6082-T6铝合金搅拌摩擦过程中动态再结晶方式对焊核区织构类型的影响

doi:10.11896/cldb.201904019

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5512KB)
Export: BibTeX | EndNote (RIS)

Abstract Herein we investigated the evolution of grain morphology, boundary characterization, misorientation distribution and texture at the retreating side, the very center and the advancing side of the nugget zone during friction stir welding of 6082-T6 aluminum alloys. The experiment was conducted by applying electron backscattered diffraction (EBSD)technique and with the assistance of orientation analysis software. It can be observed that intragranular dislocations stacked and reorganized, and small-angle subgrains formed at the retreating side of nugget zone during the welding process, owing to hot plastic deformation. Part of these formed small-angle grain boundaries subsequently transformed into large-angle grain boundaries by rotating, thus leading to "continuous dynamic recrystallization" and refinement of the coarse grain of base metal. Meanwhile, there formed (111) [110] shear texture, and many deformation substructures near (111)[110]orientation grains. Due to the superiority of(001)[100] cubic orientation substructures with respect to dislocation density and dislocation configuration, they would become the nucleus of "discontinuous dynamic recrystallization" under the action of welding thermal cycle and grow into (001) [100] cubic oriented grains. The rotary extrusion of the shoulder made the grains in nugget zone rotate along ND direction, and in consequence,(001) [110]rotated cube texture formed at the very center of nugget zone, while at the advancing side, finally formed (111) [110] shear texture and cube texture (001) [100].

Key words： 6082-T6 aluminum alloy friction stir welding dynamic recrystallization electron backscattered diffraction (EBSD)

Published: 11 March 2019

CLC number:

TG453.9

Fund:This work was financially supported by the National Natural Science Foundation of China (2012ZX04008011).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Liangliang
	WANG Xijing
	LIU Xiao

Cite this article:

ZHANG Liangliang,WANG Xijing,LIU Xiao. Effect of Dynamic Recrystallization Mode on Texture Type for the
Friction-Stir-Welded 6082-T6 Aluminum Alloy[J]. Materials Reports, 2019, 33(4): 665-669.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.201904019 OR http://www.mater-rep.com/EN/Y2019/V33/I4/665

Threadgill P L. Science & Technology of Welding & Joining,2007,12(4),357.2 Tamadon A, Pons D, Sued K, et al. Metals-Open Access Metallurgy Journal,2017,7(10),423.3 Ghosh A K, Raj R. Acta Metallurgica,1986,34(3),447.4 Yuan G C, Liang C L, Liu H, et al. Transactions of the China Welding Institution,2014,35(8),80(in Chinese).袁鸽成,梁春朗,刘洪,等.焊接学报,2014,35(8),80.5 Peng Y, Shen C, Zhao Y, et al. Rare Metal Materials & Engineering,2017,46(2),344.6 Xu W F, Liu J H, Chen D L. Journal of Alloys & Compounds,2011,509(33),84497 Yuan G C, Li Z H, Zhu Z H, et al. Materials Research and Application,2010,4(4),509(in Chinese)袁鸽成,李仲华,朱振华,等.材料研究与应用,2010,4(4),509.8 Suhuddin U F H R, Mironov S, Sato Y S, et al. Materials Science & Engineering A,2010,527(7-8),1962。9 Zhang C C, Chang B H, Tao J, et al. Transactions of the China Welding Institution,2013,34(3),57(in Chinese).张成聪,常保华,陶军,等.焊接学报,2013,34(3),57.10 Ke L M, Pan J L, Xing L, et al. Journal of Mechanical Engineering,2009,45(4),89(in Chinese).柯黎明,潘际銮,邢丽,等.机械工程学报,2009,45(4),89.11 Almoussawi M, Smith A J, Young A, et al. International Journal of Advanced Manufacturing Technology,2017,92(1-4),341.12 Pashazadeh H, Teimournezhad J, Masoumi A. International Journal of Advanced Manufacturing Technology,2016,88(5),1.13 Wang T, Zou Y, Liu X, et al. Materials Science & Engineering A,2016,671,7.14 Zhang F, Liu Y F, Li J L, et al. Foundry Technology,2017,38(5),1042(in Chinese).张放,刘艳芬,李继林,等.铸造技术,2017,38(5),1042.15 Huang K, Logé R E. Materials & Design,2016,111,548.16 Mcnelley T R, Swaminathan S, Su J Q. Scripta Materialia,2008,58(5),349.17 Yin P F, Zhang R, Xiong J T, et al. Acta Physica Sinica,2013,62(1),472(in Chinese).殷鹏飞,张蓉,熊江涛,等.物理学报,2013,62(1),472.18 Gratecap F, Girard M, Marya S, et al. International Journal of Material Forming,2012,5(2),99.19 Mironov S, Sato Y S, Kokawa H, et al. Acta Materialia,2011,59(14),5472.20 Fonda R W, Knipling K E. Science & Technology of Welding & Joining,2011,16(4),288.21 Canova G R, Kocks U F, Jonas J J. Acta Metallurgica,1984,32(2),211.22 Mao W M. Crystallographic texture and anisotropy of metallic materials, Science Press, China,2002(in Chinese).毛卫民.金属材料的晶体学织构与各向异性,科学出版社,2002.23 Etter A L, Mathon M H, Baudin T, et al. Scripta Materialia,2002,46(4),311.