单脉冲电沉积Ni-纳米TiC-氧化石墨烯复合镀层结构及磨损性能

doi:10.11896/cldb.22060057

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (62055KB)
Export: BibTeX | EndNote (RIS)

Abstract In this study, a new type of Ni-based antifriction and wearable ternary composite coating was prepared on the surface of Q235 steel by single pulse electrodeposition technology. Firstly, the best GO addition was determined by studying the effect of the concentration of graphene oxide (GO) on the morphology, plating rate and hardness of Ni-nano TiC-based composite coating. Then, the structure of ternary composite coating was characterized by X-ray diffraction (XRD), Raman spectroscopy (Raman) and X-ray photoelectron spectroscopy (XPS). Finally, the hardness and wear resistance of ternary composite coating were studied by comparing with Ni-nano TiC composite coating. The results show that the optimal mass concentration of GO in the plating solution is 200 mg/L. At this time, the surface of Ni-nano TiC-GO composite coating is uniform and dense, and the roughness value R_a is 3.087 μm. XRD and Raman spectra results show that nano TiC and GO are successfully incorporated into Ni-based coatings. The hardness of Ni-nano TiC-GO composite coating is 726.3HV, about 1.5 times that of Ni-nano TiC compo-site coating (463.8HV). The average friction coefficient of Ni-nano TiC-GO composite coating is 0.108, which has better friction reduction and wear resistance than Ni-nano TiC composite coating (0.285).

Key words： simple-pulse graphene oxide nickel-based composite coating microstructure wear resistance

Published: Online: 2024-06-25

CLC number:

TG174

Fund:National Natural Science Foundation of China (51805235), and the Science and Technology Research Project of Education Department of Liaoning Province, China (JYTMS20230790).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	REN Xin
	WANG Haoxin
	SUN Tao
	WANG Gang
	MENG Chao
	QIU Xingwu

Cite this article:

REN Xin,WANG Haoxin,SUN Tao, et al. Microstructure and Wear Resistance of Ni-nano TiC-GO Composite Coatings Based on Single Pulsed Electrodeposition[J]. Materials Reports, 2024, 38(11): 22060057-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22060057 OR http://www.mater-rep.com/EN/Y2024/V38/I11/22060057

1 Qi Q, Wang L J, Liu Y, et al. Journal of Alloys and Compounds, 2018, 757, 273.
2 Tan N, Liu J, Lou L Y, et al. Royal Society Open Science, 2021, 8(3), 202089.
3 Li H Z, Zhao G Z, Li Y J, et al. Protection of Metals and Physical Chemistry of Surfaces, 2021, 57(3), 535.
4 Li C Y, Xia F F, Ma C Y, et al. Journal of Materials Engineering and Performance, 2021, 30(8), 6336.
5 Jin H, Ji R J, Dong T C, et al. Surface & Coatings Technology, 2021, 421, 127368.
6 Shahzad K, Radwan A B, Fayyaz O, et al. Ceramics International, 2021, 47(13), 19123.
7 Morteza T, Omid Y, Mahmood F N. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2019, 233(1), 94.
8 Cheng Q, Yao Z J, Zhang F, et al. Materials Research Express, 2020, 6(12), 126434.
9 He Y, Wang S C, Sun W T, et al. Coatings, 2019, 9(2), 148.
10 Liu J S, Shi Y. Surface & Coatings Technology, 2021, 412, 127044.
11 Kotkowiak M, Piasecki A, Kulka M. Ceramics International, 2019, 45(14), 17103.
12 Ying L X, Liu Y, Liu G N, et al. Rare Metal Materials and Engineering, 2015, 44(1), 28.
13 Yang M S, Liu X B, Fan J W, et al. Applied Surface Science, 2012, 258(8), 3757.
14 Cai B, Tan Y F, He L, et al. Transactions of Nonferrous Metals Society of China, 2013, 23(2), 392.
15 Sahoo C K, Masanta M. Journal of Materials Processing Technology, 2016, 243, 229.
16 Wang J Y, Peng C, Tang J Z, et al. Journal of Alloys and Compounds, 2018, 737, 515.
17 Freshteh A E, Azadi M, Tavakoli H. Surface Engineering and Applied Electrochemistry, 2020, 56(2), 171.
18 Mahidashti Z, Aliofkhazraei M, Lotfi N. Transactions of the Indian Institute of Metals, 2018, 71(2), 257.
19 Zhang W W, Li B S, Ji C C. Ceramics International, 2019, 45(11), 14015.
20 Yan C Q, Namachivayam K, Li H, et al. Ceramics International, 2020, 46(10), 15714.
21 Uysal M, Algul H, Duru E, et al. Surface & Coatings Technology, 2021, 410, 126942.
22 Jin H C, Gobinda G, Dhani R D, et al. Acta Metallurgica Sinica, 2020, 33(4), 573.
23 Qiu C, Liu D M, Jin K, et al. Diamond & Related Materials, 2017, 76, 150.
24 Wu S Q, Ren X, Chu X, et al. Materials Reports, 2020, 34(24), 24080 (in Chinese).
吴双全, 任鑫, 初鑫, 等. 材料导报, 2020, 34(24), 24080.
25 Ren X, Jiang R K, Chu X, et al. Transactions of Materials and Heat Treatment, 2021, 42(1), 165 (in Chinese).
任鑫, 江仁康, 初鑫, 等. 材料热处理学报, 2021, 42(1), 165.
26 Wang H X, Mao X Y, Shen T, et al. Materials Engineering, 2017, 45(1), 52 (in Chinese).
王红星, 毛向阳, 沈彤, 等. 材料工程, 2017, 45(1), 52.
27 Liu W M, Chen G G, Wang C M, et al. Materials Reports, 2016, 30(11), 7 (in Chinese).
刘委明, 陈国贵, 王从敏, 等. 材料导报, 2016, 30(11), 7.
28 Elhadji M S, Oluwatobi S O, Abhijit S, et al. Materials Letters, 2016, 171, 137.
29 Akhavan O. Carbon, 2010, 48(2), 509.
30 Sivasakthi P, Ramesh B, Maruthai C. Materials Science & Engineering C, 2016, 58, 782.
31 Zhou X W, Shen Y F. Surface & Coatings Technology, 2013, 235, 433.
32 Abdel W, Asim J, Yahia I S, et al. Superlattices and Microstructures, 2016, 94, 108.
33 Guo H X, An J H, Liang J. Surface Technology, 2020, 49(3), 224 (in Chinese).
郭惠霞, 安景花, 梁军. 表面技术, 2020, 49(3), 224.
34 Diana B, Ali E, Alexander V Z, et al. Diamond & Related Materials, 2015, 54, 91.
35 Chen L, Wang L Q, Zeng Z X, et al. Surface & Coatings Technology, 2006, 201(3-4), 599.
36 Praveen B M, Venkatesha T V. Applied Surface Science, 2008, 254(8), 2418.