面向低温环境的聚合物摩擦学性能及其改性研究进展

doi:10.11896/cldb.20070001

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4151KB)
Export: BibTeX | EndNote (RIS)

Abstract Polymers and composite materials have the advantages of good mechanical properties, low friction coefficient, and strong wear resistance. They are often used in the manufacture of key basic components of friction pairs, such as sealing rings, gears, bearing cages, rotor blades, pistons, etc. So far there has been very little research on polymer tribology for low temperature conditions, and the main work has focused on normal temperature and high temperature conditions. The theory of tribology applications and related preparation and modification processes of polymers and composites for low temperature environments is not complete. The tribological damage failure mechanism of polymers in extreme service environments is not yet fully understood. In addition, although polymer materials have many excellent properties, their shortcomings such as low surface hardness, large temperature effect, and easy deformation are also obvious. These shortcomings limit their application in the field of low temperature tribology. In order to solve this problem, the researchers carried out modification research on the polymer through filling fillers, surface treatment and other methods and have achieved certain results.
At present, due to the continuous development of cutting-edge technologies such as aerospace, the tribological properties of polymers in va-cuum and low temperature environments have attracted widespread attention. Polymer self-lubricating materials such as polytetrafluoroethylene, polyimide, and polyether ether ketone have been used in spacecraft to make lubricating and sealing components. The researchersmodified the polymer with graphite, grapheme, molybdenum disulfide, aramid fiber, glass fiber, etc. And prepared PTFE/graphite, PTFE /Aramid fiber, PTFE/UHMWPE with low friction coefficient and high wear resistance under low temperature environment and other composite materials which have promoted the application of polymers in the field of low temperature tribology.
This review systematically analyzes the influence of temperature, environmental medium, sliding speed, load, sliding direction and other factors on polymer tribological properties under low temperature environment,and briefly summarizes the polymer tribological modification for low temperature environment. In order to promote the further development of tribology applications and related research in low temperature environment of polymers.

Key words： polymer materials tribological properties modified friction and wear

Published: Online: 2022-02-10

CLC number:

TB324

Fund:National Natural Science Foundation of China (51965019, 52061012), the Natural Science Foundation of Jiangxi Province (20192BAB206026, 20212ACB214003).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIONG Guangyao
	LI Shengxin
	LI Bo
	SHEN Mingxue

Cite this article:

XIONG Guangyao,LI Shengxin,LI Bo, et al. Research Progress of Polymer Tribological Properties and Modification in Low Temperature Environment[J]. Materials Reports, 2022, 36(3): 20070001-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20070001 OR http://www.mater-rep.com/EN/Y2022/V36/I3/20070001

