Materials Reports 2021, Vol. 35 Issue (z2): 333-340 |
METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research Advancing in Brazing Coating Technology |
SI Hao1, QIN Jian1,2, ZHONG Sujuan1, LONG Weimin1, WANG Zidong2, SHEN Yuanxun1, DONG Xian1
|
1 State Key Laboratory of Advanced Brazing Filler Metals & Technology, Zhengzhou Research Institute of Mechanical Engineering Co., Ltd., Zhengzhou 450001, China 2 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100000, China |
|
|
Abstract Brazing coating technology is widely used in aerospace, agricultural machinery, oil drilling, mining and other fields due to its advantages of high metallurgical bonding strength, good adaptability to complex components, large thickness range of prepared coatings, and high surface precision of coatings. It is a rapid development of surface coating preparation technology in recent years. This article firstly introduces the technical principles of brazing coating, and then it reviews in detail the brazing materials used in brazing, the preset methods of brazing materials and the welding methods of brazing coating, and then the application of brazing coating technology in various fields is reviewed. Finally, it pointed out the existing problems of brazing coating technology at this stage, and looked forward to the future development direction of brazing coating technology.
|
Published: 09 December 2021
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (U2004186). |
About author:: Hao Si, a master's degree student, studied at the Zhengzhou Institute of Mechanical Science in September 2019, mainly engaged in the development of new brazing technology. Jian Qin, master, engineer, mainly engaged in the research and development of welding metallurgy and welding materials, new welding technology and other fields, has published more than 40 papers. |
|
|
1 徐滨士,谭俊,陈建敏,等.中国表面工程,2011,24(2),1. 2 Ma Q, Li Y, Wang J, et al. Journal of Alloys and Compounds, 2015, 645, 151. 3 Liu J, Yang S, Xia W, et al. Journal of Alloys and Compounds, 2016, 654, 63. 4 Gisario A, Puopolo M, Venettacci S, et al. International Journal of Refractory Metals and Hard Materials, 2015, 52, 123. 5 Berger L M. International Journal of Refractory Metals and Hard Materials, 2015, 49,350. 6 张启运,庄鸿寿.钎焊手册,机械工业出版社,2018 7 李凯,王飞,张超,等.热加工工艺,2017,46(13),19. 8 Sekulic D P. Advances in brazing, Woodhead Publishing, UK,2013. 9 王星星,武胜金,李帅,等.中国有色金属学报,2021,31(01),72. 10 徐德生. 仿生非光滑耐磨复合涂层的研究.博士学位论文,吉林大学,2004. 11 侯立宁.表面技术,2012,41(4),49. 12 Chattopadhyay A K, Chollet L, Hintermann H E. Surface and Coatings Technology, 1991, 45(1-3), 293. 13 迟静,王淑峰,李敏,等.中国表面工程,2021,34(01),85. 14 Lu S P, Kwon O Y. Surface and Coatings Technology, 2002, 153(1), 40. 15 陈川辉,张林进,李庆棠,等.南京工业大学学报(自然科学版),2012,34(06),42. 16 谭兵,赵宝荣,樊建勋,等.