Materials Reports 2022, Vol. 36 Issue (Z1): 21120173-5 |
INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
The Influence of Different Kinds of Retarders on the Coagulation Time and Hardening Properties of Hemihydrate Phosphogypsum |
WANG Jiahao1, SHEN Yu2, LIU Juanhong1,3,4, LUO Kun1
|
1 School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083,China 2 The Third Engineering Co., Ltd., CCCC Second Highway Engineering Co., Ltd., Xi'an 710016, China 3 Beijing Key Laboratory of Urban Underground Space Engineering, University of Science and Technology Beijing, Beijing 100083, China 4 Key Laboratory of Ministry of Education for Efficient Mining and Safety of Metal Mines, University of Science and Technology Beijing, Beijing 100083,China |
|
|
Abstract In order to solve the problem of too fast setting time of hemihydrate phosphogypsum, five typical retarders-citric acid, tartaric acid, bone glue, sodium gluconate and sodium tripolyphosphate were selected to explore the effects of different amount of retarder on the water consumption of standard consistency, setting time, compressive strength and hydration heat release of hemihydrate phosphogypsum paste. The results showed that the five retarders can prolong the initial setting time and final setting time of hemihydrate phosphogypsum and reduce the water consumption of standard consistency of hemihydrate phosphogypsum. In the case of 0.1% low content, tartaric acid and sodium gluconate have the best retarding effect, and the initial setting time and final setting time are more than 6 times that of the blank sample without retarder, and the strength loss rate is less than 20% to 30% in 3 d and 7 d. Among them, sodium gluconate can reduce the peak heat release rate 22.1%, and the occurrence time of the peak rate is more than doubled. Considering comprehensively, tartaric acid and sodium gluconate can prolong the setting time of hemihydrate phosphogypsum, reduce the hydration heat release rate, and the strength loss rate of hardened body is lower.
|
Published: 05 June 2022
Online: 2022-06-08
|
|
Fund:National Natural Science Foundation of China(51834001) and the Fundamental Research Funds for the Central Universities(FRF-BD-20-01A,FRF-BD-20-01B). |
|
|
1 杨志强,陈晴,郭清春,等. 硅酸盐通报,2016,35(9),2860. 2 李建雄,张庆安,高伟. 化肥设计,2018,56(3),58. 3 Attallah M F, Metwally S S, Moussa S I, et al. Microchemical Journal, 2019,146,789. 4 Pérez-Moreno S, Gázquez M J, Pérez-López R, et al. Chemosphere, 2018,211,775. 5 焦叶宏,杨林,李贺军,等. 建筑材料学报,2019,22(3),401. 6 陈迁好,蒋正武. 建筑材料学报,2020,23(1),200. 7 曹晓梅,牟晓芳,钱中秋,等. 材料导报,2013,27(S2),298. 8 丁益,方有春,任启芳,等. 材料导报,2016,30(6),121. 9 韩伟明,李建锡,段正洋,等. 硅酸盐通报,2016,35(6),1958. 10 Singh N B, Pandey S P. Inorganic Materials, 2011, 1990,21. 11 彭家惠,张建新,陈明凤,等. 硅酸盐学报,2008(7),896. 12 黄滔,彭小芹,王淑萍,等. 建筑材料学报,2018,21(4),608. 13 马保国,肖君,夏永芳,等. 功能材料,2013,44(10),1476. 14 马保国,孙仲达,苏英,等. 硅酸盐通报,2017,36(12),3978. 15 马保国,胡鹏辉,苏英,等. 硅酸盐通报,2019,38(10),3047. |
|
|
|