METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research Status of External Force Assisted Jet Electrodeposition |
WANG Xu1,2, NIU Zongwei1, WANG Xiaoming2, ZHAO Yang2, HAN Guofeng2, CHANG Qing2, FU Hua3, TENG Tao4, ZHAO Feifei5
|
1 College of Mechanical Engineering, Shandong University of Technology, Zibo 255049, China 2 Key Laboratory of National Defense Technology for Equipment Remanufacturing Technology, Army Armored Forces Academy, Beijing 100072, China 3 Unit 75180 of the People’s Liberation Army of China, Guilin 541005, China 4 Unit 32381 of the People’s Liberation Army of China, Beijing 100072, China 5 Department of Electronic Engineering, Army Academy of Border and Coastal Defence, Xi’an 710108, China |
|
|
Abstract Jet electrodeposition is a new selective electrodeposition technique developed in recent years, which has the advantages of fast deposition speed, high deposition accuracy and low cost, and can solve the problems of low deposition efficiency and poor deposition quality of traditional electrodeposition, and has been widely used in the rapid and efficient preparation of high-performance coatings. However, the limitations of the application of jet electrodeposition in the pursuit of higher performance and larger thickness of the sedimentary obvious, which are mainly reflected in the uneven deposition thickness and unable to suppress and elimate protuberant, nodules, hydrogen bubble defects during deposition, and can not solve the problem of composite particles together, and they seriously restrict the practial application of the jet electrodeposition technique. To eliminate the limitation of the jet electrodeposition technique, the study found that the introduction of magnetic field, ultrasonic or friction auxiliary force can effectively optimize the deposit quality, greatly reduce the amount of coating defects, significantly improve the composite particle reunion phenomenon, and help to prepare coatings with smaller grains, smoother surface, better hardness, better wear resistance and better corrosion resistance. Besides, they found that the uncomfortable magnetic induction intensity, ultrasonic power and mode, friction and other parameters will cause the coatings surface quality and performance decline. At the same time, on the basis of sucessfully using extermal force assisted jet electrodeposition to prepare high quality and high performance coatings, relevant scholars also focused on studying the influence mechanism of external force parameters on the surface quality and performance of coatings, in order to give full play to the auxiliary effect of external forces and further pursue the efficiency of coating preparation, and have achieved fruitful results. Thus, this review summarizes the research status of preparing coatings by magnetic field, ultrasonic or friction force assisted jet electrodeposition. Besides, the action principle of three kinds of external force and mechanism is discussed in detail, and points out the applicable objects, the existing problems and development trend of three kinds of auxiliary force, which provides the reference for preparing coatings with better perfor-mance even micro-nano additive manufacturing and rapid prototyping technology.
|
Published: 12 March 2021
|
|
