7×19构型NiTi形状记忆合金绞线超弹性试验研究

doi:10.11896/cldb.23070029

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (11221KB)
Export: BibTeX | EndNote (RIS)

Abstract This study aimed to investigate the cyclic tensile behavior of 7×19 NiTi shape memory alloy (SMA) cables with a single wire diameter of 1.0 mm, in order to optimize their superelastic properties for engineering applications. A comprehensive analysis was conducted to assess the effects of various factors, including heat treatment strategy, strain amplitude, number of cycles, pre-training, and loading rate on the mechanical parameters of SMA cables. The obtained mechanical parameters, such as residual strain, energy dissipation, equivalent viscous damping ratio, strength, and stiffness were examined under different conditions. The results showed that the annealing temperature of 400 ℃ for 10 minutes produced the highest phase transformation stress and recovery rate for the 7×19 SMA cable configuration, which deteriorated with prolonged annealing time. The deformation and stress development of the single wire inside the SMA cable are more uneven, and the hysteresis curve has no obvious phase transformation platform. The initial elastic modulus and ultimate stress of SMA cables under constant amplitude tension are relatively small, while the degradation of phase transition platform height, recovery rate and equivalent viscous damping ratio is obvious. Moreover, the pre-training method can reduce the functional damage of the SMA cables, significantly reduce the residual deformation, and improve the recovery ability. The loading rate has a great influence on the martensitic stress and the tangent modulus of the yield platform of the SMA cables. When the loading rate exceeds 1×10^-2 s^-1, the hysteresis curve is not sensitive to the change of the loading rate. The results provide experimental data support for the application of 7×19 section SMA cables.

Key words： 7×19 section superelastic shape memory alloy cable superelasticity heat treatment mechanical property cyclic loading

Published: 10 November 2024 Online: 2024-11-11

CLC number:

TG139.6

Fund:National Natural Science Foundation of China (52078411,52478205), Shaanxi Province Innovation Ability Support Program-Youth Science and Technology New Star Project (2022KJXX-47), and Shaanxi Provincial Department of Education Youth Innovation Team Research Project (22JP041).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHOU Yuhao
	LIAN Ming
	WANG Yankai
	SU Mingzhou

Cite this article:

ZHOU Yuhao,LIAN Ming,WANG Yankai, et al. Experimental Investigation on Superelastic Behaviors of NiTi Shape Memory Alloy Cables with 7×19 Sections[J]. Materials Reports, 2024, 38(21): 23070029-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23070029 OR http://www.mater-rep.com/EN/Y2024/V38/I21/23070029

