核壳纳米复合润滑材料研究进展

doi:10.11896/cldb.18070217

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2215KB)
Export: BibTeX | EndNote (RIS)

Abstract Lubricating materials, as a crucial matter to improve the service life of the mechanical system, have become an important part of the development of high-end equipment technology. For a long time, it has been an important research direction in the field of tribological materials to explore high-performance solid lubricant with low friction and high wear resistance. Core-shell composite particles with the properties of lubricating and wear-resisting can be prepared as high-performance solid lubricants by the chemical directional combination of the functional nanomaterials, which is of great significance to improve the tribological properties of materials.
The structure and dispersion of soft and hard phase particles are the key means to improve the tribological properties of lubricating materials. Due to phase-separation and non-uniform dispersion, the traditional mechanical-mixing method cannot meet the service requirements of low friction and wear-resistant materials under harsh working conditions. Because of the stable interfacial bonding force and regulatable surface chemical state between the composite systems, the core-shell nanomaterials can realize the long life, low friction and operational reliability of lubricating materials under harsh working conditions, and have promising prospects in the field of lubrication materials.
The core-shell nanomaterials have the advantage of presenting greater flexibility in structural regulation and morphological distribution. The interfacial interaction of the core-shell structure provides an essential basis for the controllable preparation of the core-shell particle and the formation of core-shell complex with stable structure and uniform dispersion. In terms of structural regulation, the research on the composition, structure evolution, scale, morphology and dispersion of core-shell nanomaterials has been carried out in recent years. In the preparation methods, self-assembly method, the sol-gel method, microemulsion polymerization, hard and soft template method and other technical means have different advantages and disadvantages for improving the thermodynamic stability and interfacial interaction of core-shell particles. In the matter of tribological mechanism, a large number of studies have revealed the dynamic evolution laws of core-shell particles in the process of friction. The tribological mechanism of core-shell nanoparticles has been clarified from multiple perspectives through the film lubrication mechanism, the permeable layer concept, the third body anti-wear mechanism, the rolling-bearing action and the self-consumption mechanism. In the application of lubricating materials, various functional core-shell nanoparticles play an important role in improving the properties of lubricant functional additives, polymer coa-tings and polymer composites. The results show that the core-shell nanoparticles with characteristic structural advantages are of great significance for improving the tribological properties and bearing capacity of lubricating materials.
Based on the current research situation at home and abroad, this paper systematically reviews the common types, preparation methods, structure regulation mechanism, friction and wear mechanism of the core-shell composites, as well as the application in lubricating materials. The future research direction of core-shell nanomaterials in the lubrication and the failure mechanism, accurate compounding and performance optimization, and the self-healing mechanism of core-shell structure is also outlooked.

Key words： core/shell structure lubricating materials structure control friction transfer

Published: 15 August 2019

CLC number:

TB33

About author:: Yawen Yang received her B.S. degree in chemistry from Northwest Normal University in 2017. She is currently pursuing a master at Lanzhou Institute of Chemical Physics of the Chinese Academy of Sciences under the supervision of Prof.Honggang Wang recievied his Ph.D. in 2008 from Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences.Junfang Ren received her Ph.D. degree in physical chemistry from Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Yawen
	WANG Na
	REN Junfang
	GAO Gui
	CHEN Shengsheng
	WANG Honggang

Cite this article:

YANG Yawen,WANG Na,REN Junfang, et al. Research Progress of Composite Lubricating Material with Core-Shell Structure[J]. Materials Reports, 2019, 33(19): 3242-3250.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18070217 OR http://www.mater-rep.com/EN/Y2019/V33/I19/3242