Fund:National Key R&D Program of China (2018YFB1105800), Key Laboratory of Vibration and Control of Aero-Propulsion System Ministry of Education, Northeastern University (VCAME201706). |
About author:: Xu Wang, graduated from University of Science and Technology Liaoning in 2018 with a bachelor’s degree, and is currently pursuing a master’s degree at Shandong University of Technology. His main research area is jet electrodeposition. Yang Zhao, born in 1983, doctor of engineering, assistant researcher. His research direction is additive manufacturing and surface strength of the copper alloy. Qing Chang, born in 1987, master, assistant researcher. Her research direction is surface engineering and remanufacturing engineering. |
|
|
1 Karnik M, Ghosh A, Shekhar R. Transactions of the Institute of Metal Finishing,2009,87,264. 2 Kunieda M, Katoh R, Mori Y. CIRP Annals,1998,47,161. 3 Qiao G Y, Jing T F, Wang N, et al. Electrochimica Acta,2005,51,85. 4 Calderón J A, Henao J E, Gómez M A. Electrochimica Acta,2014,124,190. 5 Yang Y, Cheng Y F. Electrochimica Acta,2013,109,638. 6 Wu A D. Study on the numerical controlled jet electroforming. Ph.D. Thesis, Nanjing University of Aeronautics and Astronautics, China,2001(in Chinese). 吴安德.数控喷射电铸技术研究.博士学位论文,南京航空航天大学,2001. 7 Ma S W, Chen J S, Tian Z J. Hot Working Technology,2016,45(6),9(in Chinese). 马世伟,陈劲松,田宗军.热加工工艺,2016,45(6),9. 8 Qiao G Y, Jing T F, Wang N, et al. Electrochemica Acta,2005,51,85. 9 Zhao Y P. Fundamental research on rapid prototyping nanocrystalline copper oriented by jet electroforming. Ph.D. Thesis, Nanjing University of Aeronautics and Astronautics, China,2005(in Chinese). 赵阳培.射流电铸快速成型纳米晶铜工艺基础研究.博士学位论文,南京航空航天大学,2005. 10 Dheeraj P R, Patra A, Sengupta S, et al. Journal of Alloys and Compounds,2017,29,1093. 11 Ataie S A, Zakeri A. Journal of Alloys and Compounds,2016,674,315. 12 Tudela I, Zhang Y, Pal M, et al. Surface & Coatings Technology,2015,276,89. 13 Chen J S. Procedia Engineering,2011,15,4419. 14 Wang C, Zhong Y, Ren W, et al. Appled Surface Science,2008,254,5649. 15 Guo Z C, Guo S X, Zhu X Y. Electroplating & Polution Control,2001,21(2),4(in Chinese). 郭忠诚,郭淑仙,朱晓云.电镀与环保,2001,21(2),4. 16 Xia F F, Jia W C, Ma C Y, et al. Applied Surface Science,2018,434,228. 17 Bakhit B. Surface & Coatings Technology,2015,275,324. 18 Calderón J A, Henao J E, Gómez M A. Electrochimica Acta,2014,124,190. 19 Yang Y, Cheng Y F. Electrochimica Acta,2013,109,638. 20 Dai P Q, Zhong Y H, Zhou X. Surface Engineering,2014,27,71. 21 Jiang S W, Yang L, Pang J N. Surface & Coatings Technology,2016,286,197. 22 Ning D D, Zhang A, Murtaza M, et al. Journal of Alloys and Compounds,2019,777,1245. 23 Yang Y, Cheng Y F. Surface & Coatings Technology,2013,216,282. 24 Das S, Banthia S, Patra A, et al. Journal of Alloys and Compounds,2018,738,394. 25 Jia W P, Wu M H, Jia Z Y, et al. Surface Technology,2019,48(9),252(in Chinese). 贾卫平,吴蒙华,贾振元,等.表面技术,2019,48(9),252. 26 Wang J D, Zhao Y, Zhu Y G, et al. Ordnance Material Science and Engineering,2016,39(3),93(in Chinese). 王金东,赵岩,朱砚葛,等.兵器材料科学与工程,2016,39(3),83. 27 Jiang W, Shen L D, Qiu M B, et al. Journal of Alloys and Compounds,2018,762,115. 28 Qiao G, Jing T, Wang N, et al. Electrochim Acta,2006,51,85. 29 Zhou S A, Jia W P, Chen W R. Journal of Functional Materials,2020,51(7),07208. 周绍安,贾卫平,陈伟荣.功能材料,2020,51(7),07208. 