MATERIALS AND SUSTAINABLE DEVEL OPMENT:ENVIRONMENT-FRIENDLY MATERIAL S AND MATERIAL S FOR ENVIRONMENTAL REMEDIATION |
|
|
|
|
|
Progress of Superhydrophilic-Superoleophobic Materials for Oil-Water Separation |
GAO Feng1, WANG Huicai2, XU Zheng2, REN Ruili2
|
1 School of Environmental Science and Engineering, Tiangong University, Tianjin 300387, China 2 School of Chemistry and Chemical Engineering, Tiangong University, Tianjin 300387, China |
|
|
Abstract Due to the rapid development of industry and the frequent occurrence of ocean oil spill accidents, the treatment of oily waste water is a hot issue today. Therefore, there is an urgent need to prepare an efficient, low-cost, reusable high-performance oil-water separation materials. Recently, inspired by the self-cleaning of lotus leaf, super-oil-resistance of fish scales, superhydrophobic of roses, researchers have developed a large number of superoleophilic-superhydrophobic and superhydrophilic-underwater superoleophobic oil-water separation materials. However, these materials have the following disadvantages: (ⅰ) due to the lipophilic nature of the material, the material pores are easily blocked by oil pollution, and the separation efficiency decreases rapidly; (ⅱ) the density of water is generally larger than that of oil, and additional energy is required for oil-water separation. Subsequently, through the in-depth study on the chemical composition and rough structure of the material surface, scholars developed a more advanced superhydrophilic-superoleophobic material, which has the advantages of anti-oil pollution, high flux, high efficiency and reusable in the treatment of oily wastewater. In addition, because of its hydrophilicity, oil-water separation can be completed only under the action of gravity, which has important practical significance. According to the surface energy principle, superoleophobic surfaces are often superhydrophobic, so it is difficult to synthesize superhydrophilic-superoleophobic materials. Early researchers thought that there were three theories to explain the formation of superhydrophilic-superhydrophobic surfaces: (ⅰ) the superhydrophilic-superhydrophobic surface is realized by the difference of surface wetting between polar and non-polar liquids; (ⅱ) the induction of water force surface molecular rearrangement; (ⅲ) it is considered that the oil droplets are largely blocked by the surface oleophobic component, and the smaller water droplets can penetrate the oleophobic layer to reach the hydrophilic region. The proposition of these three theories has accelerated the research process of superhydrophilic-superoleophobic surfaces, but has not formed a systematic theoretical system. In recent years, researchers have found that the surface energy of materials consists of polarity and dispersion force components, so they propose that the wettability of the material surface can be adjusted by controlling these two factors. The proposed system theory accelerates the development of superhydrophilic-superoleophobic materials and provides a theoretical basis for their future development and design. In this paper, the basic theory of superwetting and the mechanism of oil/water separation are introduced. Then, we review four theories of superhydrophilic-superoleophobic material preparation. Moreover, we summarize the characteristics of superhydrophilic-superoleophobic materials and their application in oil-water separation in recent years. Finally, according to the problems in this field, solutions are proposed and the future development direction is prospected.
