MATERIALS AND SUSTAINABLE DEVEL OPMENT:ENVIRONMENT-FRIENDLY MATERIAL S AND MATERIAL S FOR ENVIRONMENTAL REMEDIATION |
|
|
|
|
|
Preparation of Three-dimensional Graphene-based Porous Carbon Materials and Their Adsorption Properties for Pollutants: a Review |
QIU Junke1,†, WANG Peng2,†, ZHANG Di1,3, SHI Lin1, ZHANG Huang3,4
|
1 Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Kunming 650500, China 2 Environmental College, Chengdu University of Technology, Chengdu 610059, China 3 Yunnan Provincial Key Laboratory of Soil Carbon Sequestration and Pollution Control, Kunming 650500, China 4 Faculty of Agriculture and Food, Kunming University of Science and Technology, Kunming 650500, China |
|
|
Abstract One-dimensional (carbon nanotubes, CNTs) and two-dimensional (graphene oxide, GO) carbon nanomaterials are widely used in the adsorption and removal of environmental pollutants. However, their practical applications have been restricted because of their agglomeration and accumulation in water. So it is imperative to search for new carbon materials. Three-dimensional graphene-based porous carbon materials (3D GBMs) have recently drawn more and more attention with the in-depth research on these carbonaceous nanomaterials in the last decade. The 3D GBMs are assembled from porous carbon materials or biomass under certain conditions. They have high porosity, large surface area, good mechanical properties and easy to recycle. Moreover, 3D GBMs have become a research hot spot in recent years due to their inherited properties of monomer materials. Due to their unique structure and performance, 3D GBMs have been applied in many fields such as environmental remediation, catalyst and energy storage, especially in the field of environmental remediation. But there are some shortcomings that can affect the performance of 3D GBMs. For example, the precursor material, size and pH may affect the adsorption performance of 3D GBMs. The preparation method needs to be selected and optimized, the damage of freeze-drying process to 3D porous structure. The further research will be needed to explore their preparation and adsorption properties. The 3D GBMs with different properties have been prepared by various methods, such as hydrothermal reduction, chemical reduction and che-mical vapor deposition. The different preparing methods were rooted in the surface functionalization of 3D GBMs. It has been found that 3D GBMs adsorbents with good removal capacity on target pollutants can be achieved by distinctive treatment methods. However, some researchers have noted that the adsorption performance of 3D GBMs can be affected by many factors. The synthesis is the main focus of research on factors affec-ting adsorption performance, among which the synthesis is the main focus of the study on the adsorption performance of 3D GBMs. This is because precursor, hydrothermal reaction and drying process can all affect the structure and performance of 3D GBMs. It is indicated that the preparation method of 3D GBMs and the factors affecting its adsorption properties need to be further studied. Understanding the effects of various pre-paration processes on the adsorption of pollutants of 3D GBMs will be helpful to promote its application in the field of environmental governance. In this article, different preparation methods of 3D GBMs are summarized. Meanwhile, the main topic is the preparation process. According to the preparation process, the influence of each preparation step on the adsorption performance of 3D GBMs is emphatically discussed. Finally, three major prospects in this paper are proposed, including dissecting the role of hydrogel in practical application, measuring surface area me-thods and existing potential environmental risks of 3D GBMs. This review will not only promote the development of 3D GBMs in the field of water treatment, but also provide theoretical guidance for its preparation and application in other fields.