Patrice M, Sylvie B C, Luc D J, et al. Physics Reports,2014,543(3),163.2 Qi J, Chen J, Li G, et al. Energy & Environmental Science,2012,5(10),8937.3 Chaudhuri R G,Paria S. Chemical Reviews,2012,112,2373.4 Addanki S,Nedumaran D. Optics Communications,2017,394,62.5 Li F, Gao X, Wang R, et al. Sensors and Actuators B: Chemical,2017,248,812.6 Zhao L, Sun C, Tian G, et al. Journal of Colloid and Interface Science,2017,502,1.7 Kalska-Szostko B, Klekotka U,Satuł a D. Applied Surface Science,2017,396,1855.8 Han W J, Piao S H, Choi H J, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects,2017,524,79.9 Qi X, Hu Q, Xu J, et al. Materials Science and Engineering: B,2016,211,53.10 Wang Y, Zhang W, Luo C, et al. Synthetic Metals,2016,220,347.11 Wang C, Xu T,Wang C A. Ceramics International,2016,42(7),9178.12 Chen Y, Qin J, Wang Y, et al. Journal of Nanoparticle Research,2015,17(9),363.13 Chen Y, Chen A,Qin J. Journal of Porous Materials,2017,24(6),1667.14 Wu Z. Preparation and application of core/shell nanocomposite materials. Master’s Thesis, Anhui University of Science and Technology, China,2015(in Chinese).吴正.核壳纳米复合材料的制备及应用.硕士学位论文,安徽理工大学,2015.15 Shchukin D G, Lamaka S V, Yasakau K A, et al. Journal of Physical Chemistry C,2008,112,958.16 Ohmae N,Liu J. Nanotribology, Elsevier, Germany,2016.17 Burris D L, Boesl B, Bourne G R, et al. Macromolecular Materials and Engineering,2007,292(4),387.18 Chen B, Gu K, Fang J, et al. Applied Surface Science,2015,353,326.19 Sparnacci K, Antonioli D, Deregibus S, et al. Macromolecules,2009,42,3518.20 Chen L J, Zhao Y B, Wu Z S, et al. Lubrication Engineering,2005(1),26(in Chinese).陈利娟,赵彦保,吴志申,等.润滑与密封,2005(1),26.21 Li B, Wang X, Liu W, et al. Tribology Letters,2006,22(1),79.22 Ji X B, Chen Y X, Du Q L, et al. Lubrication engineering,2015,40(4),58(in Chinese).纪献兵,陈银霞,杜庆丽.润滑与密封,2015,40(4),58.23 Chen Y, Zhou S, Yang H, et al. Journal of Sol-Gel Science and Technology,2006,37(1),39.24 Liu X F. Journal of Henan University of Science and Technology: Natural Science,2012(33),4(in Chinese).刘晓飞.河南科技大学学报:自然科学版,2012(33),4.25 Antonioli D, Deregibus S, Panzarasa G, et al. Polymer International,2012,61,1294.26 Giani E, Sparnacci K,Laus M. Macromolecules,2003,36,4360.27 Chen Z, Li J, Cui X, et al. Colloid and Polymer Science,2005,284(2),218.28 Santra S, Tapec R, Theodoropoulou N, et al. Langmuir,2001,17,2900.29 Ding H, Zhang Y, Wang S, et al. Chemistry of Materials,2012,24(23),4572.30 Hu Y, Liu Y, Xie X, et al. Journal of Colloid and Interface Science,2018,529,547.31 Sertchook H,Avnir D. Chemistry of Materials, 2003,15,1690.32 Dong A G, Wang Y J, Tang Y, et al. Chemical Communication,2002,350.33 Yang Z, Niu Z, Lu Y, et al. Angewandte Chemie,2003,115(17),1987.34 Sun Y, Zhou B, Gao P, et al. Journal of Alloys and Compounds,2010,490(1-2),48.35 Cui X, Zhong S, Zhang H, et al. Polymers for Advanced Technologies,2007,18(7),544.36 Hayes R, Ahmed A, Edge T, et al. Journal of Chromatography A,2014,1357,36.37 Perera V, Liu H, Wang Z Q, et al. Chemistry of Materials,2013,25(23),4703.38 Lee D K, Song Y, Tran V T, et al. Journal of Colloid and Interface Science,2017,499,54.39 Li T, Moon J, Morrone A A, et al. Langmuir,1999,15,4328.40 