INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
A Review of Mn-based Low Temperature NH3-SCR Denitration Catalyst |
GUO Ziyang, HUO Wangchen, ZHANG Yuxin*, REN Shan, YANG Jian
|
College of Materials Science and Engineering, Chongqing University, Chongqing, 400044, China |
|
|
Abstract Selective catalytic reduction with Ammonia (NH3-SCR), which has received widespread attention by utilizing NH3 as reducing agents to achieve high-efficiency conversion of NOx. Although commercial V2O5-WO3(MoO3)/TiO2 catalysts have been came into service, however, in order to meet higher and more complex practical application requirements, especially the exploitation of low-temperature denitration catalysts still stimulate the development of novel SCR catalysts. Among varied metal oxide catalysts, manganese oxide exhibits great potential in low-temperature NH3-SCR reactions, which can be ascribed to its variable cation valence, unstable surface oxygen and excellent redox performance. However, the efficiency of current manganese-based denitration catalysts is still limited by the conversion rate of NOx, N2 selectivity, operating temperature window, and deactivation substances such as SO2 and H2O, alkaline/alkaline earth metals, and heavy metals. Therefore, in recent years, researchers have focused on improving the working efficiency of manganese-based low-temperature catalysts in the above four aspects, and have achieved fruitful results. On the premise of making full use of the advantages of manganese oxide, the work efficiency of manganese-based catalysts at low temperatures is significantly improved. In addition to studying the efficiency of single manganese oxide, researchers have used a variety of synthetic methods such as hydrothermal, water bath, and immersion methods to modify manganese oxides with transition metals and rare earth metals. The multi-element metal oxide formed after compounding and doping modification can greatly improve the ability to address the above four aspects. Moreover, by studying diffe-rent substrate materials supporting manganese oxide, such as TiO2, Al2O3, carbon materials and inorganic non-metallic minerals, the efficiency and stability of the catalyst can also be improved. And through in-depth exploration of the relevant reaction mechanisms of manganese-based low-temperature catalysts, including “Langmuir-Hinshelwood” “Eley-Rideal” and “Fast SCR” reaction mechanism, which can provide theoretical guidance for improving the efficiency of the catalyst. This review mainly summarizes the efforts made by researchers in recent years to improve the efficiency of manganese-based low-temperature catalysts, and the challenges of manganese-based catalysts, the regulation of manganese oxides and related reaction mechanisms are introduced respectively. Furthermore, we pay attention to the problems that confronting the current state-of-the-art manganese-based low-temperature catalysts and put forward corresponding prospects. It is expected to provide a reference for the preparation of high-efficiency, stable and environment-friendly low-temperature denitration catalysts in the future.
|
Published: 14 July 2021
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (21576034). |
About author:: Ziyang Guo received his B.S. Degree in 2018. He is currently pursuing his M.S. at the College of Materials Science and Engineering, Chongqing University under the supervision of Prof. Yuxin Zhang. His research has focused on photocatalysis and low-temperature SCR de-NOx with NH3. Yuxin Zhang completed his B. Eng. and M. Eng. in Chemical Engineering from Tianjin University in 2000 and 2003, respectively. He received his Ph.D. degree in Chemistry and Biomolecular Engineering from the National University of Singapore (NUS) in 2008 and continued to work as a research fellow in Prof. Huachun Zeng’s group at NUS until 2009. His research interest involves the preparation and application of nanomate-rials; synthesis and morphology control of supercapacitor electrode materials; advanced design and performance research of photo-catalytic materials. |
|
|
1 |
Chen L, Wang Q L, Wang X X, et al. Chemical Engineering Journal,2020,390,124251.
|
2 |
Shan Y L, Du J P, Yu Y B, et al. Applied Catalysis B-Environmental,2020,266,118655.
|
3 |
Schreck M, Niederberger M. Chemistry of Materials,2019,31(3),597.
|
4 |
Fu M F, Li C T, Lu P, et al. Catalysis Science & Technology,2014,4(1),14.
|
5 |
Tang C J, Zhang H L, Dong L. Catalysis Science & Technology,2016,6(5),1248.