1 Tyber J, McCormick J, Gall K, et al. Journal of Engineering Mechanics, 2007, 133(9), 1009.
2 McCormick J, Tyber J, DesRoches R, et al. Journal of Engineering Mechanics, 2007, 133(9), 1019.
3 Jani J M, Leary M, Subic A, et al. Materials & Design, 2014, 56, 1078.
4 Chang W S, Araki Y. In:Proceedings of the Institution of Civil Engineers-Civil Engineering. Thomas Telford Ltd, 2016, pp. 87.
5 Zuo X B,Li A Q,Ni L F,et al. China Civil Engineering Journal, 2004, 37(12), 10 (in Chinese).
左晓宝, 李爱群, 倪立峰, 等.土木工程学报,2004,37(12), 10.
6 Qian H, Li J B, Li H N, et al. Journal of Vibration and Shock, 2013, 32(24), 89 (in Chinese).
钱辉, 李静斌, 李宏男, 等. 振动与冲击, 2013, 32(24), 89.
7 Liu M M, Li H N, Fu X. Engineering Mechanics, 2018, 35(6), 52 (in Chinese).
刘明明, 李宏男, 付兴. 工程力学, 2018, 35(6), 52.
8 Han J P, Zhang Q C. Engineering Mechanics, 2021, 38(1), 195 (in Chinese).
韩建平,章全才. 工程力学, 2021, 38(1), 195.
9 Hu S J, Gu Q, Jiang G Q, et al. Engineering Mechanics, 2021, 38(1), 109(in Chinese).
胡淑军,顾琦,姜国青, 等. 工程力学, 2021, 38(1), 109.
10 Ren W J, Wang L Q, Jia J S, et al. Journal of Functional Materials, 2013, 44(2), 258 (in Chinese).
任文杰, 王利强, 贾俊森, 等. 功能材料, 2013, 44(2), 258.
11 Fang C, Yam M C H, Ma H, et al. Materials and Structures, 2015, 48(4), 1013.
12 Kang L P, Qian H, Guo Y C, et al. Materials, 2020, 13(17), 3729.
13 Qian H, Li Z A, Pei J Z, et al. Engineering Mechanics, 2020, 37(11), 135 (in Chinese).
钱辉,李宗翱,裴金召, 等. 工程力学, 2020, 37(11), 135.
14 Reedlunn B, Daly S, Shaw J. International Journal of Solids and Structures, 2013, 50(20-21), 3009.
15 Biggs D B, Shaw J A. In: Behavior and Mechanics of Multifunctional Materials and Composites. SPIE, 2016, pp, 79.
16 Ozbulut O E, Daghash S, Sherif M M. Journal of Materials in Civil Engineering, 2016, 28(4), 04015176.
17 Wang W, Fang C, Yang X, et al. Engineering Structures, 2017, 153, 503.
18 Liu Y, Wang H, Qiu C, et al. Materials, 2019, 12(6), 997.
19 Fang C, Zhou X, Osofero A I, et al. Smart Materials and Structures, 2016, 25(10), 105013.
20 Wang B, Zhu S, Chen K, et al. Engineering Structures, 2020, 218, 110836.
21 DesRoches R, McCormick J, Delemont M. Journal of Structural Enginee-ring, 2004, 130(1), 38.
22 Fang C, Zheng Y, Chen J, et al. Engineering Structures, 2019, 183, 533.
23 Fang Cheng, Wang Wei, Chen Yiyi. Journal of Building Structures, 2019, 40(7), 1 (in Chinese).
方成, 王伟, 陈以一. 建筑结构学报, 2019, 40(7), 1.
24 Cui D, Zhang W, Wang Z Y. World Earthquake Engineering, 2018, 34(3), 94 (in Chinese).
崔迪, 张威, 王圳颖. 世界地震工程, 2018, 34(3), 94.
25 Mas B, Biggs D, Vieito I, et al. Construction and Building Materials, 2017, 148, 307.
26 Chen J, Fang C, Wang W, et al. Journal of Constructional Steel Research, 2020, 175, 106318.
27 Fang C, Zheng Y, Chen J, et al. Engineering Structures, 2019, 183, 533.
28 Shi F, Zhou Y, Ozbulut O E, et al. Engineering Structures, 2021, 228, 111611.
29 Shi F, Ozbulut O E, Li Z, et al. Journal of Building Engineering, 2022, 52, 104340.
30 Shi Y, Qian H, Kang L, et al. Smart Materials and Structures, 2021, 30(9), 095019.
31 Evirgen A, Karaman I, Pons J, et al. Materials Science and Engineering: A, 2016, 655, 193.
32 Lagoudas, Dimitris C. Shape memory alloys: modeling and engineering applications, Springer Science & Business Media, 2008.
33 Eggeler G, Hornbogen E, Yawny A, et al. Materials Science and Engineering A, 2004, 378(1-2), 24.
34 Miyazaki S, Imai T, Igo Y, et al. Metallurgical Transactions A, 1986, 17, 115.
35 Frotscher M, Wu S, Simon T, et al. Advanced Engineering Materials, 2011, 13(5), B181.
36 Qian H, Wei D, Shi Y, et al. Soil Dynamics and Earthquake Enginee-ring, 2023, 168, 107850.