INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
In-situ Vitrification Preparation and the Properties of Sapphire Surface |
SHEN Xiao1, WEI Qinhua1, ZHANG Weijie1, TANG Gao1, CHEN Zhenhua, QIN Laishun1, SHI Hongsheng2
|
1 College of Materials and Chemistry, China Jiliang University, Hangzhou 310018, China 2 Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011, China |
|
|
Abstract The sapphire samples with high transmittance were prepared successfully by in-situ surface vitrification process. The UV-visible transmittance spectra results show that the transmittance of rough surface sapphire was greatly improved. The theoretical transmittance of sapphire was enhanced from 85% to 90.2% by vitrification process. The physical properties, such as coefficient of thermal expansion (CTE), differential scanning calorimetry (DSC), refractive index and microhardness, have been measured and systematically discussed. The results show that the glass coating has good thermostability, excellent thermal expansion matching with sapphire and high microhardness. It is important that those properties can be tuned by adjusting the glass coating composition and thickness. This study indicates that the in-situ surface vitrification is an effectively method to reduce the polishing time and cost of sapphire and enhance the optical properties. It provides a useful guide toward the development of surface treatment technology.
|
Published: 25 November 2021
Online: 2021-12-13
|
|
Fund:National Natural Science Foundation of China (NSFC) (11975220, 51972291). |
About author: Xiao Shenis currently a master degree candidate at China Jiliang University. His research interests focus on the preparation and properties of synthetic crystals and optical material. Qinhua Wei, worked in China Jiliang University, associate professor, postgraduate tutor, received his master degree in material physics and chemistry in 2011 from China Jiliang University. In 2014, he received his Ph.D. degree in Shanghai Institute of Ceramics, University of Chinese Academy of Sciences. His research interests focus on the preparation and properties of scintillation crystals optical material and device. |
|
|
1 Eberle G, Schmidt M, Pude F, et al. Applied Surface Science, 2016, 378, 504. 2 Jeong C H, Kim D W, Bae J W, et al. Journal of Materials Science and Engineering B, 2002, 93, 60. 3 Miyazaki H, Hotta M, Kita H, et al. Ceramics International, 2012, 38, 1149. 4 Sheng P C, Zhao H, Bao J, et al. Journal of the Optical Society of America B: Optical Physics, 2013, 30, 405. 5 Patel B S, Zaidi Z H. Measurement Science and Technology, 1999, 10, 146. 6 Leem J W, Yeh Y, Yu J S. Optics Express, 2012, 20 (4), 4056. 7 Thomas I M. Applied Optics,1998, 27, 3356. 8 Lin Y S, Hsu W C, Huang K C, et al. Applied Surface Science, 2001, 258, 2. 9 Leem J W, Yu J S. Optics Express, 2012, 20, 26160. 10 Miyazki H, Hotta M, Kita H, et al. Ceramics International, 2012, 38 (2), 1149. 11 Trunec M, Klimke J, Shen Z J J. Journal of the European Ceramic Society, 2016, 36(16), 4333. 12 Kravets V G. Optics and Spectroscopy, 2005, 98(3), 405. 13 Wei Q H, Lin J, Shi H S, et al. ACS Applied Materials & Interfaces, 2018, 10, 7693. 14 Nicole T W, Sushmit G, Shefford P B. Journal of Non-Crystalline Solids, 2020, 543, 120. 15 Litzman O, Dub P, evćík V. Optics Communications, 1984, 49(3), 169. 16 Kryukova O N, Knyazeva A G, Pogrebenkov V.M, et al. Journal of Materials Science, 2017, 52(19), 11314. 17 He J, Avnir D, Zhang L. Acta Materialia, 2019, 174, 418. |
|
|
|