Materials Reports 2019, Vol. 33 Issue (z1): 191-194 |
INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Research Progress and Prospect of Laser Cladding Technology for Preparation of Amorphous Coatings |
JIANG Zhipeng1,2, CHEN Xiaoming1,3,4, ZHAO Jian1,4, ZHANG Lei1,2,4, FU Li1,4, LIU Wei1,4
|
1 Standard & Quality Control Research Institute, Hangzhou 310012 2 Key Laboratory of Surface Engineering of Equipments for Hydraulic Engineering of Zhejiang Province, Hangzhou 310012 3 State key Laboratory for Advanced Metals and Materials University of Science & Technology Beijing, Beijing 100083 4 Hydraulic Machinery and Remanufacturing Technology Engineering Laboratory of Zhejiang Province, Hangzhou 310012 |
|
|
Abstract The characteristics and properties of amorphous alloys as well as the limitations of preparing bulk amorphous alloys were briefly introduced in this paper. Compared with the thermal spraying, electroless plating and electroplating process, the preparation of Fe-based, Zr-based and Ni-based amorphous coatings by laser cladding techniques on metal substrates were mainly reviewed. The effects of laser cladding process parameters (such as laser power density and scanning rates) and micro-alloying elements type and content on the morphologies, microstructure and properties of the amorphous coatings were systematically discussed. Finally, the development trend of laser cladding technology to prepare amorphous coating should be focused on composition design, process optimization, the regulation of structure and properties and basic theoretical research of the laser cladding amorphous coatings.
|
Published: 05 July 2019
|
|
About author:: Zhipeng Jiang graduated from Beijing University of Science and Technology, major research direction is material surface coating modification technology.Xiaoming Chen senior engineer, research direction is wear-resistant corrosion-resistant antifouling coating material and preparation process. |
|
|
1 惠希东, 陈国良. 块体非晶合金, 化学工业出版社,2007. 2 Cahn R W. Nature,1976,260,285. 3 Wang W H, Dong C, Shek C H. Materials Science and Engineering: R,2004,44(2),45. 4 Jun W K, Willens R H, Duwez P. Nature,1960,187(4740),869. 5 Scully J R, Gebert A, Payer J H. Journal of Materials Research,2011,22(2),302. 6 Schuh C A, Hufnagel T C, Ramamurty U. Acta Materialia,2007,55(12),4067. 7 Li X Y, Akiyama E, Habazaki H, et al. Corrosion Science,1999,41(9),1849. 8 Greer A L, Cheng Y Q, Ma E. Materials Science and Engineering: R,2013,74(4),71. 9 Trexler M M, Thanhani N N. Progress in Materials Science,2010,55(8),759. 10 Weng F, Chen C, Yu H. Materials & Design,2014,58,412. 11 Liu J, Yu H, Chen C, et al. Optics and Lasers in Engineering,2017,93,195. 12 陈建敏, 郭纯, 周健松. 中国有色金属学报,2012,22(9),2171. 13 冯淑容, 汤海波, 张述泉, 等. 中国有色金属学报,2012(7),1667. 14 马海波, 张维平. 稀有金属材料与工程,2010,39(12),2189. 15 张晓伟, 刘洪喜, 蒋业华, 等. 稀有金属材料与工程,2012,41(1),178. 16 Quazi M M, Fazal M A, Haseeb A S M A, et al. Journal of Rare Earths,2016,34(6),549. 17 董刚, 严彪, 邓琦林, 等. 稀有金属材料与工程,2011,40(6),973. 18 Gargarella P, Almeida A, Vilar R, et al. Surface & Coatings Technology,2014,240(3),336. 19 Cheng J B, Wang Z H, Xu B S. Journal of Thermal Spray Technology,2013,22(4),471. 