兵器材料科学与工程,2003(01),19. 17 Liu T, Joo H G, Gao L X, et al. International Journal of Refractory Metals and Hard Materials, 2012, 35,246. 18 樊帅奇,张蕾涛,李海涛,等.材料热处理学报,2021,42(06),157. 19 张蕾涛,段理,刘德鑫,等.金属热处理,2021,46(04),167. 20 王智慧,杨爱弟,张田,等.材料工程,2008(09),56. 21 闵婷,高义民,李烨飞,等.稀有金属材料与工程,2012,41(02),271. 22 张杰,魏天路,李大胜,等.材料热处理学报,2020,41(11),153. 23 Wang D, Wang W Q, Chen X G, et al. Surface and Coatings Technology, 2017, 325,200. 24 薛敏鹏,韩彬,王勇,等.激光与光电子学进展,2011,48(09),85. 25 王文琴,王昭漫,王德,等.焊接,2017(12),41. 26 杨贤群,王立楠,孙逸铭,等.聊城大学学报(自然科学版),2016,29(1),47. 27 秦建,龙伟民,路全彬,等.材料导报,2020,34(S2),1457. 28 Shen J Y, Li L J, Wu X, et al. International Journal of Refractory Metals and Hard Materials,2019,84, 104973. 29 Ma B J, Lou J P, Pang Q. Journal of Materials Engineering and Perfor-mance,2014,23(4),1505. 30 Ma B J, Yang G L, Bu F N. International Journal of Refractory Metals and Hard Materials,2017,62,58. 31 潘蕾,陈锋,陶杰,吴申庆.复合材料学报,2002(4),114. 32 徐德生,任露泉,邱小明,等.农业机械学报,2004(6),148. 33 周霞,王越,周继扬,等.金属学报,2007(4),433. 34 齐剑钊.WC增强Cu基钎涂涂层的绿色技术研究.硕士研究论文,机械科学研究总院,2011. 35 裴新军,张建纲,黄继华,等.粉末冶金技术,2006(1),8. 36 李伟强,程楠,黄继华,等.焊接,2015,(2),29. 37 胡亮亮,沈承金,董衍林,等.热处理,2013,28(1),37. 38 Zhou R, Jiang Y H, Lu D H. Wear,2003,255(1-6),134. 39 Bach F, Wilhelm L A, Wenz T. Modern Surface Technology, Wiley-VCH Verlag GmbH & Co. KGaA, Germany,2006. 40 潘凤洋.碳化钨柔性布涂层的制备及其性能研究.硕士学位论文,华东理工大学,2016. 41 陆善平,郭义,陈亮山.材料导报,1999,(6),58. 42 Lu S P, Kwon O Y, Guo Y. Wear, 2003, 254(5-6),421. 43 Xu X P, He L, Xia C Z, et al. High Temperature Materials and Processes, 2019, 38(2019),60. 44 Xu X, Ding H, Xia C, et al. Coatings, 2019, 9(4), 214. 45 Zhu J W, Zou J S, Qiao Y X, et al. Journal of the Korean Physical Society,2020,76(11),1035. 46 Xu X P, Wang Y, Liu C, et al. Coatings,2019,9(11),703. 47 张宝军,张长军.筑路机械与施工机械化,2020,37(05),11. 48 Yang Y L, Sun Y F, Shen J J, et al. Journal of Surface Engineered Materials and Advanced Technology, 2012,2(1),40. 49 黄本生,高钰枭,陈鹏,等.材料导报,2018,32(13),2272. 50 杜圣恩,林晨,姚永强,等.机械工程材料,2019,43(7),38. 51 张大伟,雷廷权,李强.中国表面工程,1999(3),1. 52 Long W, Liu D, Wu A, et al. Diamond and Related Materials, 2020, 110,108085. 53 Long W, Liu D, Dong X, et al. Surface Engineering, 2020, 36(12),1315. 54 赵龙志,邓楚祥,王震,等.表面技术,2020,49(10),39. 55 肖奇,孙文磊,刘金朵,等.材料导报,2021,35(8),8146. 56 Guo C, Zhou J, Chen J, et al. Wear, 2011, 270(7-8), 492. 57 周许升,邹伟,龙伟民,等.电焊机,2018,48(3),205. 58 丁天然,黄俊兰,路全彬,等.超硬材料工程,2018,30(05),20. 59 黄俊兰,龙伟民,路全彬,等.焊接,2018(11),26. 60 卜凡宁. WC/Ni复合钎涂工艺及单面涂层刀具自锐性的研究.硕士学位论文,青岛科技大学,2018. 61 Wang Y, Qiu X M, Sun D Q, et al. International Journal of Refractory Metals and Hard Materials, 2011, 29(2),293.62 李奇林,徐九华,苏宏华,等.工具技术,2016,50(10),15. 63 杨二娟,李勇,李巍,等.表面技术,2019,48(9),238. 64 沈婧怡,任维彬,薛亚平,等.红外与激光工程,2019,48(6),358. 65 黄弋力,朱平,孟氢钡.电焊机,2019,49(11),84. 66 王书文,廖玉红,王腾迪.中国表面工程,2021,34(2),94. 67 刘德辉,卢全国,晏建武,等.材料保护,2013,46(12),34. |
|
|
|