|
Published: 24 June 2020
|
|
About author:: Feng Gaoreceived his B.S. degree from Luoyang Institute of Science and Technology in June 2018. He is now a post-graduate student at the School of Environmental Science and Engineering of Tianjin Polytechnic University. He is under the guidance of Associate Professor Huicai Wang. At present, his main research field is the environmental functional materials. Huicai Wangreceived his B.E. degree in analytical chemistry from Changchun Institute of Technology in 2000 and received his Ph. D. degree in polymer che-mistry and physics from Zhejiang University in 2007. After two years postdoctoral research at Nankai University, he is currently a full associate professor in Tianjin Polytechnic University. His research interest are functional materials and their applications in electrochemical detection, new energy materials and environmental materials. In recent years, he has published more than 30 papers and 6 patents were authorized, including Biosensor & Bioelectronics, Sensors and Ac-tuators B: Chemical, Talanta, Electrochimica Acta, Chemical Engineering Journal, etc. |
|
|
1 Ge J, Zhao H Y, Zhu H W, et al. Advanced Materials, 2016, 28(47), 10459. 2 Ma Q, Cheng H, Fane A G, et al. Small, 2016, 12(16), 2186. 3 Gupta R K, Dunderdale G J, England M W, et al. Journal of Materials Chemistry A, 2017, 5(31),16025. 4 Wu Y, Xue S, Yang H, et al. Chemical Engineering Journal, 2017, 328,639. 5 Wu Y, Zhang T, Xu Z, et al. Journal of Materials Chemistry A, 2015, 3(5),1906. 6 Wang B, Liang W, Guo Z, et al.Chemical Society Reviews, 2015, 44(1),336. 7 Chu Z, Feng Y, Seeger S.Angewandte Chemie-International Edition, 2015, 54(8), 2328. 8 Feng L, Zhang Z, Mai Z, et al. Angewandte Chemie-International Edition, 2004, 43(15), 2012. 9 Liu M, Wang S, Wei Z, et al. Advanced Materials, 2009, 21(6),665. 10 Ge M, Cao C, Huang J, et al. Nanoscale Horizons, 2018, 3(3),235. 11 Guselnikova O, Elashnikov R, Postnikov P, et al. ACS Applied Materials & Interfaces, 2018, 10(43),37461. 12 Song H M, Chen C, Shui X X, et al. Journal of Membrane Science, 2019, 573,126. 13 Yang J, Yin L, Tang H, et al. Chemical Engineering Journal, 2015, 268,245. 14 He K, Duan H, Chen G Y, et al. ACS Nano, 2015, 9(9), 9188. 15 Zhang W, Zhu Y, Liu X, et al. Angewandte Chemie-International Edition, 2014, 53(3),856. 16 Young T. Philosophical Transactions of the Royal Society of London, 1805, 95, 65. 17 Wenzel R N. Journal of Physical & Colloid Chemistry, 1948, 53,1466. 18 Cassie A B D, Baxter S. Transactions of the Fraday Society, 1944, 40, 546. 19 Li J, Jing Z, Zha F, et al. ACS Applied Materials & Interfaces, 2014, 6(11),8868. 20 Zhang Y, Chen Y, Shi L, et al. Journal of Materials Chemistry, 2012, 22(3),799. 21 Yang J, Zhang Z, Xu X, et al. Journal of Materials Chemistry, 2012, 22(7),2834. 22 Yang J, Song H, Yan X, et al. Cellulose, 2014, 21(3),1851. 23 Kim B S, Harriott P. Journal of Colloid and Interface Science, 1987, 115, 1. 24 Pan S, Guo R, Xu W. Aiche Journal, 2014, 60(8), 2752. 25 Saito T, Tsushima Y, Sawada H. Colloid and Polymer Science, 2014, 293(1), 65. 26 Okada A, Nikaido T, Ikeda M, et al. Dental Materials Journal,2008, 27(4), 565. 27 Kota A K, Kwon G, Choi W, et al. Nature Communications, 2012, 3, 1. 28 Zhou H, Wang H, Yang W, et al. RSC Advances, 2018, 8(47),26939. 29 Xu Z, Zhao Y, Wang H, et al. Angewandte Chemie-International Edition, 2015, 54(15), 4527. 30 Brown P S, Bhushan B. Scientific Reports, 2015, 5, 1. 31 Tang H, Fu Y, Yang C, et al.RSC Advances, 2016, 6(94), 91301. 32 Owens D K, Wendt R C. Journal of Applied Polymer Science, 1969, 13(8), 1741. 33 Fowkes F M. Industrial & Engineering Chemistry, 1964, 56(12), 40. 34 Pan Y, Huang S, Li F, et al. Journal of Materials Chemistry A, 2018, 6(31), 15057. 35 Yong J, Chen F, Yang Q, et al. Chemical Society Reviews, 2017, 46(14), 4168. 36 Liu T L, Kim C J. Science, 2014, 346(6213), 1096. 37 Yong J, Chen F, Yang Q, et al. Chemical Communication, 2015, 51(48), 9813. 38 Xiong L, Guo W, Alameda B M, et al. ACS Omega, 2018, 3(8), 10278. 39 Li F, Wang Z, Huang S, et al. Advanced Functional Materials, 2018, 28(20), 1706867. 40 Zhou W. The preparation and properties of oil/water separation materials with special wettability. Master’s Thesis, South China University of Technology, China, 2017(in Chinese). 周伟. 基于特殊润湿性的油水分离材料的制备和性能研究.硕士学位论文,华南理工大学, 2017. |
|
|
|