Materials Reports 2020, Vol. 34 Issue (Z1): 111-115 |
INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Preparation and Properties of Light Curable Red Light Conversion Filmby Sulfhydryl-Double Bond Click Reaction |
LYU Zhanheng1, CHEN Pinhong1, XU Bing1, LUO Ying1, 2, ZHOU Wuyi1,2, DONG Xianming1,2
|
1 Biomass 3D Printing Materials Research Center, College of Materials and Energy, South China Agricultural University, Guangzhou 510642, China; 2 Guangdong Laboratory of Lingnan Modern Agricultural Science and Technology, Guangzhou 510642, China |
|
|
Abstract In this paper, the light curing resin was prepared by blending rare earth light conversion agent with sulfhydryl and double bond monomers. Two kinds of agricultural light conversion films were prepared by sulfhydryl-double bond or double bond-double bond click reaction. The structure and properties of the films were characterized by fluorescence spectrum, UV spectrum, SEM and tensile propertytest. The results show that the UV light at 353 nm can be converted into red light at 613 nm and 617 nm by using light conversion film which have been prepared by adding 0.5% rare earth light conversion into light curing resin, sulfhydryl-double bond click reaction. The film has good light transmittance and light conversion performance, and mechanical properties with tensile strength of 12.72 MPa, which has good application in agricultural greenhouses, glass greenhouses and other aspects.
|
Published: 01 July 2020
|
|
Fund:This work was financially supported by the Applied Science and Technology Research and Development Special Key Project, Program of Science and Technology Department of Guangdong (2015B020237009). |
About author:: Zhanheng Lyu, master's degree. His research directions are UV curable coating and adhesive ; Xianming Dong, Ph.D., professor, master tutor. His research directions are polymer matrix composite mate-rials and functional material. |
|
|
1 Lian S, Rong C, Yin D, et al. Journal of Physical Chemistry C,2009,113(15),6298. 2 Lian S, Qi Y, Rong C, et al. Journal of Physical Chemistry C,2010,114(15),7196. 3 Zhang H, Zhang H, Zhuang J, et al. Ceramics International,2016,42(11),13011. 4 Engelen-Eigles G, Holden G, Cohen J D, et al. Journal of Agricultural and Food Chemistry,2006,54(2),328. 5 Jia Y, Zhang X J, Hao X J, et al. Biomaterials,2014,35(10),3356. 6 Gao J Q, Jiang R Z, Wang J, et al. Chemical Engineering Journal,2011,168(3),1041. 7 Zhao W, White J M. Applied Physics Letters,2005,87(10),1. 8 Duan C J, Delsing A C A, Hintzen H T. Chemistry of Materials,2009,40(25),1010. 9 Bachmann V, Ronda C, Oeckler O, et al. Chemistry of Materials,2009,40(17),316. 10 Watanabe H, Kijima N. Journal of Alloys & Compounds,2009,475(1),434. 11 Qiu Z, Rong C, Zhou W, et al. Journal of Alloys and Compounds,2014,583,335. 12 叶孔敦,光昭,范文慧.光子学报,2001,30(4),487. 13 Wang Y T, Yu Y J, Liu W J, et al. Journal of Agricultural and Food Chemistry,2018,66(50),13295. 14 Yu Y, Xu P, Jia S et al. International Journal of Biological Macromolecules,2019,127,210. 15 Wang D, Meng X, Xu B, et al. Chemical Physics Letters,2017,677,148. 16 Fan H T, Sun We, Jiang B, et al. Chemical Engineering Journal,2016,286,128. 17 Okutsu R, Ando S, Ueda M, et al. Chemistry of Materials,2008,20(12),4017. 18 Terraza C A, Liu J G, Nakamura Y, et al. Journal of Polymer Science: Part A Polymer Chemistry,2010,46,1510. 19 Damián P Q, Alfredo S, Hierro I D, et al. Journal of Colloid and Interface Science,2007,313(2),551. |
|
|
|