Chunyan Song, Wujiang Yu, Bin Zhao, et al. Catalysis Communications,2009,10(5),650.41 Yang J, Lind J U,Trogler W C. Chemistry of Materials,2008,20(9),2875.42 M. Yu, J. Lin, Fang J. Chemistry of Materials,2005,17,1783.43 Hwa Y, Kim W S, Yu B C, et al. The Journal of Physical Chemistry C,2013,117(14),7013.44 Sara T L, Mohammad M, Mehdi M, et al. Energy,2015,85,635.45 Soulé S, Allouche J, Dupin J C, et al. Microporous and Mesoporous Materials,2013,171,72.46 Liu P. Colloids and Surfaces A: Physicochemical and Engineering Aspects,2006,291(1-3),155.47 Chatterjee A,Mishra S. Particuology,2013,11,760.48 Ghows N, Entezari M H. Ultrason Sonochem,2011,18(2),629.49 Ethayaraja M, Ravikumar C, Muthukumaran D, et al. Journal of Physical Chemistry C,2007,111,3246.50 Almana N, Phivilay S P, Laveille P, et al. Journal of Catalysis,2016,340,368.51 Saboor F H, Khodadadi A A, Mortazavi Y, et al. Sensors and Actuators B: Chemical,2017,238,1070.52 Chatterjee A, Khobragade P, Mishra S, et al. Particuology,2017,30,118.53 Ohmori M, Matijević E. Journal of Colloid And Interface Science,1993,160(2),288.54 Cao J, Wang B, Han D, et al. Materials Letters,2014,135,71.55 Korhonen J T, Hiekkataipale P, Malm J, et al. ACS Nano,2011,5(3),1967.56 Sekiya E H, Barua P, Saito K, et al. Journal of Non-Crystalline Solids,2008,354(42-44),4737.57 Tai Y, Chen H, Xu C, et al. Materials Letters,2017,188,80.58 Song C, Kim Y, Ju B, et al. Materials & Design,2016,89,1278.59 Cash Brandon M, Wang L,Benicewicz Brian C. Journal of Polymer Science Part A: Polymer Chemistry,2012,50(13),2533.60 Kotsuchibashi Y, Faghihnejad A, Zeng H, et al. Polymer Chemistry,2013,4(4),1038.61 Zhang Z, Zhang J, Wang Y, et al. Talanta,2017,167,428.62 Kim H,Lah M S. Dalton Transactions,2017,46(19),6146.63 Qian H, Tang J, Hossain M S A, et al. Nanoscale,2017,9(42),16264.64 Zhao T, Liu X, Li Y, et al. Journal of Colloid and Interface Science,2017,490,436.65 Wu X,Xu D. Advanced Materials,2010,22(13),1516.66 Sasidharan M, Zenibana H, Nandi M, et al. Dalton Transactions,2013,42(37),13381.67 Li Y,Wu X. Ionics,2018,24(5),1329.68 Chiñas-Castillo F,Spikes H A. Journal of Tribology,2003,125(3),552.69 Masood M T, Heredia-Guerrero J A, Ceseracciu L, et al. Chemical Engineering Journal,2017,322,10.70 Cui X, Zhong S, Xu J, et al. Colloid and Polymer Science,2007,285(8),935.71 Luis M, Liz-Marza′n, Michael Giersig, et al. Langmuir 1996,12,4329.72 Dabbousi B O, Rodriguez-Viejo J, Mikulec F V, et al. Journal of Physical Chemistry B,1997,101,9463.73 Zhang D, Kou K, Gao C Y, et al. Journal of Polymer Research,2012,19(5),9873.74 Feng L, He L, Ma Y, et al. Materials Chemistry and Physics,2009,116(1),158.75 Wu F, Zhang B, Yang W, et al. Polymer,2014,55(22),5760.76 Sarikhani K, Jeddi K, Thompson R B, et al. Langmuir,2015,31(20),5571.77 Luis M, Liz-Marza, Michael Giersig P M. Langmuir,1996,12,4329.78 Kato K, Uchida E, Kang E T, et al. Progress in Polymer Science,2003,28,209.79 Reeves C J, Menezes P L. The International Journal of Advanced Manufacturing Technology,2017,89(9),3475.80 Pitenis A, Junk C, Sawyer G, et al. Tribology Letters,2015,57(1),4.81 Zhang B, Yu B S, Xu Y, et al. Tribology,2011,31(2),194(in Chinese).张博,徐滨士,许一,等.