|
6 |
Zhang R D, Liu N, Lei Z G, et al. Chemical Reviews,2016,116(6),3658.
|
7 |
Chen C M, Cao Y, Liu S T, et al. Applied Surface Science,2020,507,145153.
|
8 |
Ran M X, Wang H, Cui W, et al. ACS Applied Materials & Interfaces,2019,11(51),47984.
|
9 |
Wang L L, Xu J Q, Zhang D Z, et al. Petrochemical Industry Technology,2019,26(5),22(in Chinese).
|
|
王罗澜,许家琪,张德志,等.石化技术,2019,26(5)22.
|
10 |
Busca G, Lietti L, Ramis G, et al. Applied Catalysis B-Environmental,1998,18(1-2),1.
|
11 |
Mohan S, Dinesha P, Kumar S. Chemical Engineering Journal,2020,384,123253.
|
12 |
Gao G, Shi J W, Fan Z, et al. Chemical Engineering Journal,2017,325,91.
|
13 |
Wu X M, Yu X L, Huang Z W, et al. Applied Catalysis B-Environmental,2020,268,118419.
|
14 |
Wang H J, Huang B C, Yu C L, et al. Applied Catalysis A-General,2019,588,117207.
|
15 |
Kang M, Kim D J, Park E D, et al. Applied Catalysis B-Environmental,2006,68(1-2),21.
|
16 |
Shan W, Song H. Catalysis Science & Technology,2015,5(9),4280.
|
17 |
Yang N Z, Guo R T, Pan W G, et al. Fuel,2016,169,87.
|
18 |
Xin Y, Li H, Zhang N, et al. ACS Catalysis,2018,8(6),4937.
|
19 |
Tian C, Zhang X W, Ren Y J, et al. Electric Power Environmental Protection,2019,35(5),16(in Chinese).
|
|
田超,张晓望,任英杰,等.电力科技与环保,2019,35(5),16.
|
20 |
Kijlstra W S, Biervliet M, Poels E K, et al. Applied Catalysis B-Environmental,1998,16(4),327.
|
21 |
Jiang B Q, Wu Z B, Liu Y, et al. Journal of Physical Chemistry C,2010,114(11),4961.
|
22 |
Yu J, Guo F, Wang Y L, et al. Applied Catalysis B-Environmental,2010,95(1-2),160.
|
23 |
Jiang L, Liu Q, Ran G, et al. Chemical Engineering Journal,2019,370,810.
|
24 |
Shi Y J, Shu H, Zhang Y H, et al. Fuel Processing Technology,2016,150,141.
|
25 |
Gao F Y, Tang X L, Yi H H, et al. Applied Surface Science,2019,466,411.
|
26 |
Ma Z, Sheng L, Wang X, et al. Advanced Materials,2019,31(42),e1903719.
|
27 |
Zhang S G, Zhang B L, Liu B, et al. RSC Advances,2017,7(42),26226.
|
28 |
Liu L J, Xu K, Su S, et al. Applied Catalysis A-General,2020,592,117413.
|
29 |
Xiong S C, Liao Y, Xiao X, et al. Catalysis Science & Technology,2015,5(4),2132.
|
30 |
Liu C, Shi J W, Gao C, et al. Applied Catalysis A-General,2016,522,54.
|
31 |
Schill L, Putluru S S R, Jensen A D, et al. Catalysis Letters,2015,145(9),1724.
|
32 |
Zhou L L, Li C T, Zhao L K, et al. Applied Surface Science,2016,389,532.
|
33 |
Ren S, Li S, Su Z, et al. Chemical Engineering Journal,2018,351,540.
|
34 |
Guo R T, Wang Q S, Pan W G, et al. Journal of Molecular Catalysis A-Chemical,2015,407,1.
|
35 |
Xu H M, Qu Z, Zong C X, et al. Applied Catalysis B-Environmental,2016,186,30.
|
36 |
Gao L, Li C T, Li S H, et al. Chemical Engineering Journal,2019,371,781.