|
Published: 24 June 2020
|
|
Fund:National Natural Science Foundation of China (41663014, 41303093), Yunnan Young and Middle Aged Academic and Technical Leaders Reserve Talents (2018HB008), Yunnan Ten-thousand Young Top-notch Talents Program. |
About author:: Junke Qiureceived his bachelor’s degree in environmental engineering from Lanzhou Jiaotong University in 2017. He is currently studying for a master’s degree at the Faculty of Environmental Science and Engineering, Kunming University of Science & Technology. He mainly studies the preparation and the adsorption of pollutantsof three-dimensional carbon-based nanomaterials. Peng Wanggot his Ph.D. at the Faculty of Environmental Science and Engineering, Kunming University of Science & Technology and University of Massachusetts Amherst under the supervision of Prof. Bo Pan and Prof. Baoshan Xing. His research has focused on environmental behavior of carbon nano-material and organic pollutants. Huang Zhanghas received her Ph.D. in environmental science from Kunming University of Science and Technology. Her main research area is the impact of carbon nano-materials on environmental microbial phy-siology and ecology. During her doctoral study, she majored in biotechnology in Mah Fah Luang University of Thailand, and jointly trained doctoral students for government-funded overseas study; she has visited the environmental soil chemistry laboratory at the University of Massachusetts. She is currently an associate professor at the Faculty of Agriculture and Food at Kunming University of Science and Technology. More than 20 SCI papers have been published in Fungal Diversity, Environmental Pollution and Chemosphere. |
|
|
1 Dasgupta A,Rajukumar L P,Rotella C,et al. Nano Today, 2017, 12, 116. 2 Park S,An J H,Piner R D,et al. Chemistry of Materials, 2008, 20, 6592. 3 Liu T H,Li Y H,Du Q J,et al. Colloid Surf B-Biointerfaces, 2012, 90, 197. 4 Sitko R,Turek E,Zawisza B,et al. Dalton Transactions, 2013, 42, 5682. 5 Robati D,Mirza B,Rajabi M,et al. Chemical Engineering Journal, 2016, 284, 687. 6 RomoHerrera J M,Terrones M,Terrones H,et al. Nano Letters, 2007, 7, 570. 7 Tao Y,Kong D B,Zhang C,et al. Carbon, 2014, 69, 169. 8 Sun H Y,Xu Z,Gao C. Advanced Materials, 2013, 25, 2554. 9 Chen Z,Ren W,Gao L,et al. Nature Materials, 2011, 10, 424. 10 Shen J H,Zhu Y H,Jiang H,et al. Nano Today, 2016, 11, 483. 11 Hu K W,Xie X Y,Cerruti M,et al. Langmuir, 2015, 31, 5545. 12 Hu K,Szkopek T,Cerruti M. Journal of Materials Chemistry A, 2017, 5, 23123. 13 Naficy S,Jalili R,Aboutalebi S H,et al. Materials Horizons, 2014, 1, 326. 14 Shen Z,Ye H,Zhou C,et al. Nanotechnology, 2018, 29, 13294. 15 Shen Y,Zhu X,Chen B. Journal of Materials Chemistry A, 2016, 4, 12106. 16 Wasalathilake K C,Galpaya D G D,Ayoko G A,et al. Carbon, 2018, 137, 282. 17 Jiao J,Xin X,Shen J,et al. RSC Advances, 2016, 6,94373. 18 Goldstein A P,Mickelson W,Machness A,et al. The Journal of Physical Chemistry C, 2014, 118, 28855. 19 Hu K,Xie X,Szkopek T,et al. Chemistry of Materials, 2016, 28, 1756. 20 Wu Y,Yi N,Huang L,et al. Nature Communication, 2015, 6, 6141. 21 Wan W C,Zhang F,Yu S,et al. New Journal of Chemistry, 2016, 40, 3040. 22 Yu F,Sun Y,Yang M,et al. Journal of Hazardous Materials, 2019, 374, 195. 23 Yousefi N,Wong K K W,Hosseinidoust Z,et al. Nanoscale, 2018, 10, 7171. 24 Li J,Li J,Meng H,et al. Journal of Materials Chemistry A, 2014, 2, 2934. 25 Li J,Zhao S,Zhang G,et al. Journal of Materials Chemistry A, 2015, 3, 15482. 26 Wang Z,Tang Z,Han Z,et al. RSC Advances, 2015, 5, 19838. 