METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Study on Vacuum Casting Composite Technology of 316L/CuCrZr Trough Structure |
SUN Yuling1,2 , MA Honghao1,3,*, SHEN Zhaowu1, YANG Ming1, TIAN Qichao1
|
1 CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, China 2 Department of Ordnance Engineering, PLA Army Academy of Artillery and Air Defense, Hefei 230031, China 3 State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei 230027, China |
|
|
Abstract In order to obtain high quality 316L/CuCrZr composite plates, stainless steel plate with groove structure was designed, and 316L/CuCrZr composites with groove structure were prepared by vacuum casting.The bonding properties of steel-copper composite interface were studied by means of interface analysis and mechanical test.The results show that the alloying elements such as Fe, Cr and Cu in the 316L/CuCrZr matrix have interpenetrated and diffused at the interface, showing a zigzag diffusion zone. The diffusion region is about 600—750 μm, and there is no obvious intermetallic compounds. The microhardness near the interface bond is greater than that of the base metal.
|
Published:
Online: 2022-12-09
|
|
Fund:National Natural Science Foundation of China (51874267) and the Fundamental Research Funds for the Central Universities (WK2480000008,WK2480000007). |
|
|
1 Miao G H, Ma L M, Li X J, et al. Chinese Journal of High Pressure Physics, 2020,34(2),126(in Chinese). 缪广红, 马雷鸣, 李雪交, 等. 高压物理学报, 2020,34(2),126. 2 Niu A H. Engineering Blasting,2018,24(4), 67(in Chinese). 牛爱红.工程爆破, 2018,24(4), 67. 3 Chen Y C, Luo Z Y, Zhang Y Y, et al.Materials Reports B:Research Papers, 2019,33(1), 325(in Chinese). 陈永城, 罗子艺, 张宇鹏, 等. 材料导报:研究篇, 2019,33(1), 325. 4 Ramachandran S, Lakshminarayanan A K.Transactions of Nonferrous Metals Society of China, 2020,30(3),727. 5 Nguyen Q, Azadkhou A, Akbari M, et al.Journal of Manufacturing Processes, 2020,56, 206. 6 Jiang K,Wang Y,Zhang T,et al.Electric Welding Machine,2019,49(7),31(in Chinese). 江宽, 王宇, 张腾, 等. 电焊机, 2019,49(7),31. 7 Joshi G R, Badheka V J. Metallography, Microstructure, and Analysis, 2019,8(2),263. 8 Li H, Kang R M, Zhou S Q, et al. Nuclear Power Engineering, 2010,31(3),122(in Chinese). 李辉, 康人木, 周上祺, 等. 核动力工程, 2010,31(3),122. 9 Meng Y, Li X, Gao M, et al. Optics and Laser Technology, 2019, 111, 140. 10 Zhao M Q,Zhang T,Li H Y,et al. Electric Welding Machine,2019,49(7),41(in Chinese). 赵铭乾, 张腾, 李厚一, 等. 电焊机, 2019,49(7),41. 11 Liu Y F, Qiu Y Y, Zhang M L,et al. Oradance Material Science and Engineering,2017,40(5),10(in Chinese). 刘彦峰, 邱云云, 张美丽, 等. 兵器材料科学与工程, 2017,40(5),10. 12 Xie Q,Li J L,Zhang F S, et al. Welding Technology,2011,40(5),13(in Chinese). 解庆,李京龙, 张赋升, 等. 焊接技术, 2011,40(5),13. 13 Wang Yue. Study on microstructure and mechanical properties of 304L stainless steel /T2 copper diffusion welded joints.Master's Thesis,Northeastern University, China, 2017(in Chinese). 王月. 304L不锈钢/T2铜扩散焊接头组织和力学性能研究. 硕士学位论文,东北大学, 2017. 14 Yingyot P A, Samrerng D, Denchay B, et al. Journal of Materials Processing Technology, 2020,116490 15 Mangla V, Sharma J D, Kumar S, et al.Materials Today: Proceedings, 2020,26(Pt 2),724 16 Roy R K, Panda A K, Mitra A. Indian Welding Journal, 2013,46(1), 33. 17 Hou L T,Chen W G, Liu Y B, et al. Chinese Journal of Materials Research,2015, 29(9), 693(in Chinese). 侯林涛, 陈文革, 刘盈斌, 等. 材料研究学报, 2015, 29(9), 693. 18 Chen R S, Zhang F G, Liu S C, et al. Transactions of Materials and Heat Treatment, 2010, 31(1),126(in Chinese). 陈汝淑, 张锋刚, 刘世程, 等. 材料热处理学报, 2010, 31(1),126. 19 Zhang Taizheng. Study on preparation and interface of copper/steel bimetallic composites.Master's Thesis, Shenyang University, China, 2015 (in Chinese). 张太正. 铜/钢双金属复合材料的制备及其界面研究. 硕士学位论文,沈阳大学, 2015. |
|
|
|