Materials Reports 2021, Vol. 35 Issue (z2): 50-55 |
INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Research Progress on Preparation Methods of Rare Earth Oxide Hydrophobic Coatings |
HE Hui1,2, ZHANG Zhongming2, JIANG Yonggang1, FENG Junzong1, LI Liangjun1, FENG Jian1
|
1 Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, National University of Defense Technology, Changsha 410073, China 2 College of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China |
|
|
Abstract Hydrophobic coatings are a kind of functional material, which play asignificant role in life, architecture, industry and other fields. Rare earth oxides have attracted widespread attention since they were found to be hydrophobicity in 2013. Compared with organic hydrophobic coa-tings, rare earth oxide hydrophobic coatings have advantages of high temperature resistance, corrosion resistance, and wear resistance, they can be applied in higher temperature and more complex environments. Therefore, as a highly potential hydrophobic material, the rare earth oxide hydrophobic coating is expected to promote the rapid development of this field, which is one of the current research hotspots in the field of inorganic hydrophobic coatings. In recent years, researchers have carried out a more in-depth and systematic study on the hydrophobic mechanism of intrinsic hydrophobicity, and prepared rare earth oxide hydrophobic coatings by a variety of methods, such as template etching, spray, hydrothermal, electrochemical deposition, atomic layer deposition and magnetron ion sputtering. This paper summarized and discussed the hydrophobic mechanism and preparation methods of rare earth oxide hydrophobic coating in detail based on the current research status at home and abroad, and the future development direction of rare earth oxide hydrophobic coating is prospected.
|
Published: 09 December 2021
|
|
Fund:This work was financially supported by the Natural Science Foundation of Hunan Province (2018JJ2469). |
About author:: Hui He received his B.E. degree in engineering from Shaanxi University of Science and Technology in June 2017. He is currently pursuing his M.E. degree at the Science and Technology on Advanced Ceramic Fibers and Composites Laboratory of National University of Defense Technology,and College of Materials Science and Engineering, Xi'an University of Technology, under the supervision of associate Prof. Yonggang Jiang and Prof. Zhongming Zhang. The main research field is high temperature resistant hydrophobic composites. Zhongming Zhang is a professor and postgraduate tutor at the school of Materials Science and Engineering, Xi'an University of Technology. He received his B.E. degree in department of metal materials engineering from Jilin University in July 1989, received his M.S. degree in Changchun Institute of Optics and Fine Mechanics, Chinese Academy of Sciences in March 1992, and Ph.D. degree in School of Materials from Northwestern Polytechnical University in December 1999. He is an academic visitor from August 2000 for one year in Fukui University. His research interest is synthesis of metal solidification technique, novel rapid soli-dification of powder, metal materials forming with excellent properties. In recent years, he has published more than 60 acdemic papers and won more than 20 national inrention patents, 2 Shanxi Provincial science and technology words and Shanxi Provincial advanced science and technology awards. Yonggang Jiang received his B.E. degree in Polymer Materials Science and Engineering from Qingdao University in July 2001, and received his M.S. and Ph. D. degrees in Materials Science and Engineering from National University of Defense Technology in December 2003 and December 2007, respectively. He is an academic visitor from August 2016 for one year in University of Oxford and he is currently an associate professor in National University of Defense Technology. His research interest is synthesis of aerogel thermal insulation composites with multi-functional properties including ultralow thermal conductivity, high mechanical strength, high microwave transmission and low manufacturing cost. In rencent years, he has published more than 30 academic papers and abtained more than 20 state-authorized invention patents. |
|
|