30 Long Q, Lu F H, Luo X, et al. Hydrometallurgy of China,2018,37(3),179(in Chinese). 龙琼,路坊海,罗勋,等.湿法冶金,2018,37(3),179. 31 Jia W P, Jia Z Y, Miao B, et al. Journal of Dalian University of Techno-logy,2013,53(5),671(in Chinese). 贾卫平,贾振元,苗斌,等.大连理工大学学报,2013,53(5),671. 32 Zhou P W, Zhong Y B, Long Q, et al. Journal of University of Science and Technology Beijing,2014,36(6),787(in Chinese). 周鹏伟,钟云波,龙琼,等.北京科技大学学报,2014,36(6),787. 33 Jiang W, Shen L D, Xu M Y, et al. Journal of Alloys and Compounds,2019,791,847. 34 Ma C Y, Liu B Y, Zhu Y Y, et al. Journal of Function Materials,2015,19(46),19115(in Chinese). 马春阳,刘滨瑜,朱永永,等.功能材料,2015,19(46),19115. 35 Li Y. Study on magnetic field-pulse electrodeposited Ni-TiN nanocoating on the surface of mud pump wearing parts. Master’s Thesis, Northeast Petroleum Universty, China,2016(in Chinese). 李洋.泥浆泵易损件表面磁场-脉冲电沉积Ni-TiN纳米镀层研究.硕士学位论文,东北石油大学,2016. 36 Wang C. Investigation on preparation of Ni-nano Al2O3 composite coating and the electrodeposition mechanism in the magnetic field. Ph.D. Thesis, Shanghai University, China,2011(in Chinese). 汪超.磁场中Ni-纳米Al2O3复合镀层制备及其电沉积机理的研究.博士学位论文,上海大学,2011. 37 Feng Q Y, Li Y J, Zhang Z T, et al. Nanotechnology and Precision Engineering,2007,5(3),215(in Chinese). 冯秋元,李廷举,张忠涛,等.纳米技术与精密工程,2007,5(3),215. 38 Bhatnagar M, Baliga B J. IEEE Transactions on Electron Devices,1993,40,645. 39 Bahadormanesh B, Dolati A, Ahmadi M R. Journal of Alloys and Compounds,2011,509,9406. 40 Wu H, Zhao G, Mu J. Transactions of Nonferrous Metals Society of China,2010,20,703. 41 Mallik A, Ray B C. Thin Solid Films,2009,517,6612. 42 Li Y W, Shang X, Huang X X, et al. Plating & Finishing,2012,34(6),10(in Chinese). 李延伟,尚雄,黄晓曦,等.电镀与精饰,2012,34(6),10. 43 Li C M, Zhao L Z, Liu Z P, et al. Metallic Functional Materials,2009,16(2),37(in Chinese). 李昌明,赵灵智,刘志平,等.金属功能材料,2009,16(2),37. 44 Liu R, Gong K. Mechanical Science and Technology for Aerospace Engineering,2010,29(8),997(in Chinese). 刘润,宫凯.机械科学与技术,2010,29(8),997. 45 Lan L, Tan J, Du J, et al. China Mechanical Engineering,2015,26(9),1260(in Chinese). 兰龙,谭俊,杜军,等.中国机械工程,2015,26(9),1260. 46 Wu D, He J W, Tan J, et al. Jouenal of Harbin Institute of Technology,2018,50(5),83(in Chinese). 吴迪,何嘉武,谭俊,等.哈尔滨工业大学学报,2018,50(5),83. 47 Wu D, Tan J, Shi J, et al. Journal of Academy of Armored Force Engineering,2016,30(6),107(in Chinese). 吴迪,谭俊,石晶,等.装甲兵工程学院学报,2016,30(6),107. 48 Liao Q, Li W P, Liu H C, et al. Chinese Journal of Aeronautics,2010,23,599. 49 Zheng X H, Wang M, Song H, et al. Surface & Coatings Technology,2017,325,181. 50 Ma C Y, Yu W Y, Jiang M Z, et al. Ceramics International,2018,44,5163. 51 Liang Z P, Wang Y Y, Jin H, et al. Electroplating & Polution Control,2019,39(2),68(in Chinese). 梁智鹏,王一雍,金辉,等.电镀与环保,2019,39(2),68. 52 Chen T. Study on ultrasonic pulse electroforming and the properties of copper matrix carbon fiber powder composite. Master’s Thesis, China University of Mining and Technology, China,2016(in Chinese). 陈田.超声场脉冲电铸制备铜-碳纤维粉复合材料及其性能研究.硕士学位论文,中国矿业大学,2016. 53 Song H, Tan J, Zheng X H, et al. Electroplating & Finishing,2017,36(17),903(in Chinese). 宋晧,谭俊,郑晓辉,等.电镀与涂饰,2017,36(17),903. 54 Tan J, Wu D, Gao Y L, et al. Journal of Academy of Armored Force Engineering,2011,25(4),80(in Chinese). 谭俊,吴迪,高玉琳,等.装甲兵工程学院学报,2011,25(4),80. 