|
37 |
Zha K, Kang L, Feng C, et al. Environmental Science-Nano,2018,5(6),1408.
|
38 |
Zhu B Z, Zi Z H, Sun Y L, et al. Catalysis Science & Technology,2019,9(12),3214.
|
39 |
Fang Q L, Zhu B Z, Sun Y L, et al. Applied Surface Science,2020,509,144901.
|
40 |
Guo R T, Wang S X, Pan W G, et al. Journal of Physical Chemistry C,2017,121(14),7881.
|
41 |
Fang D, He F, Xie J L. Journal of the Energy Institute,2019,92(2),319.
|
42 |
Chen L, Li J H, Ge M F. Chemical Engineering Journal,2011,170(2-3),531.
|
43 |
Wang P, Wang Q S, Ma X X, et al. Catalysis Communications,2015,71,84.
|
44 |
Xiong S C, Chen J J, Huang N, et al. Applied Catalysis B-Environmental,2020,267,118668.
|
45 |
Gong P, Xie J, Fang D, et al. Chinese Journal of Catalysis,2017,38(11),1925.
|
46 |
Kapteijn F, Singoredjo L, Andreini A, et al. Applied Catalysis B-Environmental,1994,3(2-3),173.
|
47 |
Tang X, Li J, Sun L, et al. Applied Catalysis B-Environmental,2010,99(1-2),156.
|
48 |
Fan Z, Wang Z, Shi J W, et al. Journal of Catalysis,2019,370,30.
|
49 |
Tian W, Yang H, Fan X, et al. Journal of Hazardous Materials,2011,188(1-3),105.
|
50 |
Han L P, Cai S X, Gao M, et al. Chemical Reviews,2019,119(19),10916.
|
51 |
Liu J, Wei Y J, Li P Z, et al. ACS Catalysis,2018,8(5),3865.
|
52 |
Liu Z, Chen C, Zhao J C, et al. Chemical Engineering Journal,2020,379,122288.
|
53 |
Zhu W J, Tang X L, Gao F Y, et al. Chemical Engineering Journal,2020,385,123797.
|
54 |
Wu G, Feng X, Zhang H, et al. Applied Surface Science,2018,427,24.
|
55 |
Zhou X, Yu F, Sun R B, et al. Applied Catalysis A-General,2020,592,117432.
|
56 |
Zhao P P, Guo M Y, Liu Q L, et al. Chemical Engineering Journal,2019,378,122100.
|
57 |
Zhang B L, Liebau M, Liu B, et al. Journal of Materials Science,2019,54(9),6943.
|
58 |
Li F X, Xie J L, Qi K, et al. Catalysis Letters,2019,149(3),788.
|
59 |
Zhao B, Ran R, Guo X, et al. Applied Catalysis A-General,2017,545,64.
|
60 |
Wang Z Y, Guo R T, Shi X, et al. Chemical Engineering Journal,2020,381,122753.
|
61 |
Yang G, Zhao H, Luo X, et al. Applied Catalysis B-Environmental,2019,245,743.
|
62 |
Wang R, Hao Z, Li Y, et al. Applied Catalysis B-Environmental,2019,258,117983.
|
63 |
Shi Y R, Tang X L, Yi H H, et al. Industrial & Engineering Chemistry Research,2019,58(9),3606.
|
64 |
Meng D, Xu Q, Jiao Y, et al. Applied Catalysis B-Environmental,2018,221,652.
|
65 |
Yang S, Qi F, Xiong S, et al. Applied Catalysis B-Environmental,2016,181,570.
|
66 |
Wang F, Shen B, Zhu S, et al. Fuel,2019,249,54.
|
67 |
Fan C, Li K Z, Peng Y, et al. Physical Chemistry Chemical Physics,2019,21(46),25880.
|
68 |
Gao F, Tang X, Yi H, et al. Chemical Engineering Journal,2017,317,20.
|
69 |
Wang J Y, Nie Z G, An Z W, et al. ACS Omega,2019,4(2),3755.
|
70 |
Hao Z, Jiao Y, Shi Q, et al. Catalysis Today,2019,327,37.