1 Lu Y, Sathasivam S, Song J, et al. Science, 2015, 347(6226), 1132. 2 Li Y, Zhang Z Z, Wang M K, et al. Journal of Materials Chemistry A, 2017, 5(38),20277. 3 Boreyko J B, Chen C H. Physical Review Letters, 2009, 103(18),184501. 4 Rykaczewski K, Scott J, Rajauria S, et al. In: Meeting of the Aps Division of Fluid Dynamics. American Physical Society, 2011, pp. 8749. 5 Yang L H, Wan Y X, Qin Z L, et al. Corrosion Science ,2018, 130, 85. 6 Arukalam I O, Oguzie E E, Li Y. Journal of Colloid and Interface Science, 2018, 512, 674. 7 Bengaluru S S, Kondrashov V, Rühe, et al. Acs Appl Mater Interfaces, 2016, 8(20),12583. 8 Wang S L, Yu X Q, Zhang Y F. Journal of Materials Chemistry A, 2017, 5(45), 23489. 9 Siddiqui A R, Maurya R, Balani K. Journal of Materials Chemistry A, 2017, 5(6), 2936. 10 Wang N, Wang Y B, Shang B, et al. Journal of Colloid and Interface Science, 2018, 531, 300. 11 Chen W, Fadeev A Y, Hsieh M C, et al. Langmuir, 1999,15, 3395. 12 Ishizaki T, Masuda Y, Sakamoto M. Langmuir, 2011, 27(8),4780. 13 Xue C H, Zhang P, Ma J Z. Chemical Communications, 2013, 49,3588. 14 Liu Y, Liu J D, Li S Y, et al. ACS Applied Materials and Interfaces, 2013, 5(18),8907. 15 Ou J F, Hu W H, Liu S, et al. ACS Applied Materials and Interfaces, 2013, 5(20), 10035. 16 Marto P J, Looney D J, Rose J W, et al. International Journal of Heat and Mass Transfer, 1986, 29(8),1109. 17 Paxson A T, Yagüe J L, Gleason K K, et al. Advanced Materials, 2014, 26(3), 418. 18 Hillborg H, Gedde U W. IEEE Transactions on Dielectrics and Electrical Insulation, 1999, 6(5),703. 19 Gisele, Azimi, Rajeev, et al. Nature materials, 2013, 12(4),315. 20 Khan S, Azimi G, Yildiz B, et al. Applied Physics Letters, 2015, 106(6), 061601. 21 Preston D J, Miljkovic N, Sack J, et al. Applied Physics Letters, 2014, 105, 011601. 22 An T, Dou C Y, Ju J N, et al. Vacuum, 2019, 164,405. 23 Lundy R, Byrne C, Bogan J, et al. ACS Applied Materials and Interfaces, 2017, 9(15), 13751. 24 Fu S P, Rossero J, Chen C, et al. Applied Physics Letters, 2017, 110(8),081601. 25 Zubkov T, Stahl D, Thompson T L, et al. Journal of Physical Chemistry B, 2005, 109(32), 15454. 26 Long J Y, Zhong M L, Zhang H J, et al. Journal of Colloid and Interface Science, 2015, 441,1. 27 Azimi G, Kwon H M, Varanasi K K. MRS Communications, 2014, 7(1), 95. 28 Hyuk-Min Kwon. Tailoring hydrodynamics of non-wetting droplets with nano-engineered surfaces. Ph.D. thesis, Massachusetts Institute of Technology, USA, 2013. 29 Xu P, Coyle T W, Pershin L, et al. Journal of Colloid and Interface Science, 2018, 523, 35. 30 Zenkin S, Kos S, Musil J, et al. Journal of the American Ceramic Society, 2014, 97(9), 2713. 31 Bai M, Kazi H, Zhang X, et al. Scientific Reports, 2018, 8(1), 6973. 32 Rahman O S A, Mukherjee B, Priyadershini S, et al. Journal of the European Ceramic Society, 2020, 40(15), 5749. 33 Xiao L J, Deng M, Zeng W G, et al. Industrial & Engineering Chemistry Research, 2017, 56(43), 12354. 34 Baig U, Matin A, Gondal M A, et al. Journal of Cleaner Production, 2019, 208, 904. 35 An K, Long C, Sui Y, et al. Surface and Coatings Technology, 2020, 384, 125312. 36 Yasmeen S, Khan M R, Park K, et al. Ceramics International, 2020, 46(8), 12209. 37 Hu L Y, Song X F, Shan X, et al. ACS Applied Materials and Interfaces, 2019, 11(40), 37209. 38 冯小燕. 超疏水多孔材料的制备及性能研究. 硕士学位论文, 湖南大学,2016. 39 Hirosawa T, Isobe T, Matsushita S, et al. Journal of the Ceramic Society of Japan, 2020, 128(4), 210. 40 Lei J L, Hu L, Zhang J, et al. Applied Surface Science, 2020, 499, 143931. 41 王韬远. 几种稀土氧化物微纳结构疏水涂层的制备. 硕士学位论文, 湖南大学, 2016. 42 马晓梦, 陈雪, 余俊, 等. 山东化工, 2018, 47(20), 25. 43 黄强. 高强铝合金稀土超疏水防护膜研究. 硕士学位论文, 重庆大学, 2015. 44 金红霞. La2O3@AAO纳米复合结构的制备及其电润湿特性的研究. 硕士学位论文, 西北师范大学硕士学位论文, 2018. 45 章建文. 氧化锌、氧化镧结构化超疏水表面的制备及其电磁润湿特性. 硕士学位论文, 西北师范大学, 2020. 46 Li X P, Sun Y L, Luo C W, et al. Ceramics International, 2018, 44(11),13439. 47 常幸娟. 304不锈钢表面稀土氧化物涂层的制备及超疏水性能的研究. 硕士学位论文, 哈尔滨工业大学, 2018. 48 Chen Z, Hao L, Chen C. A fast electrodeposition method for fabrication of lanthanum superhydrophobic surface with hierarchical micro-nanostructures. Colloids & Surfaces Physicochemical & Engineering Aspects, 2012, 401, 1. 49 Lv Q P, Zhang S Q, Deng S W, et al. Surface and Coatings Technology, 2017, 320, 190. 50 Oh I K, Kim K, Lee Z H, et al. Chemistry of Materials, 2015, 27(1), 148. 51 Shi Z. Fabrication of robust hydrophobic cerium oxide coatings by magnetron sputtering technique. Ph.D. Thesis, City University of Hong Kong, China, 2017. 52 Shim J, Seo D, Oh S, et al. ACS Applied materials and interfaces, 2018, 10(37), 31765. 53 于彩红. 海水电池镁合金阳极疏水膜的制备与性能研究. 硕士学位论文, 哈尔滨工业大学, 2017. 54 Hassebrook A, Lucis M J, Shield J E, et al. In: 13th International Conference on Nanochannels, Microchannels, and Minichannels, San Francisco, 2015, pp, 7. 55 邢素丽, 吕家杰, 彭超义, 等. 第二十一届全国复合材料学术会议, 呼和浩特市, 2020. 56 Sanders S, Golden T D. Langmuir, 2019, 35(17), 5841. |
|
|
|