金属表面复合防腐膜的制备及机理研究进展

doi:10.11896/cldb.20060287

Abstract
Figure/Table
References
Related Citation (5)

Download:

Full Text ( PDF ) (6524KB)
Export: BibTeX | EndNote (RIS)

Abstract Metal corrosion has given rise to huge economic loss and harm to social development. Corrosion science has been playing an increasingly important role in the national economy with the development of industry and science and technology. Hence, the corrosion and protection of metallic materials are closely associated with the sustainable development of economy and national welfare and the people's livelihood. It is well known that the beginning of metal corrosion process mainly takes place at the interface between metal and environment. Hence, it is possible to slow down metal corrosion or prevent it by preparing anti-corrosion film on metal surface, so that anti-corrosion is no longer beyond reach.
The preparation of anticorrosion film on metal surface can largely block the direct contact between metal and the environment, thus the occurrence and progress of chemical corrosion and electrochemical corrosion can slow down. Nonetheless, sole anticorrosion film would not be able to play a long-term and effective protective role because of incomplete structure, a presence of gap, high risk of falling off and other shortcomings. At present, the preparation of high performance and multifunctional composite films on metal surface has become a research hotspot in corrosion and protection. Considering corrosion, general anticorrosive membrane can be divided into inorganic membrane, organic membrane and inorganic - organic hybrid membrane. Recently, scholars at home and abroad have carried out extensive research in this field and made a great many achievements. In the preparation method, difference shows in film formation technology, suitable metals, characteristics of the film. They have their own advantages and disadvantages; upon performances contrast, it can be found that hydrophobicity, antimicrobial property and antiseptic property are not independent of each other, but they have a certain relationship with each other. Hydrophobicity and antimicrobial properties could enhance the effect of anti-corrosion performance. Given that high temperature and humidity environment inside the aircraft are prone to triggering off bacteria and corrosion, it is very important to prepare multifunctional membranes with hydrophobic, antibacterial and antiseptic properties.
In this paper, the research progress of composite film on metal surface has been summarized. The preparation method, properties and mechanism of the composite membrane were introduced respectively. Also, the problems and prospects of metal surface composite films in the future were analyzed. They are expected to provide reference for high performance and environmental protection composite films on metal surface.

Key words： metal corrosion composite anticorrosive film PEO corrosion inhibitor

Published: Online: 2022-02-10

CLC number:	TG146
	TG178.2

Fund:Experimental Technology Innovation Fund Project of Civil Aviation University of China (2021CXJJ08).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DU Juan
	LI Fang
	SONG Haipeng
	WEI Ziming
	LI Xiangyun

Cite this article:

DU Juan,LI Fang,SONG Haipeng, et al. Research Progress on Preparation and Mechanism of Composite Anticorrosive Film on Metal Surface[J]. Materials Reports, 2022, 36(3): 20060287-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20060287 OR http://www.mater-rep.com/EN/Y2022/V36/I3/20060287