|
71 |
Yao X, Chen L, Cao J, et al. Chemical Engineering Journal,2019,369,46.
|
72 |
Zhang B L, Liebau M, Suprun W, et al. Catalysis Science & Technology,2019,9(17),4759.
|
73 |
Huang Z, Gu X, Wen W, et al. Angewandte Chemie-International Edition,2013,52(2),660.
|
74 |
Hu P, Huang Z, Gu X, et al. Environmental Science & Technology,2015,49(11),7042.
|
75 |
Fang D, He F, Liu X Q, et al. Applied Surface Science,2018,427,45.
|
76 |
Hao Z, Shen Z, Li Y, et al. Angewandte Chemie-International Edition,2019,58(19),6351.
|
77 |
Li W, Guo R T, Wang S X, et al. Fuel Processing Technology,2016,154,235.
|
78 |
Hu X, Huang L, Zhang J, et al. Journal of Materials Chemistry A,2018,6(7),2952.
|
79 |
Tang X, Li J, Wei L, et al. Chinese Journal of Catalysis,2008,29(6),531.
|
80 |
Liu J, Li X, Li R, et al. Applied Catalysis A-General,2018,549,289.
|
81 |
Zhang K, Xu L T, Niu S L, et al. Korean Journal of Chemical Enginee-ring,2017,34(6),1858.
|
82 |
Shi Y, Tang X, Yi H, et al. Industrial & Engineering Chemistry Research,2019,58(9),3606.
|
83 |
Wang X B, Duan R B, Liu W, et al. Applied Surface Science,2020,510,145517.
|
84 |
Gao C, Shi J W, Fan Z, et al. Applied Catalysis A-General,2018,564,102.
|
85 |
Gao C, Shi J W, Fan Z, et al. Fuel Processing Technology,2017,167,322.
|
86 |
Chen L, Yuan F, Li Z, et al. Chemical Engineering Journal,2018,354,393.
|
87 |
Hou X X, Chen H P, Liang Y H, et al. Catalysis Letters,2020,150(4),1041.
|
88 |
Huang J, Huang H, Jiang H, et al. Catalysis Today,2019,332,49.
|
89 |
Gao C, Xiao B, Shi J W, et al. Journal of Catalysis,2019,380,55.
|
90 |
Li W, Zhang C, Li X, et al. Chinese Journal of Catalysis,2018,39(10),1653.
|
91 |
Fan Z, Shi J W, Gao C, et al. Chemical Engineering Journal,2018,348,820.
|
92 |
Xu Q, Fang Z, Chen Y, et al. Environment Science & Technology,2020,54(4),2530.
|
93 |
Ye B, Lee M, Jeong B, et al. Catalysis Today,2019,328,300.
|
94 |
Liu L, Su S, Xu K, et al. Fuel,2019,255,115798.
|
95 |
Cheng H, Tan J, Ren Y, et al. Industrial & Engineering Chemistry Research,2019,58(36),16472.
|
96 |
Gao G, Shi J W, Liu C, et al. Applied Surface Science,2017,411,338.
|
97 |
Zhang N, Li L, Guo Y, et al. Applied Catalysis B-Environmental,2020,270,118860.
|
98 |
Liu J, Guo R T, Li M Y, et al. Fuel,2018,223,385.
|
99 |
Chen H, Xia Y, Fang R, et al. New Journal of Chemistry,2018,42(15),12845.
