METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Gradient of Microstructure and Texture Evolution of Cold Rolled High Purity Tantalum Plate During Annealing Process |
ZHU Jialin, LIU Shifeng, LIU Yahui, JI Jingli, LI LiJuan
|
College of Materials Science and Engineering, Chongqing University, Chongqing 400044; |
|
|
Abstract 135° clock-rolled Ta plates with 87% thickness reduction were annealed at 1 323 K for different time (5 min, 10 min, 30 min, 60 min, 90 and 120min, respectively). The through-thickness microstructure evolution was systematically studied by electron back-scattered diffraction (EBSD), X-ray diffraction (XRD) and microhardness techniques. It was revealed that the recrystallization nucleus preferred to appear in the central region dominated by high angle boundary nucleation mechanism in this process. However, subgrain nuclear mechanism played an important role in the nucleation of near surface zone. Besides, the center area showed faster recrystallization kinetics than the near surface area, and after recrystallization, the center of {111}〈uvw〉(〈111〉∥ND)texture was stronger whereas the near surface possessed much more {100}〈uvw〉(〈100〉∥ND). Such a difference was mainly contributed to the strong {111} texture of the center layer possessing high stored energy as well as its severe fragmentation of internal grain. On the contrary, {100} texture accounting for a large proportion of the near surface zone, which contained lower stored energy and small internal misorientations, led to a longer incubation period for recrystallization nucleation. As a result, the recrystallization texture gradient along the thickness direction appeared.
|
Published: 22 November 2018
|
|
|
|
1 Cardonne S M, Kumar P, Michaluk C A, et al. Tantalum and its alloys[J]. International Journal of Refractory Metals & Hard Mate-rials,1995,13(4):187. 2 Michaluk C A, Field D P, Nibur K A, et al. Effects of local texture and grain structure on the sputtering performance of tantalum[J]. Materials Science Forum,2002,408:1615. 3 Michaluk C A. Correlating discrete orientation and grain size to the sputter deposition properties of tantalum[J]. Journal of Electronic Materials,2002,31(1):2. 4 Shang Zaiyan, Jiang Xuan, Li Yongjun, et al. Sputtering targets used in integrated circuit[J]. Rare Metals,2005,29(4):97(in Chinese). 尚再艳,江轩,李勇军,等.集成电路制造用溅射靶材[J].稀有金属,2005,29(4):97. 5 Yang Qian, Zhang Zhiqing, Zou Bin, et al. Investigation on microstructure and texture in high pure tantalum sputtering targets by EBSD[J]. Journal of Chinese Electron Microscopy Society,2010,29(1):85(in Chinese). 杨谦,张志清,邹彬,等.高纯Ta溅射靶材微观组织与织构的EBSD研究[J].电子显微学报,2010,29(1):85. 6 Zhang Z, Kho L, Wickersham C E. Effect of grain orientation on tantalum magnetron sputtering yield[J]. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films,2006,24(4):1107. 7 Reza M, Sajuri Z, Yunas J, et al. Effect of sputtering target’s grain size on the sputtering yield, particle size and coercivity (Hc) of Ni and Ni20Al thin films[J]. IOP Conference Series: Materials Science and Engineering,2016,114(1):012116. 8 Li Zhaobo, Zhang Chunheng, Li Guipeng, et al. Research on grain size controlling process of niobium target used for sputtering and coating[J]. Development and Application of Materials,2010,25(6):33(in Chinese). 李兆博,张春恒,李桂鹏,等.溅射镀膜用铌靶材晶粒尺寸控制工艺研究[J].材料开发与应用,2010,25(6):33. 9 Chen Ming, Zhu Xiaoguang, Wang Xinping, et al. Study on tantalum grain refinement process and microstructure, texture[J]. Hot Working Technology,2010,39(8):26(in Chinese). 陈明,朱晓光,王欣平,等.Ta晶粒细化工艺及组织、织构的研究[J].热加工工艺,2010,39(8):26. 10 Humphreys F J, Hatherly M. Recrystallization and related annealing phenomena (second edition)[M]. Amsterdam: Elsevier,2004. 11 Vandermeer R A, Snyder W B. Recovery and recrystallization in rolled tantalum single crystals[J]. Metallurgical Transactions A,1979,10(8):1031. 12 Liu S F, Fan H Y, Deng C, et al. Through-thickness texture in clock-rolled tantalum plate[J]. International Journal of Refractory Metals & Hard Materials,2015,48:194. 13 Pawlik K. Determination of the orientation distribution function from pole figures in arbitrarily defined cells[J]. Physica Status Solidi,2010,134(2):477. 14 Fan H, Liu S, Li L, et al. Largely alleviating the orientation dependence by sequentially changing strain paths[J]. Materials & Design,2016,97:464. 15 Sevillano J G, Houtte P V, Aernoudt E. Inhomogeneity in the stored energy of deformed BCC-metals[J]. Scripta Metallurgica,1976,10(8):775. 16 Borbely A, Driver J H, Ungar T. An X-ray method for the determination of stored energies in texture components of deformed metals; application to cold worked ultra high purity iron[J]. Acta Materialia,2000,31(10):2005. 17 Jensen D J. Growth rates and misorientation relationships between growing nuclei/grains and the surrounding deformed matrix during recrystallization[J]. Acta Metallurgica et Materialia,1995,43(11):4117. |
|
|
|