1 Zhang N, Xiao F, Cao Y Q, et al. Packaging Engineering, 2020, 41(3),138 (in Chinese).
张宁, 肖峰, 曹源清, 等. 包装工程, 2020,41(3),138.
2 Zhao L B, Li Q N, Hong Y P, et al. Hot Working Technology, 2016, 45(12),15 (in Chinese).
赵隆滨, 黎清宁, 洪雅萍, 等. 热加工工艺, 2016,45(12),15.
3 Luo H H,Cai Q Z,Wei B K,et al. Acta Physico-Chimica Sinica, 2008(3),481 (in Chinese).
骆海贺, 蔡启舟, 魏伯康, 等. 物理化学学报, 2008(3),481.
4 Tang Y R, Pan L H, Chang Y, et al. Surface Technology, 2015,44(2),48 (in Chinese).
唐艳茹, 潘利华, 常宇, 等. 表面技术, 2015,44(2),48.
5 Huang W X. SiCp /AZ91 magnesium-based composite micro-arc oxidation process and coating corrosion resistance. Master's Thesis, Harbin Institute of Technology, China ,2008 (in Chinese).
黄文现. SiCp /AZ91 镁基复合材料微弧氧化工艺与涂层耐腐蚀性能研究. 硕士学位论文, 哈尔滨工业大学,2008.
6 Xu J L, Xiao Q F, Lai T, et al. Materials Reports, 2018,32(2),249 (in Chinese).
徐吉林,肖奇飞,赖涛, 等. 材料导报, 2018,32(2),249.
7 Wang J P, Yu Z X, He J. Journal of Functional Materials, 1999(3),100 (in Chinese).
王金平, 俞志欣, 何捷. 功能材料,1999(3),100.
8 Li L J, Ou X T, Chen D X, et al. Corrosion Science and Protection Technology, 2009,21(2),197 (in Chinese).
李凌杰, 欧孝通, 陈德贤, 等. 腐蚀科学与防护技术,2009,21(2),197.
9 Lin Bilan, Lu Jintang. Transactions of Nonferrous Metals Society of China,2014,(8),2722.
10 Fu Junsong, Zhang Mengjie, Jin Lin, et al. Applied Surface Science,2019,470,543.
11 Wang J P, Cheng F Y, Du X F, et al. Journal of Inorganic Materials, 2018,33(6),617 (in Chinese).
王景平, 成方媛, 杜显锋, 等. 无机材料学报,2018,33(6),617.
12 Li S Y, Dong Y H, Zhou Q, et al. Corrosion & Protection, 2015,36(8),748 (in Chinese).
李思仪, 董玉华, 周琼, 等. 腐蚀与防护,2015,36(8),748.
13 Wang S C, Wang H C, Xie H H, et al. New Chemical Materials,2019,47(7),82 (in Chinese).
王世成, 王宏超, 谢泓辉, 等. 化工新型材料,2019,47(7),82.
14 Wang A P, Zhou A H. Periodical of Ocean University of China, 2020,50(3),81 (in Chinese).
王爱萍, 周爱华. 中国海洋大学学报(自然科学版),2020,50(3),81.
15 Jiang F, Zhao Y, Hu J M. Surface Technology, 2020,49(2),109 (in Chinese).
蒋帆, 赵越, 胡吉明. 表面技术,2020,49(2),109.
16 Zhou T, Li H, Cheng L, et al. Journal of Xuzhou Institute of Technology(Natural Sciences Edition), 2019,34(2),1 (in Chinese).
周涛, 李欢, 程琳, 等. 徐州工程学院学报(自然科学版),2019,34(2),1.
17 Jin D Y, Zhang X W, Fan H, et al. Fine Chemicals, 2020,37(2),412 (in Chinese).
金大钺, 张先伟, 范宏, 等. 精细化工,2020,37(2),412.
18 Wen Q C. Study on the environmental adaptability of micro-nano bacte-riostatic anticorrosive coating. Master's Thesis, Beijing University of Chemical Technology, China, 2018 (in Chinese).
温庆昶. 微纳米抑菌防腐涂层的环境适应性研究. 硕士学位论文, 北京化工大学,2018.
19 Wu Y N. Exploration of antibacterial and anticorrosive properties of composite coatings based on cuprous oxide. Master's Thesis, Huazhong University of Science and Technology, China, 2016 (in Chinese).
吴亚楠.基于氧化亚铜的复合涂层的抗菌防腐性能探究. 硕士学位论文, 华中科技大学,2016.