55 Li Q. Preparation and characterization of Ni-TiN nanocomposite coating by ultrasound assisted jet electrodeposition. Master’s Thesis, Northeast Petroleum University, China,2018(in Chinese). 李强.超声辅助喷射电沉积Ni-TiN纳米复合镀层的制备及表征.硕士学位论文,东北石油大学,2018. 56 Liu B Y. Research on pulse electroforming of Ni-TiN nanocomposite deposits in an ultrasonic field. Master’s Thesis, Northeast Petroleum University, China,2017(in Chinese). 刘滨瑜.超声场中脉冲电铸Ni-TiN纳米复合沉积层研究.硕士学位论文,东北石油大学,2017. 57 Zanella C, Lekka M, Bonora P L. Surface Engineering,2010,26,511. 58 Lan M M. Study on process and properties of pulse electroformed Ni-CeO2 nanocomposite deposits in an ultrasonic field. Master’s Thesis, Henan University of Science and Technology, China,2017(in Chinese). 兰明明.超声场中脉冲电铸Ni-CeO2纳米复合沉积层的工艺及性能研究.硕士学位论文,河南科技大学,2009. 59 Wu D, Song J L, Lan L, et al. Journal of Academy of Armored Force Engineering,2016,30(4),94(in Chinese). 吴迪,宋金琳,兰龙,等.装甲兵工程学院学报,2016,30(4),94. 60 Jin H, Chen L J, Wang Y Y, et al. Electroplating & Finishing,2018,37(19),865(in Chinese). 金辉,陈立佳,王一雍,等.电镀与涂饰,2018,37(19),865. 61 Zhang J W, Su J M, Wang Y Y, et al. Nonferrous Metals,2015,4(15),59. 张峻巍,苏建铭,王一雍,等.有色金属,2015,4(15),59. 62 Tian J Y. Preparation mechanism and properties of Ni-TiN nanocomposite coatings by power ultrasound-pulse electrodeposition. Master’s Thesis, Northeast Petroleum University, China,2017(in Chinese). 田济语.功率超声-脉冲电沉积Ni-TiN纳米复合镀层制备机理及性能研究.硕士学位论文,东北石油大学,2017. 63 Huang D Z. Studies on copper-based superhydrophobic coating by jet electrodeposition. Ph.D. Thesis, Nanjing University of Aeronautics and Astronautics, China,2018(in Chinese). 黄大志.喷射电沉积制备铜基超疏水涂层的基础研究.博士学位论文,南京航空航天大学,2018. 64 Kozhanov V N, Smirnov B N, Filosofova A B, et al. Powder Metallurgy and Metal Ceramics,1988,27,512. 65 Thiemig D, Bung A, Talbot J B. Journal of the Electrochemical Society,2007,154,510. 66 Nieh T G, Wang J G. Intermetallics,2005,13,377. 67 Zhu J, Tian Z J, Shen L D, et al. The Chinese Journal of Nonferrous Metals,2013,23(6),1618(in Chinese). 朱军,田宗军,沈理达,等.中国有色金属学报,2013,23(6),1618. 68 Ma Y, Shen L D, Tian Z J, et al. Material Engineering,2014(3),11(in Chinese). 马云,沈理达,田宗军,等.材料工程,2014(3),11. 69 Liu X, Shen L D, Qiu M B, et al. Surface & Coatings Technology,2016,305,231. 70 Liu X. Research on controllable friction aided jet electrodeposition of film preparation technology. Master’s Thesis, Nanjing University of Aeronautics and Astronautics, China,2016(in Chinese). 刘霞.可控摩擦辅助喷射电沉积薄膜制备技术研究.硕士学位论文,南京航空航天大学,2017. 71 Chen X L, Liu X H, Ouyang M.Z, et al. Scientific Reports, DOI:10. 1038/s41598-019-40774-5. 72 Wang Y H, Shen L D, Qiu M B, et al. Journal of the Electrochemical Society,2016,163,579. 73 Liang Z J, Xie F K. Plating & Finishing,2000,22(2),12(in Chinese). 梁志杰,谢凤宽.电镀与精饰,2000,22(2),12. 74 Ning Z H, He Y D, Gao W. Surface & Coatings Technology,2008,202,2139. 75 Zhu Z W, Zhu D. China Mechanical Engineering,2006,17(1),60(in Chinese). 朱增伟,朱荻.中国机械工程,2006,17(1),60. 76 Zhu B L. Basic research on rapid prototyping and electrodeposition with friction. Master’s Thesis, Nanjing University of Aeronautics and Astronautics, China,2011(in Chinese). 朱本苓.摩擦电沉积快速成形金属零件的基础研究.硕士学位论文,南京航空航天大学,2011. 77 Huang D Z, Shen L D, Chen J S. Transactions of the Indian Institute of Metals,2013,67,351. 78 Wang G F. Basic research on deposit morphology control technologies in jet electrodeposition by smoothing, multicomponenting and interlacing. Ph.D. Thesis, Nanjing University of Aeronautics and Astronautics, China,2011(in Chinese). 