Nb-Ti微合金高强钢动态再结晶动力学及临界条件

doi:10.11896/j.issn.1005-023X.2018.22.011

Abstract
Figure/Table
References
Related Citation (11)

Download:

Full Text ( PDF ) (5029KB)
Export: BibTeX | EndNote (RIS)

Abstract The hot compression test was conducted on a Gleeble-3500 thermo-simulation machine over the range of temperatures from 900 ℃ to 1 100 ℃ and strain rates from 0.01 s^-1 to 5 s^-1 to study the dynamic recrystallization behavior of Nb-Ti microalloyed steel. The analysis of flow curve and the microstructure observation showed that the flow curve does not show the typical dynamic recrystallization characteristic, but the dynamic recrystallization has occurred under the condition of high temperature and low strain rate. The Arrhenius model of flow curves was used to calculate the deformation activation energy. The critical stress and strain were determined by using the method of work hardening and a constitutive equation. The reason for the high modeled values for critical stress was analyzed, and the quantitative relationship between the critical stress, strain and Z parameter was established so that the critical conditions equations of dynamic recrystallization were obtained: σ_c=0.335Z0.144,ε_c=0.005 9Z^0.079. The relationship between the strain at maximum softening rate and the deformation conditions was established by analyzing the θ-ε curves. Furthermore, the volume fraction of dynamic recrystallization was calculated based on these critical values and the results showed that the model has a good agreement with the data directly obtained from the flow curves.

Key words： Nb-Ti microalloyed steel dynamic recrystallization critical strain maximum softening rate

Published: 21 December 2018

CLC number:

TG11.7

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Yongji
	WU Guangliang
	WU Shangwen

Cite this article:

ZHANG Yongji,WU Guangliang,WU Shangwen. Kinetics and Critical Conditions for Initiation of Dynamic Recrystallization of Nb-Ti Microalloyed High Strength Steel[J]. Materials Reports, 2018, 32(22): 3900-3907.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.22.011 OR http://www.mater-rep.com/EN/Y2018/V32/I22/3900

1 Mirzadeh H, Najafizadeh A. Prediction of the critical conditions for initiation of dynamic recrystallization[J]. Materials & Design,2010,31(3):1174.
2 Zhao Baochun, Li Guiyan, Liu Fenglian, et al. Determination of critical conditions for initiation of dynamic recrystallization by new method[J]. Materials & Manufacturing Processes,2015,30(10):1235.
3 Puchi-Cabrera E S, Staia M H, Guérin J D, et al. Analysis of the work-hardening behavior of C-Mn steels deformed under hot-working conditions[J]. International Journal of Plasticity,2013,51(6):145.
4 Mirzadeh H. A simplified approach for developing constitutive equations for modeling and prediction of hot deformation flow stress[J]. Metallurgical & Materials Transactions A,2015,46(9):1.
5 Wang L, Liu F, Zuo Q, et al. Prediction of flow stress for N08028 alloy under hot working conditions[J]. Materials & Design,2013,47(9):737
6 Dehghan-Manshadi A, Barnett M R, Hodgson P D. Hot deformation and recrystallization of austenitic stainless steel: Part Ⅰ. Dynamic recrystallization[J]. Metallurgical & Materials Transactions A,2008,39(6):1359.
7 Ryan N D, Mcqueen H J. Flow stress, dynamic restoration, strain hardening and ductility in hot working of 316 steel[J]. Journal of Materials Processing Technology,1990,21(2):177.
8 Ryan N D, Mcqueen H J. Dynamic softening mechanisms in 304 austenitic stainless steel[J]. Canadian Metallurgical Quarterly,2013,29(2):147.
9 Poliak E I, Jonas J J. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization[J]. Acta Materialia,1996,44(1):127.
10 Solhjoo S. Determination of flow stress and the critical strain for the onset of dynamic recrystallization using a hyperbolic tangent function[J]. Materials & Design,2014,54(2):390.
11 Najafizadeh A, Jonas J J. Predicting the critical stress for initiation of dynamic recrystallization[J]. ISIJ International,2006,46(11):1679.
12 Cingara A, McQueen H J. New formula for calculating flow curves from high temperature constitutive data for 300 austenitic steels[J]. Journal of Materials Processing Technology,1992,36(1):31.
13 Shukla R, Das S K, Kumar B R, et al. An ultra-low carbon, thermomechanically controlled processed microalloyed steel: Microstructure and mechanical properties[J]. Metallurgical & Materials Tran-sactions A,2012,43(12):4835.
14 Bandyopadhyay P S, Kundu S, Ghosh S K, et al. Structure and properties of a low-carbon, microalloyed, ultra-high-strength steel[J]. Metallurgical & Materials Transactions A,2011,42(4):1051.
15 Opiela M. Effect of thermomechanical processing on the microstructure and mechanical properties of Nb-Ti-V microalloyed steel[J]. Journal of Materials Engineering & Performance,2014,23(9):3379.
16 Mirzadeh H, Cabrera J M, Prado J M, et al. Hot deformation behavior of a medium carbon microalloyed steel[J]. Materials Science & Engineering A,2011,528(10):3876.
17 Wei H L, Liu G Q, Xiao X, et al. Dynamic recrystallization beha-vior of a medium carbon vanadium microalloyed steel[J]. Materials Science & Engineering A,2013,573(3):215.
18 Wu G, Zhou C, Liu X. Dynamic recrystallization behavior and kine-tics of high strength steel[J]. Journal of Central South University,2016,23(5):1007.
19 Ferdowsi M R G, Nakhaie D, Benhangi P H, et al. Modeling the high temperature flow behavior and dynamic recrystallization kinetics of a medium carbon microalloyed steel[J]. Journal of Materials Engineering & Performance,2014,23(3):1077.
20 Mirzadeh H, Cabrera J M, Najafizadeh A. Modeling and prediction of hot deformation flow curves[J]. Metallurgical & Materials Tran-sactions A,2012,43(1):108.
21 Jr R S, et al. Nucleation and growth during recrystallization[J]. Materials Research,2005,8(3):225.
22 Sellars C M, Mctegart W J. On the mechanism of hot deformation[J]. Acta Metallurgica,1966,14(9):1136.
23 Sellars C M. Recrystallization of metals during hot deformation[J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences,1978,288(1350):147.
24 Poliak E I, Jonas J J. Initiation of dynamic recrystallization in constant strain rate hot deformation[J]. ISIJ International,2003,43(5):684.
25 Ebrahimi G R, Keshmiri H, Maldar A R, et al. Dynamic recrystallization behavior of 13%Cr martensitic stainless steel under hot wor-king condition[J]. Journal of Materials Science & Technology,2012,28(5):467.
26 Stewart G R, Elwazri A M, Yue S, et al. Modelling of dynamic recrystallisation kinetics in austenitic stainless and hypereutectoid steels[J]. Materials Science and Technology,2006,22(5):519.