reports, 2008, 22(1),90 (in Chinese). 张敏, 陈长军, 姚广春.材料导报, 2008, 22(1),90. 12 Song B N. Study on preparation of aluminum foam sandwich and mechanical properties.Ph.D. Thesis, Northeastern University, China, 2012 (in Chinese). 宋滨娜. 金属泡沫铝夹芯板的制备与力学性能研究.博士学位论文, 东北大学, 2012. 13 Harte A M, Fleck N A, Ashby M F. Advanced Engineering Materials, 2000, 2(4),219. 14 Crupi V, Montanini R. International Journal of Impact Engineering, 2007, 34(3),509. 15 Kulkarni N, Mahfuz H, Jeelani S, et al. Composite Structures, 2003, 59(4),499. 16 Wang N Z, Chen X, Li A, et al. Transactions of Nonferrous Metals Society of China, 2016, 26(2),359. 17 Jin M J, Zhao Y T, Dai Q X, et al. Journal of Materials Science and Engineering, 2005, 23(4),585. 金明江, 赵玉涛, 戴起勋,等. 材料科学与工程学报, 2005, 23(4),585. 18 Chen S. Study on preparation and mechanical property of basalt fiber reinforced foam aluminum sandwich panels. Master's Thesis, Harbin Engineering University, 2012 (in Chinese). 陈思. 玄武岩纤维增强泡沫铝夹层板的制备与力学性能研究. 硕士学位论文, 哈尔滨工程大学, 2012. 19 Sun W. Fundamental research on preparation of aluminum foam sandwich. Master's Thesis, Northeastern University, China, 2013 (in Chinese). 孙威. 泡沫铝夹芯板制备工艺基础研究.硕士学位论文, 东北大学, 2013. 20 Liu J. Study on preparation and mechanical properties of aluminum foam sandwich. Master's Thesis, Northeastern University, China, 2014 (in Chinese). 刘佳. 泡沫铝夹芯板的制备与力学性能研究.硕士学位论文, 东北大学, 2014. 21 王远林, 赵祥云, 李伟,等. 中国专利,CN205399876U, 2016. 22 Song X F. Study on pull off damage of the composite foam sandwich panels which embedded bolted joints.Master's Thesis, Harbin Engineering University, 2014 (in Chinese). 宋小飞. 复合材料泡沫夹芯板预埋螺栓连接拉脱破坏的研究. 硕士学位论文, 哈尔滨工程大学, 2014. 23 Raeisi S, Kadkhodapour J, Tovar A. Composite Structures, 2019, 214,34. 24 Sun Q. Study on preparation, characterization and properties of aluminum alloy foam by powder metallurgy method.Master's Thesis, General Research Institute for Nonferrous Metals, China, 2016 (in Chinese). 孙琦. 粉末冶金泡沫铝合金的制备、表征与性能研究.硕士学位论文, 北京有色金属研究总院, 2016. 25 Wang L C, Chen Y Y, You X H, et al. Powder Metallurgy Technology, 2010, 28(6),434 (in Chinese). 王录才, 陈玉勇, 游晓红, 等.粉末冶金技术, 2010, 28(6),434. 26 Zu G Y, Zhang M, Yao G C. Rare Metal Materials and Engineering, 2008, 37(3),485 (in Chinese). 祖国胤, 张敏, 姚广春.稀有金属材料与工程, 2008, 37(3),485. 27 Zu G Y, Li H, Li B, et al. Special Casting & Nonferrous Alloys, 2009, 29(2),176 (in Chinese). 祖国胤, 李鸿, 李兵, 等.特种铸造及有色合金, 2009, 29(2),176. 28 Zhang M, Zu G Y, Yao G C, et al. Journal of Functional Materials, 2006, 37(2),281 (in Chinese). 张敏, 祖国胤, 姚广春, 等.功能材料, 2006, 37(2),281. 29 Zu G Y, Zhang M, Yao G C, et al. The Chinese Journal of Process Engineering, 2006, 6(6),973 (in Chinese). 祖国胤, 张敏, 姚广春, 等.过程工程学报, 2006, 6(6),973. 30 Zu G Y, Zou Y, Li H, et al. Journal of Northeastern University (Natural Science), 2009, 30(2), 246 (in Chinese). 祖国胤, 邹颖, 李鸿, 等.东北大学学报,自然科学版, 2009, 30(2),246. 31 Zu G Y, Hao L, Zhang M, et al. Journal of Northeastern University (Natu-ral Science), 2007, 28(12),55 (in Chinese). 祖国胤, 郝亮, 张敏, 等.东北大学学报,自然科学版, 2007, 28(12),55. 32 Guan Z H. On preparation of aluminum foam sandwich by packet rolling-powder metallurgy. Master's Thesis, Northeastern University, China, 2011 (in Chinese). 关志昊. 包套轧制—粉末冶金法制备泡沫铝夹心板材料的研究. 