1 He C X. Materials Science and Technology,2003,11(4), 445(in Chinese).
何春霞. 材料科学与工艺, 2003,11(4), 445.
2 Sun R L, Sun S W, Guo L X,et al. Aerospace Materials and Technology,1999(1), 17(in Chinese).
孙荣禄,孙树文,郭立新,等. 宇航材料工艺,1999(1), 17.
3 Yin J J, Feng Z P, Liu L L, et al.Ship & Boat, 2017, 28(2), 10(in Chinese).
殷俊俊,冯正平,刘乐乐,等. 船舶, 2017, 28(2), 10.
4 Kuleba V I, Ostrovskaya Y L, Pustovalov V V.Tribology International, 2001, 34(4), 237.
5 Gradt T, Börner H, Schneider T.Tribology International, 2001, 34(4), 225.
6 Hübner W, Gradt T, Schneider T, et al.Wear, 1998, 216(2), 150.
7 Zhang C C,Li F. Information of Surface Engineering, 2009, 9(2), 7(in Chinese).
张长春,李峰. 表面工程资讯, 2009, 9(2), 7.
8 Song X Q, Liu X Q. Surface Engineering and Remanufacturing, 2018, 18(3), 56(in Chinese).
宋喜群,刘晓倩.表面工程与再制造,2018, 18(3), 56.
9 Liu Weimin. My country's first in-situ analysis system for spatial tribology was successfully developed. Instrument Information Network,2020.
刘维民.我国首台空间摩擦学原位分析系统研制成功,仪器信息网, 2020.
10 Yang K, Wang X, Wang J P, et al. Journal of Harbin Institute of Technology,2020, 52(1), 85(in Chinese).
杨琨,王霞,王进平,等.哈尔滨工业大学学报, 2020, 52(1), 85.
11 Ma L, He C G,Zhao X J, et al. Tribology, 2016, 36(1), 92(in Chinese).
马蕾,何成刚,赵相吉,等.摩擦学学报, 2016, 36(1), 92.
12 Fu S Y.Polymers at Cryogenic Temperatures,2013,16(5),296.
13 Wang Q H, Zheng F, Wang T M.Cryogenics,2016, 75, 19.
14 Song F, Yang Z, Zhao G, et al.Journal of Applied Polymer Science, 2017, 134(39), 45358.
15 Anita P, Piotr K.Tribologia,2018,2(8), 107.
16 Yamaguchi Y, Kennedy F E, Blanchet T A . Journal of Tribology, 1991, 113(2),414.
17 Gradt T, Schneider T, Hubner W, et al. International Journal of Hydrogen Energy, 1998,23(5), 397.
18 Liu H, Ji H, Wang X.Cryogenics, 2013, 58,1.
19 Xue C F, Yu M, Yao J L, et al. Journal of Shanghai Jiaotong University, 2018, 52(5), 604(in Chinese).
薛超凡,于敏,姚举禄,等.上海交通大学学报,2018, 52(5), 604.
20 Mccook N L, Burris D L, Dickrell P L, et al.Tribology Letters, 2005, 20(2), 109.
21 Babuska T F, Pitenis A A, Jones M R, et al.Tribology Letters, 2016, 63(2), 15.
22 Wan G, Wu Q, Yang K.Tribology International, 2020, 149, 105570.
23 Burton J C, Taborek P, Rutledge J E.Tribology Letters, 2006, 23(2), 131.
24 Stead I M N, Eckold D G, Clarke H, et al. Wear, 2019, s430,25.
25 Theiler G, Hubner W, Gradt T, et al. Tribology International, 2002,35,449.
26 Theiler G, Gradt T.Cryogenics, 2018, 93, 1.
27 Wang Q, Wang Y, Wang H, et al.Journal of Macromolecular Science, Part B, 2017, 56(7), 493.
28 Burris D L.Tribology Transactions, 2008, 51(1), 92.
29 Sheng C G, Lee J H, Narravula V, et al.Cold Regions Science and Technology,2012, 71, 95.
30 Oyamada T, Ono M, Miura H, et al.Tribology Transactions, 2013, 56(4), 607.
31 Zheng F, Lv M, Wang Q, et al. Polymers for Advanced Technologies, 2015, 26(8), 988.
32 Samyn P, Schoukens G.Polymer Composites, 2009, 30(11), 1631.
33 Theiler G, Gradt T.Wear, 2010, 269(3-4), 278.
34 Barry P R, Chiu P Y, Perry S S, et al.Tribology Letters, 2015, 58(50), 2.
35 Petrova N N, Portnyagina V V, Mukhin V V, et al.Materials Science Forum,2019, 945, 412.
36 Shi L W, Wang Z J, Sun X B, et al. Bearing, 2015(12), 31(in Chinese).
时连卫,王子君,孙小波,等. 轴承, 2015(12), 31.
37 Wang L, Jia X, Cui L, et al.Tribology Transactions, 2008, 52(1), 59.
38 Masami I, Haruho M, Tatsuya M, et al.Surface and Coatings Technology, 2011, 206(5), 999.
39 Lan P, Gheisari R, Meyer J L, et al.Wear, 2018, 398, 47.