Materials Reports 2019, Vol. 33 Issue (z1): 485-487 |
POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
Analysis of Tensile Properties of High Elongation Flexible Ablative Resistant Coatings |
BAI Qianglai, FU Quan, PAN Chenggang, WANG Linde, MU Zhaoyang
|
Xi’an Institute of Modern Control Technology, Xi’an 710065 |
|
|
Abstract The temperature of solid rocket motor gas can be as high as 3 000 K, which puts extremely stringent requirements on the thermal protection of the engine. In this work, the tensile properties of a high elongation flexible ablation resistant coating under different curing times, different curing temperatures, different curing agent contents and different stretching rates were studied. It was found that the curing time and curing agent content have little effect on the tensile properties of the coating. But the curing temperature was increased from 80 ℃ to 150 ℃, under the curing time of 6 h, the tensile strength increased by 90%; and when the loading rate was increased from 5 mm/min to 10 mm/min, the tensile strength was increases by 3.5%, the elongation was actually reduced by 55%. Therefore, the curing temperature and loading rate should be important factors influencing the tensile properties of the coating.
|
Published: 05 July 2019
|
|
About author:: Qianglai Bai received his M.S. degree in April 2016 from Northwestern Polytechnical University in enginee-ring. In the same year, he joined the Xi’an Institute of Modern Control Technology and has been working on thermal protective coatings and composite materials. |
|
|
1 武晓松, 陈军, 王栋. 固体火箭发动机原理,兵器工业出版社,2011. 2 刘冬欢, 张憬, 尚新春. 工程材料学报,2015,37(2),243. 3 王浩泽, 李江, 秦飞, 等. 固体火箭技术,2015,38(2),185. 4 Nieto A, Kumar A, Lahiri D,et al. Carbon,2014,67(2),398. 5 韩珺礼, 蒙上阳, 杨军辉, 等. 计算机辅助工程,2013,22,160. 6 张斌, 刘宇, 王长辉, 等. 固体火箭技术,2011,34(2),189. 7 李志永, 郑日恒, 李立翰, 等. 推进技术,2013,34(1),76. 8 周会会, 宋鹏, 廖红星, 等. 材料导报:综述篇,2016,30(4),81. 9 张权. 装备制造技术,2013(11),274. 10 马天信, 李晓奋, 周一博. 航天制造技术,2015(4),1. 11 肖军, 章凯军, 李晓升, 等.工程实践,2013(5),74. 12 程宇, 王素娟. 硅酸盐通报,2015,34(8),2387. 13 丁儒雅, 徐国跃, 张伟钢, 等.兵器材料科学与工程,2012,35(6),4. 14 张宝华, 叶俊丹, 陈斌. 塑料工业,2009,37(9),64. |
|
|
|