硕士学位论文, 东北大学, 2011. 33 Song B N, Zu G Y, Yao G C, et al. Journal of Northeastern University (Natural Science), 2011, 32(2),277 (in Chinese). 宋滨娜, 祖国胤, 姚广春, 等.东北大学学报,自然科学版, 2011, 32(2),277. 34 Ma J J, Song B N, Zhang S H, et al. Light Metals, 2015(2),45 (in Chinese). 马俊杰, 宋滨娜, 章顺虎, 等.轻金属, 2015(2),45. 35 Wang Y Q, Ren X P, Hou H L, et al. Powder Technology, 2015, 275,344. 36 Luo H J, Lin H, Zhao Z H, et al. Procedia Materials Science, 2014, 4,39. 37 Huang B S, Zhao X, Wu X P, et al. Materials Reports A: Review Papers, 2017, 31(10),69 (in Chinese). 黄本生, 赵星, 吴序鹏, 等.材料导报:综述篇, 2017, 31(10),69. 38 Li J H. Research on brazing process and the property of aluminum foam. Master's Thesis, Hebei University of Technology, China, 2015 (in Chinese). 李军晖. 泡沫铝钎焊工艺及性能的研究. 硕士学位论文, 河北工业大学, 2015. 39 Song Y F, Xiao L R, Zeng D L, et al. Mining and Metallurgical Engineering, 2014, 34(3),119 (in Chinese). 宋宇峰, 肖来荣, 曾德露, 等.矿冶工程, 2014, 34(3),119. 40 Zhang J, Cheng H F, Qin X X, et al. Material Research and Application, 2017, 11(3),167 (in Chinese). 张军, 程和法, 秦晓雄, 等.材料研究与应用, 2017, 11(3),167. 41 Huang Y X, Gong J, Lyu S X, et al. Materials Science & Engineering A, 2012, 552(5),283. 42 Yu C C. Preparation and reliability evalution of the aluminum foam sandwich.Master's Thesis, Harbin Institute of Technology, China, 2012 (in Chinese). 于冲冲. 泡沫铝夹芯三明治结构制备及可靠性评价. 硕士学位论文, 哈尔滨工业大学, 2012. 43 Wan L, Huang Y X, Lyu S X, et al. Composite Structures, 2015, 123,366. 44 Shi Y W, Tang W. Electric Welding Machine, 2000, 30(1),6 (in Chinese). 史耀武, 唐伟.电焊机, 2000, 30(1),6. 45 Liang W, Zhang C B, Wu Y Q, et al. Welding & Joinging, 2018(11),19 (in Chinese). 梁武, 张春波, 乌彦全,等. 焊接, 2018(11),19. 46 Hangai Y, Koyama S, Hasegawa M, et al. Materials Transactions, 2012, 53(4),584. 47 Kathuria Y P. Journal of Materials Processing Technology, 2003,142,466. 48 Zhang Z, Xia X C, Wang J, et al. Materials Science, 2016, 22(3),337. 49 Chen Q. Research on melt foaming preparation of aluminum foam core sandwich plate.Master's Thesis, Kunming University of Science and Technology, China, 2016 (in Chinese). 陈青. 泡沫铝芯夹层板的熔体发泡制备研究. 硕士学位论文, 昆明理工大学, 2016. 50 左孝青, 陈青, 陆建生, 等. 中国专利,CN105642671A, 2016. 51 Liu Z Y. Research on the preparation of aluminum foam sandwich plate by vacuum foaming. Master's Thesis, Kunming University of Science and Technology, China, 2016 (in Chinese). 刘占勇. 泡沫铝芯夹层板的真空发泡制备研究. 硕士学位论文, 昆明理工大学, 2016. 52 Krner C, Hirschmann M, Wiehler H. Materials Transactions, 2006, 47(9),2188. 53 Hartmann J, Trepper A, Krner C. Advanced Engineering Materials, 2011, 13(11),1050. 54 Nabavi A, Khaki J V. Surface & Interface Analysis, 2010, 42(4),275. 55 Sha J B, Yip T H, Teo M H. Progress in Natural Science, Materials International, 2011, 21(2),127. 56 Zhang H S, Zhao H Y, Zhang M H, et al. Journal of Ningbo University (Natural Science & Engineering Edition), 2007, 20(1),118 (in Chinese). 谌河水, 赵恒义, 张明华, 等.宁波大学学报(理工版), 2007, 20(1), 118. 57 Yu J L, Wang X, Wei Z G, et al. International Journal of Impact Engineering, 2003, 28(3),331. 58 Yan L L, Yu B, Han B, et al. Composites Science and Technology, 2013, 86,142. 59 Endut N, Hazza M H F Al, Sidek A A, et al. Materials Science and Engineering, 2018, 290(1),012084. 