20 Liu J L. Preparation and antibacterial properties of in-situ grafted quaternary ammonium salt antibacterial materials. Master's Thesis, Southwest Jiaotong University, China, 2017 (in Chinese).
刘嘉玲.基于原位接枝季铵盐抗菌材料的制备及其抗菌性能研究. 硕士学位论文, 西南交通大学,2017.
21 Li S, Zhang S H, Yang B, et al. China Plastics, 2018,32(12),1 (in Chinese).
李爽, 张双红, 杨波,等. 中国塑料,2018,32(12),1.
22 Hara M, Ichino R, Okido M,et al. Surface & Coatings Technology,2003,169,679.
23 Xue S Q, Ma Y Z , Wu Y F, et al. Speciality Petrochemicals, 2018, 35(3),50 (in Chinese).
薛守庆, 马远忠, 吴义芳, 等. 精细石油化工,2018,35(3),50.
24 Feng H L, Wei Z B, Xia C F, et al. Journal of Hubei Engineering University, 2019,39(6),21 (in Chinese).
封海浪, 韦子彬, 夏彩芬, 等. 湖北工程学院学报,2019,39(6),21.
25 Gong L, Lu Y P, Yu Y. Surface Technology, 2004(6),18 (in Chinese).
宫丽, 卢燕平, 于洋. 表面技术,2004(6),18.
26 Ni A Q, Zhu K K, Wang J H. Acta Materiae Compositae Sinica, 2019, 36(11),2579 (in Chinese).
倪爱清, 朱坤坤, 王继辉. 复合材料学报,2019,36(11),2579.
27 Wang X, Shi S C, Chen Y X, et al. Materials Reports, 2016,30(S2),335 (in Chinese).
王霞, 时圣闯, 陈玉祥,等.材料导报,2016,30(S2),335.
28 Fan Y D, Guo H L, Zhang J X. In: 2018 National Academic Conference on Corrosion Electrochemistry and Test Methods. Beijing, 2018,pp.244 (in Chinese).
樊亚东, 郭华龙, 张俊喜. 2018年全国腐蚀电化学及测试方法学术交流会. 北京, 2018, pp.244.
29 Wang H F, Que Y S, Wu C C, et al. Plating & Finishing, 2015,37(7),15 (in Chinese).
汪海风, 阙永生, 吴春春, 等. 电镀与精饰,2015,37(7),15.
30 Wang H, Miao C L, Chen G R. Chemical Research and Application, 2016,28(2),239 (in Chinese).
王辉, 苗超林, 陈改荣. 化学研究与应用, 2016,28(2),239.
31 Liu Y, Zhou W, Liao J H, et al. New Chemical Materials, 2019,47(11),9 (in Chinese).
刘艺, 周玮, 缪佳辉, 等. 化工新型材料,2019,47(11),9.
32 Zhao S J, Zhang W, Deng H N, et al. Acta Physico-Chimica Sinica, 2016,32(3),723 (in Chinese).
赵胜君, 张伟, 邓会宁, 等. 物理化学学报,2016,32(3),723.
33 Wang Y J, Zhang X F, Zhang K, et al. Coating and Protection, 2016,37(9),21 (in Chinese).
王一建, 张雪芬, 张凯, 等. 涂料技术与文摘,2016,37(9),21.
34 Huang R, Shao X, Zhang K Y, et al. Paint & Coatings Industry, 2017,47(12),30 (in Chinese).
黄芮, 邵雄, 张恺宇, 等. 涂料工业, 2017,47(12),30.
35 Zhou X S, Lei Y Y, Zhang X Y, et al. Ordnance Material Science and Engineering, 2013,36(3),63 (in Chinese).
周小淞, 雷源源, 张晓燕, 等. 兵器材料科学与工程,2013,36(3),63.
36 Li Xijin, Liu Xingyang, Luan Benli. Applied Surface Science,2011,257(21),9135.
37 Alex L, Michael Z, Aleksey K, et al. Applied Surface Science,2013,264,743.
38 Dmitry V M, Sergey L S, Igor M I, et al. Applied Surface Science,2020,503,144062.
39 Wang H, Ren F, Huang C B, et al. In: The 38th Chinese Society of Chemical Engineering Inorganic Acid and Alkali Salt Academic and Technology Exchange Conference and 2018 Annual Conference Paper Collection. Hebei, 2018 (in Chinese).
王海, 任峰, 黄春波,等. 第38届中国化工学会无机酸碱盐学术与技术交流大会. 河北, 2018.
40 Tuan S H, M H H. Progress in Organic Coatings,2020,140,105478.