27 Kabiri S,Tran D N H,Altalhi T,et al. Carbon, 2014, 80, 523. 28 Kabiri R,Namazi H. Journal of Nanoparticle Research, 2014, 16, 1. 29 Shen Y,Zhu X Y,Zhu L Z,et al. Chemical Engineering Journal, 2017, 314, 336. 30 Huang Z W,Li Z J,Wu Q Y,et al. Environmental Science-Nano, 2018, 5, 2077. 31 Cao M,Du C Y,Guo H,et al. Composites Part a-Applied Science and Manufacturing, 2018, 115, 331. 32 Jiang X,Ma Y,Li J,et al. Journal of Physical Chemistry C, 2010, 114, 22462. 33 Fang Q L,Zhou X F,Deng W,et al. Chemical Engineering Journal, 2017, 308, 1001. 34 Shu D,Feng F,Han H,et al. Chemical Engineering Journal, 2017, 324, 1. 35 Pakulski D,Czepa W,Witomska S,et al. Journal of Materials Chemistry A, 2018, 6, 9384. 36 Arshad F,Selvaraj M,Zain J,et al. Separation and Purification Technology, 2019, 209, 870. 37 Gonzalez J A,Villanueva M E,Piehl L L,et al. Chemical Engineering Journal, 2015, 280, 41. 38 Wicklein B,Kocjan A,Salazar-Alvarez G,et al. Nature Nanotechnology, 2015, 10, 277. 39 Sahoo P K,Kumar N,Thiyagarajan S,et al. ACS Sustainable Chemistry & Engineering, 2018, 6, 7475. 40 Li C,Qiu L,Zhang B,et al. Advanced Materials, 2016, 28, 1510. 41 Qiu L,Liu J Z,Chang S L,et al. Nature Communications, 2012, 3, 1241. 42 Ye S B,Liu Y,Feng J C. ACS Applied Materials & Interfaces, 2017, 9, 22456. 43 Singh G,Soundarapandian S. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 79, 189. 44 Wang Y,Huang J,Chen X,et al. Carbon, 2018,137,368. 45 Xu F,Lin T,Bi H,et al. Carbon, 2017, 111, 128. 46 Lee B,Lee S,Lee M,et al. Nanoscale, 2015, 7, 6782. 47 Luo J,Lai J P,Zhang N,et al. ACS Sustainable Chemistry & Engineering, 2016, 4, 1404. 48 Garcia-Bordeje E,Victor-Roman S,Sanahuja-Parejo O,et al. Nanoscale, 2018, 10, 3526. 49 Jayanthi S,KrishnaRao Eswar N,Singh S A,et al. RSC Advances, 2016, 6, 1231. 50 Liao Y,Wang M,Chen D J. Industrial & Engineering Chemistry Research, 2018, 57, 8472. 51 Farghali A A,Bahgat M,El Rouby W M A,et al. Journal of Alloys and Compounds, 2013, 555, 193. 52 Xiao J,Lv W,Xie Z,et al. Journal of Materials Chemistry A, 2016, 4, 12126. 53 Lee S,Moon B J,Lee H J,et al. ACS Applied Materials & Interfaces, 2018, 10, 17335. 54 Kim H,Kang S O,Park S,et al. Journal of Industrial And Engineering Chemistry, 2015, 21, 1191. 55 Zhao Q,Zhu X,Chen B. Chemical Engineering Journal, 2018, 334, 1119. 56 Yang Q X,Lu R,Ren S S,et al. Chemical Engineering Journal, 2018, 348, 202. 57 Zhao Y,Sun T,Liao W,et al. ACS Applied Materials & Interfaces, 2019, 11, 22794. 58 Cheng C,Deng J,Lei B,et al. Journal of Hazardous Materials, 2013, 263, 467. 59 Awad F S,AbouZeid K M,Abou El-Maaty W M,et al. ACS Applied Materials & Interfaces, 2017, 9, 34230. 60 Tan B,Zhao H M,Zhang Y B,et al. Journal of Colloid and Interface Science, 2018, 512, 853. 61 Yu D Y,Wang Y J,Wu M H,et al. Journal of Cleaner Production, 2019, 232, 774. 62 Zhan W W,Gao L,Fu X,et al. Applied Surface Science, 2019, 467, 1122. 63 Zhang S,Liu G,Gao Y,et al. The Science of the Total Environment, 2019, 694, 133671. 64 Ma J,Yang M X,Yu F,et al. Scientific Reports, 2015, 5, 10. 65 Ma J,Sun Y R,Zhang M Z,et al. Environmental Science & Technology, 2017, 51, 12283. 66 Chen Y Q,Chen L B,Bai H,et al. Journal of Materials Chemistry A, 2013, 1, 1992. 67 Wang X B, Li J Q, Luo Y J. Acta Physico-Chimica Sinica, 2013,29(10),2079(in Chinese). 王学宝,李晋庆,罗运军. 物理化学学报, 2013, 29(10), 2079. 68 Chabot V,Higgins D,Yu A,et al. Energy & Environmental Science, 2014, 7, 1564. 69 Pikal M J,Shah S. International Journal of Pharmaceutics, 1990, 62, 165. 70 Bellows R J,King C J. Cryobiology, 1972, 9, 559. |
|
|
|