摩擦学学报,2011,31(2),194.82 Wu Y Y, Tsui W C, Liu T C. Wear,2007,262(7-8),819.83 Wang Y, Wan Z, Lu L, et al. Tribology International,2018,124,10.84 Rapoport L, Feldman Y, Homyonfer M, et al. Wear,1999,225-229,975.85 Li J L, Xiong D S,Huo M F. Wear,2008,265(3),566.86 Liu X, Zhang L. Lubes & Fuels,2006(16),9(in Chinese).刘新,张立.润滑油与燃料,2006(16),9.87 Zeng Q, Yu F, Dong G. Surface and Interface Analysis,2013,45(8),1283.88 Scharf T W, Goeke R S, Kotula P G, et al. ACS Applied Materials and Interfaces,2013,5(22),11762.89 Krick B A, Ewin J J, Mccumiskey E J. Tribology Transactions,2014,57,1058.90 Haung H D. Tribological properties of flake graphite and inorganic fullerenes molybdenum disulfide as lubricating oil additives. Master’s Thesis, Zhejiang University, China,2006(in Chinese).黄海栋.片状纳米石墨和无机类富勒烯二硫化钼作为润滑油添加剂的摩擦学性能.硕士学位论文,浙江大学,2006.91 Gosvami N N, Bares J A, Mangolini F, et al. Science,2015,348(6230),102.92 Stefanov M, Enyashin A N, Heine T, et al. The Journal of Physical Chemistry C,2008,112(46),17764.93 Chen Y, Qian C,Miao N. Thin Solid Films,2015,579,57.94 Zuiderduin W C J, Westzaan C, Huétink J, et al. Polymer,2003,44(1),261.95 Krick B A, Ewin J J, Edwardj J M. Tribology Transactions,2014,57,1058.96 Menezes P L, Kishore, Kailas S V, et al. Wear,2011,271,2213.97 Zhao Y B, Zhou J F, Zhang Z J, et al. Tribology,2001,21,73(in Chinese).赵彦保,周静芳,张治军,等.摩擦学学报,2001,21,73.98 Li C F, Luo X M, Hou B, et al. Tribology,2008,28(2),133(in Chinese).李春风,罗新民,侯滨,等.摩擦学学报,2008,28(2),133.99 Che J F. Surface modification and dispersion of nano-oxide and its application in polymer friction materials. Ph.D. Thesis, Nanjing University of Science and Technology,China,2005(in Chinese).车剑飞.纳米氧化物表面改性与分散技术及其在高分子摩擦材料中的应用.博士学位论文,南京理工大学,2005.100 Mitchell K, Neville A, Walker G M, et al. Tribology International,2018,124,124.101 Wang H, Yan L, Liu D, et al. Tribology International,2015,83,139.102 Liu Y, Liu J. Construction and Building Materials,2016,122,90.103 Rathnayake R M N M, Mantilaka M M M G P G, Hara M, et al. Applied Surface Science,2017,410,445.104 Ma R, Fang L, Luo Z, et al. Applied Surface Science,2014,314,341.105 Picchio M, Passeggi M, Barandiaran M, et al. Progress in Organic Coatings,2016,101,587.106 Wang Y,Bhushan B. ACS Applied Materials and Interfaces,2015,7(1),743.107 Yuan R, Wu S, Yu P, et al. ACS Applied Materials and Interfaces,2016,8(19),12481.108 Verma J, Nigam S, Sinha S, et al. Vacuum,2018,153,24.109 Zhuang L, Fu Q G,Yu X. Journal of the European Ceramic Society,2018,38(7),2808.110 Wu Z, Zhai W, He Y, et al. Progress in Organic Coatings,2014,77(11),1841.111 Liu Z, Dai M, Wang C, et al. Progress in Organic Coatings,2016,101,350.112 Lin L Y,Kim D E. Tribology International,2011,44(12),1926.113 Ben H J, Ji C Q, Cheng F, et al. Industrial & Engineering Chemistry Research,2014,53(44),17362.114 Guo Y, Wang M, Zhang H, et al. Journal of Applied Polymer Science,2007,107(4),2671.115 Rybak A,Gaska K. Journal of Materials Science,2015,50(23),7779.116 Liu S, Fan X,He C. Composites Science and Technology,2016,125,132.117 Li H, Li S, Li Z, et al. Langmuir,2017,33(49),14149.118 Yoonessi M, Lerch B, Peck J, et al. ACS Applied Materials & Interfaces,2015,7(31),16932.