41 Li Yufeng, Li Jiyu, Gao Xiao hui, et al. Applied Surface Science,2018, 462,362.
42 Chen X, Wen SF, Feng T, Yuan X. Progress in Organic Coatings,2020,139, 105374.
43 Nezamdoust S, Seifzadeh D. Transactions of Nonferrous Metals Society of China,2017,27(2),352.
44 Cao X Y, Du J, Yang Z M, et al. Journal of Aeronautical Materials, 2019,39(6),20 (in Chinese).
曹翔宇, 杜娟, 杨梓铭, 等. 航空材料学报,2019,39(6),20.
45 Du J, Wei Z M, Zheng S J, et al. Journal of Materials Engineering, 2020,48(2),22 (in Chinese).
杜娟, 魏子明, 郑世辑, 等. 材料工程,2020,48(2),22.
46 Cao Z Y, Huo S J, Wang L, et al. Plating & Finishing, 2016,38(9),1 (in Chinese).
曹志源, 霍胜娟, 王雷, 等. 电镀与精饰,2016,38(9),1.
47 Xu B H, Zhu G S, Huang C, et al. Anhui Chemical Industry, 2018, 44(5),26 (in Chinese).
许宝华, 朱桂生, 黄诚, 等. 安徽化工,2018,44(5),26.
48 Yang Wenji, Li Tianqi, et al. Electro chimica Acta, 2016, 220,245.
49 Wang Yabin, Liu Zhong, et al. Applied Surface, 2015, 356(30),191.
50 Zhu Hongzheng, Yue Longfei, Zhuang Chen, et al. Surface & Coatings Technology,2016,304,76.
51 Liu Qi, Ma Ruina, Du An, et al. Applied Surface Science,2019,480,646.
52 Gazala R, Hema B, et al. Progress in Organic Coatings, 2014, 77(9),1484.
53 Peng F Z, Li C Q, et al. Jiangxi Chemical Industry, 2020(1),84 (in Chinese).
彭富忠,李长全,等. 江西化工,2020(1),84.
54 Conradi M , Kocijan A , et al. Applied Surface Science, 2014, 292,432.
55 Ko ChiLiang, Kuo YuLin, Guo JhaoYu, et al. Japanese Journal of Applied Physics,2018,58(SA) ,SAAD03.
56 Wang Z H, Zhu R, Liu B, et al. China Coatings, 2019,34(5),9 (in Chinese).
王梓恒, 朱冉, 刘斌, 等. 中国涂料,2019,34(5),9.
57 Abdolreza Mirmohseni, Maryam Azizi, Mir Saeed Seyed Dorraji. Progress in Organic Coatings,2020,139,105419.
58 Li Ji, Lin Kaidong, Luo Xiaohu, et al. Applied Surface Science,2019,480,384.
59 Liang W, Xingxing D, et al. Journal of Materials Science &Technology.2019, 9, 31.
60 Yangzhi G, Junaid A S, et al. Applied Surface Science.2016, 360, 389.
61 Qiang Yujie, Fu Shulei, Zhang Shengtao, et al. Corrosion Science,2018,140.111.
62 Yun Z, Yu Z, et al. Materials Chemistry and Physics, 2017, 192,86.
63 Shan W W. Guangzhou Chemical Industry, 2019,47(14),17 (in Chinese).
单文雯. 广州化工,2019,47(14),17.
64 Samadianfard R, Seifzadeh D, Habibi Yangjeh A, et al. Surface & Coa-tings Technology,2020,385,125400.
65 Wang Zhi, Zhang Lei, Hu Weihong, et al. Progress in Organic Coatings,2018,125,500.
66 Park J, Park M, et al. Surface & Coatings Technology, 2014, 258,62.
67 Lu Y P, Qu Z Y, Ren Y L. The Chinese Journal of Nonferrous Metals, 1999(2),111 (in Chinese).
卢燕平, 屈祖玉, 任玉苓. 中国有色金属学报,1999(2),111.
68 Deng Qi, Li Weiping, Zhu Liqun, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects,2018,558,359.
69 Qiu Shihui, Liu Gang, Li Wei, et al. Journal of Alloys and Compounds,2018,747,60.