|
10 |
0 Sun C, Liu H, Chen W, et al. Chemical Engineering Journal,2018,347,27.
|
|
1 Peng Y, Li J, Si W, et al. Chemical Engineering Journal,2015,269,44.
|
|
2 Liu X, Yu Q, Chen H, et al. Applied Surface Science,2020,508,144694.
|
|
3 Yao L, Liu Q, Mossin S, et al. Journal of Hazardous Materials,2020,387,121704.
|
|
4 Yang J, Ren S, Zhang T, et al. Chemical Engineering Journal,2020,379,122398.
|
|
5 Wang F, Xie Z B, Liang J S, et al. Environmental Science & Technology,2019,53(12),6989.
|
|
6 Li Q, Li X, Li W, et al. Chemical Engineering Journal,2019,369,26.
|
|
7 Tang X, Li C, Yi H, et al. Chemical Engineering Journal,2018,333,467.
|
|
8 Zhou X M, Huang X Y, Xie A J, et al. Chemical Engineering Journal,2017,326,1074.
|
|
9 Yao X, Kong T, Yu S, et al. Applied Surface Science,2017,402,208.
|
11 |
0 Xie C, Yang S, Shi J, et al. Chemical Engineering Journal,2017,327,1.
|
|
1 Ettireddy P R, Ettireddy N, Mamedov S, et al. Applied Catalysis B-Environmental,2007,76(1-2),123.
|
|
2 Smirniotis P G, Pena D A, Uphade B S. Angewandte Chemie-International Edition,2001,40(13),2479.
|
|
3 Liu Y, Gu T T, Weng X L, et al. Journal of Physical Chemistry C,2012,116(31),16582.
|
|
4 Zhao X T, Mao L, Dong G J. Catalysts,2018,8(2),76.
|
|
5 Zha K W, Cai S X, Hu H, et al. Journal of Physical Chemistry C,2017,121(45),25243.
|
|
6 Xu G Y, Ma J Z, Wang L, et al. ACS Catalysis,2019,9(11),10489.
|
|
7 Singoredjo L, Korver R, Kapteijn F, et al. Applied Catalysis B-Environmental,1992,1(4),297.
|
|
8 Kapteijn F, Singoredjo L, Vandriel M, et al. Journal of Catalysis,1994,150(1),105.
|
|
9 Gao Y, Luan T, Zhang M Y, et al. Catalysts,2018,8(12),642.
|
12 |
0 Cao F, Su S, Xiang J, et al. Fuel,2015,139,232.
|
|
1 Cao F, Xiang J, Su S, et al. Fuel Processing Technology,2015,135,66.
|
|
2 Xiang J, Wang L, Cao F, et al. Chemical Engineering Journal,2016,302,570.
|
|
3 Jin R B, Liu Y, Wu Z B, et al. Chemosphere,2010,78(9),1160.
|
|
4 Pan W G, Hong J N, Guo R T, et al. Journal of Industrial and Engineering Chemistry,2014,20(4),2224.
|
|
5 Yoshikawa M, Yasutake A, Mochida I. Adsorption Science and Technology,2000,173(2),239.
|
|
6 Li P, Lu P, Zhai Y B, et al. Environmental Technology,2015,36(18),2390.
|
|
7 Cai S, Hu H, Li H, et al. Nanoscale,2016,8(6),3588.
|
|
8 Su Y, Fan B, Wang L, et al. Catalysis Today,2013,201,115.
|
|
9 Xie A, Zhou X, Huang X, et al. Journal of Industrial and Engineering Chemistry,2017,49,230.
|
13 |
0 Cheng J, Ye Q, Li C X, et al. Asia-Pacific Journal of Chemical Engineering,2020,DOI:10.1002/apj.2439.
|
|
1 Xie Z B, Song Y J, Liang J S, et al. Materials Review A: Review Papers,2017,31(6),38(in Chinese).
|
|
2 解智博,宋艳军,梁金生,等.材料导报:综述篇,2017,31(6),38.
|
|
3 Parvulescu V I, Grange P, Delmon B. Catalysis Today,1998,46(4),233.
|
|
4 Chen T, Guan B, Lin H, et al. Chinese Journal of Catalysis,2014,35(3),294.
|
|
5 Yang S J, Wang C Z, Li J H, et al. Applied Catalysis B-Environmental,2011,110,71.
|
|
6 Marban G, Fuertes A B. Catalysis Letters,2002,84(1-2),13.
|
|
7 Li X, Li Q, Zhong L, et al. The Journal of Physical Chemistry C,2019,123(41),25185.
|
|
8 Sun P, Guo R T, Liu S M, et al. Applied Catalysis A-General,2017,531,129.
|
|
|
|