王桂峰.平整、多元、交织射流电沉积形态控制技术的基础研究.博士学位论文,南京航空航天大学,2011. 79 Yuan X Y, Wang G F, Shen L D, et al. China Sciencepaper,2016,11(22),2580(in Chinese). 袁晓园,王桂峰,沈理达,等.中国科技论文,2016,11(22),2580. 80 Zhu J. New technology and mechanism of nano mutilayer films prepared by multiple array jet electrodeposition. Ph.D. Thesis, Nanjing University of Aeronautics and Astronautics, China,2017(in Chinese). 朱军.多元阵列射流电沉积制备纳米多层膜新技术及机理研究.博士学位论文,南京航空航天大学,2017. 81 Huang Y C. Principles of metal corrosion and protection, Shanghai Jiao Tong Press, China,1989(in Chinese). 黄永昌.金属腐蚀与防护原理,上海交通大学出版社,1989. 82 Xu J M. Gansu Metallurgy,2007,29(2),68(in Chinese). 许俊民.甘肃冶金,2007,29(2),68. 83 Zhu J. Experimental study on friction aided jet electrodeposition. Master’s Thesis, Nanjing University of Aeronautics and Astronautics, China,2011(in Chinese). 朱军.摩擦辅助喷射电沉积技术工艺试验研究.硕士学位论文,南京航空航天大学,2011. 84 Guo F S. Mechanical grinding of electro galvanized iron alloy coating and corrosion resistance mechanism. Master’s Thesis, Northeast Petroleum University, China,2017(in Chinese). 郭方松.机械研磨电镀锌铁合金镀层及耐蚀机理研究.硕士学位论文,东北石油大学,2017. 85 Nikolić N D, Rakoević Z, Popov K I. Journal of Electroanalytical Che-mistry,2001,514,56. 86 Ye X P, Bonte D, Celis J P, et al. Journal of the Electrochemical Society,1992,139,1592. 87 Zhu J, Tian Z J, Liu Z D, et al. Journal of South China University of Technology (Natural Science Edition),2011,39(11),92(in Chinese). 朱军,田宗军,刘志东,等.华南理工大学学报(自然科学版),2011,39(11),92. 88 Yi D G, Shen L D, Zhu J, et al. Materials Science & Technology,2015,23(3),96(in Chinese). 易笃钢,沈理达,朱军,等.材料科学与工艺,2015,23(3),96. 89 Ban C L, Shao X,Ma J, et al. Transactions of Nonferrous Metals Society of China,2012,22,1989. 90 Zhang L, Shen L D, Liu Z D, et al. Journal of Materials Science & Engineering,2013,31(2),243(in Chinese). 张磊,沈理达,刘志东,等.材料科学与工程学报,2013,31(2),243. 91 Lv B. Preparation, characterization and application in remanufacturing of electrodeposited nanocrystalline nickel coating assisted by flexible friction. Ph.D. Thesis, Northeastern University, China,2015(in Chinese). 吕镖.柔性摩擦辅助电沉积纳米晶镍镀层制备表征及再制造应用.博士学位论文,东北大学,2015. 92 Zhuo W, Shen L D, Qiu M B, et al. Surface & Coatings Technology,2018,333,87. 93 Zhuo W. Research on nanocrystalline nickel prepared by jet electrodeposition with movable, flexible friction. Master’s Thesis, Nanjing University of Aeronautics and Astronautics, China,2018(in Chinese). 卓威.动柔性摩擦喷射电沉积制备纳米晶镍试验研究.硕士学位论文,南京航空航天大学,2018. 94 Lv B, Hu Z F, Wang X H, et al. Chinese Journal of Materials Research,2014,28(4),255(in Chinese). 吕镖,胡振峰,汪笑鹤,等.材料研究学报,2014,28(4),255. 95 Deng Y, Lv B, Wang X H, et al. Electroplating & Finishing,2016,35(19),1021. 邓云,吕镖,汪笑鹤,等.电镀与涂饰,2016,35(19),1021. 96 Lv B, Hu Z F, Wang X H, et al. Surface & Coatings Technology,2015,270,123. 97 Schlesinger M, Paunovic M. Modern electroplating, John Wiley & Sons, USA,2010. 98 Zhang Y, Zhu Z W, Zhu D. China Mechanical Engineering,2012,23(8),893(in Chinese). 章勇,朱增伟,朱荻.中国机械工程,2012,23(8),893. 99 Jiang W, Shen L D, Wang K, et al. Journal of Alloys and Compounds,2019,787,1089. 100 Tian Z J, Wang D S, Wang G F, et al. Transactions of Nonferrous Metals Society of China,2010,20,1037. 101 Hodes G. Electrochemistry of nanomaterials, Wiley-Vch, Germany,2001. |
|
|
|