20 Nabialek M. Journal of Alloys and Compounds,2015,642,98. 21 刘繁茂, 张慧燕, 张涛. 材料工程,2014(10),6. 22 Yao H H, Zhou Z, Wang Y M, et al. Journal of Thermal Spray Technology,2016,26(3),1. 23 Jones H. Materials Science & Engineering,1969,5(1),1. 24 胡汉起, 郑启光, 李梅萍, 等. 北京科技大学学报,1994(2),131. 25 Wu X, Hong Y. Surface & Coatings Technology,2001,141(2),141. 26 Matthews D T A, Ocelik V, Branagan D, et al. Surface & Coatings Technology,2009,203(13),1833. 27 Wang S L, Zhang Z Y, Gong Y B, et al. Journal of Alloys & Compounds,2017,728,1116. 28 Zhou S, Xu Y, Liao B, et al. Optics & Laser Technology,2018,103,8. 29 Lu Y, Huang G, Wang Y, et al. Materials Letters,2017,210,46. 30 Kobayashi A, Yano S , Kimura H, et al. Materials Science & Enginee-ring B,2008,148(1),110. 31 Yugeswaran S, Kobayashi A . Vacuum,2014,110,177. 32 Racek O. Office of Scientific & Technical Information Technical Reports,2008,40,121. 33 Borisova A L, Mitz I V, Paton E O, et al. In: Proceedings of the 1st International Thermal Spray Conference: Thermal Spray-Surface engieering via Applied Research. Montreal, Canada,2000,pp.705. 34 包石磊. 新型镍基非晶合金的制备与性能研究. 博士学位论文, 兰州理工大学,2008. 35 Choi Y H, Xu D, Johnson W L. Applied Physics Letters,2003,82,1030. 36 杨建明, 吕剑, 安忠维. 工业催化,2000,8(5),18. 37 Pang S J, Shek C H, Asami K, et al. Journal of Alloys & Compounds,2007,434(434),240. 38 Yoshioka H, Asami K, Kawashima A, et al. Cheminform,1987,27,981. 39 李刚, 侯俊英, 刘丽, 等. 表面技术,2010,39(4),15. 40 李刚, 贾孟东, 况军, 等. 腐蚀科学与防护技术,2011,23(1),9. 41 李刚, 刘丽, 侯俊英, 等. 激光技术,2011,35(2),185. 42 李瑞峰, 时中星, 李铸国, 等. 强激光与粒子束,2014,26(3),1. 43 宋利君, 孟惠民. 功能材料,2010,41(2),318. 44 王文昌. 化学镀Ni-Sn-P合金的研究. 硕士学位论文, 南京理工大学,2012. 45 Hui X D, Liu S N, Pang S J, et al. Scripta Materialia,2010,63,239. 46 Hui X D, Fang H Z, Chen G L, et al. Applied Physics Letters,2008,92(20),23. 47 Hui X D, Fang H Z, Chen G L, et al. Acta Materialia,2009,57,376. 48 Liu X J, Chen G L, Hui X D, et al. Applied Physics Letters,2008,93,1. 49 Jia G Z, Wang W X, et al. Materials Science Forum,2013,745,746. 50 李刚, 夏延秋, 王彦芳, 等. 摩擦学学报,2002,22(5),343. 51 黄开金, 林鑫, 陈池, 等. 中国激光,2007,34(4),549. 52 Ye M X, Bae M H, Shin Y C, et al. In:Aeromat 25 Conference and Exposition American Society for Metals. America,2012. 53 达则晓丽, 朱彦彦, 李铸国. 中国表面工程,2012,25(3),52. 54 Wang Y, Lu Q, Xiao L, et al. Rare Metal Materials & Engineering,2014,43(2),274. 55 Wang C, Chen Y, Li T, et al. Applied Surface Science,2009,256,1609. 56 柳吉华, 王存山. 应用激光,2011,31(5),400. 57 董丹阳, 张滨, 陈岁元, 等. 东北大学学报(自然科学版),2008,29(6),849. 58 李嘉宁. 激光熔覆技术及应用, 化学工业出版社,2015. 59 Zhang P, Yan H, Yao C, et al. Surface & Coatings Technology,2011,206(6),1229. 60 朱庆军, 邹增大, 王新洪, 等. 焊接学报,2007,28(9),91. 61 Wang Y, Li G, Shi Z, et al. Journal of Alloys & Compounds,2014,610(3),713. 62 王震, 闫岸如, 王智勇. 金属功能材料,2015,1(1),17. 63 Wang C S, Li T, Yao B, et al. Materials Science Forum,2010,654(656),1872. 64 Gao Y L, Jie M, Zhang H B. International Journal of Minerals Metallurgy and Materials,2013,20(6),568. 65 Yan S, Hong Z, Chun X U. Heat Treatment of Metals,2010,35,26. 66 党元晓. 激光熔覆温度场和应力场的数值模拟研究.硕士学位论文,新疆大学,2016. 67 黄延禄, 邹德宁, 梁工英,等.稀有金属材料与工程,2003(5),330. 68 李德英, 张坚, 赵龙志, 等. 焊接学报,2017,38(5),35. |
|
|
|