POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
Preparation and Properties of Eucommia Ulmoides Gum/Epoxy Resin Anticorrosive Coating |
FENG Xiao1, KANG Hailan1,2, YANG Feng1,2, FANG Qinghong1,2
|
1 College of Materials Science and Engineering, Shenyang University of Chemical Technology, Shenyang 110142 2 Key Laboratory for Rubber Elastomer of Liaoning Province, Shenyang University of Chemical Technology, Shenyang 110142 |
|
|
Abstract Eucommia ulmoides gum (EUG) was epoxidized by emulsion method, the obtained epoxidized eucommia ulmoides gum (EEUG) and epoxy resin (E44) were blended as a film-forming substance, and an anti-corrosive coating was prepared by using ethyl acetate as a solvent; the coating was carried out by changing the epoxidizing degree of eucommia ulmoides gum and the matrix ratio (EEUG/E44), and testing by infrared spectroscopy, nuclear magnetic resonance, electrochemical impedance, adhesion test and salt spray corrosion test. Through infrared spectroscopy and nuclear magnetic resonance analysis, it could be obtained that EEUG was successfully prepared and its epoxidation was calculated. In electrochemical impedance analysis, adhesion analysis, coating morphology analysis and salt spray resistance analysis, it was known that the epoxy eucommia rubber coating with low epoxidation had better adhesion effect and better corrosion resistance. It could be concluded that proper addition of EEUG could enhance the interaction between coating and metal matrix, and effectively retarded the corrosion of coating. The optimum ratio of film-forming material was 0.5/1 (EEUG/E44).
|
Published: 16 September 2019
|
|
Fund:This work was supported by the National Key Research and Development Program of China (2017YFB0306902). |
About author:: Xiao Feng is a master student at Shenyang University of Chemical Technology, mainly studies rubber composite materials. Qinghong Fangis currently a professor at the School of Materials Science and Engineering at Shenyang University of Chemical Technology. He is mainly engaged in the teaching and research of polymers and composite materials. He has published 200 papers in various publications at various levels, and many of them have been accepted by EI, and 16 patents have been granted. Since 2002, he has undertaken and participated in 10 key research and development projects, the National Natural Science Foundation, provincial and municipal research projects and enterprise projects. |
|
|
[1] |
Wei B M. Theory and application of metal corrosion, Chemical Industry Press, China, 1984(in Chinese).魏宝明. 金属腐蚀理论及应用, 化学工业出版社, 1984.
|
[2] |
Melchers R E. Bioelectrochemistry, 2014, 97, 89
|
[3] |
Ye M Q, Jin X H, Chen N H, et al. Equipment Environmental Enginee-ring, 2011, 8(2),4 (in Chinese).叶美琪, 金晓鸿, 陈乃红, 等. 装备环境工程, 2011, 8 (2), 4.
|
[4] |
Yang P Y, Gao R M, Bai W P. Equipment Environmental Engineering, 2010, 7(5),141(in Chinese).杨培源, 高汝明, 白文平. 装备环境工程, 2010, 7(5),141.
|
[5] |
Liu C S, Qin L, Li C L, et al. Surface Technology, 2014, 43(5),100(in Chinese).刘成松, 秦林, 李翠玲, 等. 表面技术, 2014, 43(5),100.
|
[6] |
Yang W J, Neoh K G, Kang E T, et al. Progress Polymer Science,, 2014, 39(5),1017.
|
[7] |
Zhang Z P, Qi Y H, Zhang Z W. Advanced Materials Research, 2012, 496,215.
|
[8] |
Liu W, Cao P, Li X F, et al. Guangdong Chemical Industry, 2016,43(2),1(in Chinese).刘卫,曹佩,李雪飞,等. 广东化工, 2016,43(2),1.
|
[9] |
Li M, Zhang H K, Liu L X, et al. Shanghai Coatings, 2012(5),4(in Chinese).李明, 张海宽, 刘兰轩, 等. 上海涂料, 2012(5), 4.
|
[10] |
张金勇, 李季, 王献红. 中国专利, CN99116978, 1998.
|
[11] |
Ghasemi-Kahrizsangi A, Shariatpanahi H, Neshati J, et al. Applied Surface Science, 2015, 331,115.
|
[12] |
Du H Y. Nonwood Forest Research, 2010, 28(3),1(in Chinese).杜红岩. 经济林研究, 2010, 28(3),1.
|
[13] |
Yan R F, Hu H J. Bulletin of National Natural Science Foundation of China, 1994(1), 55(in Chinese).严瑞芳, 胡汉杰. 中国科学基金, 1994(1),55.
|
[14] |
Yang F, Wang F, Fang Q H, et al. Polymer Materials Science and Engineering, 2015, 31(5), 56(in Chinese).杨凤,王芳, 方庆红, 等. 高分子材料科学与工程,2015,31(5),56.
|
|
|
|