60 Zhang H L, Dou R J, Zhao A, et al. Transactions of the Indian Institute of Metals, 2019, 72,693. 61 Zhao A, Qiu S W, Hu Y B, et al. Materials Transactions, 2017, 58(6),880. 62 Tian K N, Wang L C, Wang Y L, et al. Foundry Equipment and Techno-logy, 2015(6),48 (in Chinese). 田克楠, 王录才, 王艳丽, 等.铸造设备与工艺, 2015(6),48. 63 Yan L L, Han B, Yu B, et al. Materials & Design, 2014, 60,510. 64 Pandey A, Muchhala D, Kumar R, et al. Composites Part B, 2019, 183, 107729. 65 Styles M, Compston P, Kalyanasundaram S. Composite Structures, 2007, 80(4),532. 66 Yang X D, Cheng Y, Zheng Y X, et al. Hot Working Technology, 2019, 48(12),16 (in Chinese). 杨旭东, 成莹, 郑远兴, 等.热加工工艺, 2019, 48(12),16. 67 Mohan K, Yip T H, Idapalapati S, et al. Materials Science & Engineering A, 2011, 529,94. 68 Villanueva G R, Cantwell W J. Journal of Materials Science Letters, 2003, 22(6),417. 69 Xia Z C, Zhang J L, Zhou J Y, et al. Engineering Mechanics, 2017, 34(10),214 (in Chinese). 夏志成, 张建亮, 周竞洋, 等.工程力学, 2017, 34(10),214. 70 Abrate S. Composite Structures, 2001, 51(2),129. 71 Zhang M, Zu G Y, Yao G C, et al. Nonferrous Metals, 2008, 60(3),16 (in Chinese). 张敏, 祖国胤, 姚广春, 等.有色金属, 2008, 60(3),16. 72 Zu G Y, Liu J, Li X B, et al. Joumal of Nonheastem University (Natuml Science), 2014, 35(11),1583 (in Chinese). 祖国胤, 刘佳, 李小兵, 等.东北大学学报,自然科学版, 2014, 35(11),1583. 73 Yu J L, Wang E, Li J R, et al. International Journal of Impact Engineering, 2008, 35(8),885. 74 Xi H F, Tang L Q, Yu J L, et al. International Journal of Structural Stability & Dynamics, 2015, 15(4),1450063. 75 Han F S. Spacecraft Environment Engineering, 2013, 30(6),570 (in Chinese). 韩福生. 航天器环境工程, 2013, 30(6),570. 76 Su S N. Collision analysis of automotive power battery pack with lightweight foam aluminum sandwich panel structure. Master's Thesis, South China University of Technology, China, 2018 (in Chinese). 苏思诺. 轻质泡沫铝夹层板箱体结构的汽车动力电池包碰撞分析. 硕士学位论文, 华南理工大学, 2018. 77 Ma C C, Lan F C, Chen J Q, et al. Chinese Journal of Automotive Engineering, 2020, 10(1),34 (in Chinese). 马聪承, 兰凤崇, 陈吉清, 等.汽车工程学报, 2020, 10(1),34. 78 Banhart J. Mrs Bulletin, 2003, 28(4),290. 79 Lefebvre L P, Banhart J, Dunand D C. Advanced Engineering Materials, 2008, 10(9),775. 80 Zhang G Q. Foundry Technology, 2014, 35(12),2824 (in Chinese). 张国强.铸造技术, 2014, 35(12),2824. 81 Wang L C, Zeng S Y, Wang F. Materials For Mechanical Engineering, 2006, 30(10),56 (in Chinese). 王录才, 曾松岩, 王芳.机械工程材料, 2006, 30(10),56. 82 Yang Z H, Luo L F, Chen K B, et al. Light Metals, 2004(6),3 (in Chinese). 杨振海, 罗丽芬, 陈开斌, 等.轻金属, 2004(6),3. 83 Cao L Y, Luo X B, Liu G Q, et al. Packaging Engineering, 2018, 39(3),223 (in Chinese). 曹凌宇, 罗兴柏, 刘国庆, 等.包装工程, 2018, 39(3),223. 84 Zheng W. Research on design and anti-penetration properties of ceramic composite armor containing aluminum foam wave-absorbing layer. Ph.D. Thesis, Harbin Institute of Technology, China, 2015 (in Chinese). 郑伟. 含泡沫铝吸波层陶瓷复合装甲设计及其抗侵彻特性研究. 博士学位论文, 哈尔滨工业大学, 2015. 85 Teng P B, Cheng S J, Song X B,et al. Industrial Construction, 2016, 46(8),79 (in Chinese). 滕培宾, 程书剑, 宋晓冰, 等. 工业建筑, 2016, 46(8),79. 86 Wang J, Deng Y M, Fan Z C. Railway Vehicle, 2009, 47(3),23 (in Chinese). 王军, 邓艳民, 樊泽臣.铁道车辆, 2009, 47(3),23. 87 García-Moreno F. Materials, 2016, 9(2),85. |
|
|
|