基于油液在线监测的齿轮箱磨损趋势分析与研究

doi:10.11896/j.issn.1005-023X.2018.18.023

Abstract
Figure/Table
References
Related Citation (1)

Download:

Full Text ( PDF ) (3686KB)
Export: BibTeX | EndNote (RIS)

Abstract The wear debris in the lubricating oil carried a large amount of wear information of gearbox. Through the on-line monitoring sensor of wear debris, some important parameters of the wear debris (including size, quantity, production rate, etc) can be monitored, which can judge and speculate the wear state of gear box. At present, the accurate corresponding relation between the relative characteristic parameters of on-line monitoring wear debris and the wear state of the gear box had not been studied in depth. In this paper, firstly, the reliability of the wear debris sensor was verified by method of off-line detection, and then through the full life test of gear box carried out by independently developed test bench, the trend of wear debris quantity and production rate in diffe-rent sizes could judge the wear degree and development trend. Finally, the iron spectrum analysis and other means were used to further verify the predictive accuracy of gearbox failure made by on-line monitoring. The results showed that the wear debris information (including size, quantity, production rate) based on oil on-line monitoring can commendably judge and forecast the wear state of gear box.

Key words： on-line monitoring gear box wear debris quantity production rate iron spectrum analysis

Published: 18 October 2018

CLC number:

TG178

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIN Li
	DENG Chun
	JING Haoda
	SONG Peng
	GAO Jianhua
	WANG Haiyang
	ZHANG Xiangjun
	ZHANG Xiuli

Cite this article:

LIN Li,DENG Chun,JING Haoda, et al. Analysis and Research for Wear Trend of Gear Box Based on On-line Monitoring of Oil[J]. Materials Reports, 2018, 32(18): 3230-3234.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.18.023 OR http://www.mater-rep.com/EN/Y2018/V32/I18/3230

1 Wu S L. Malfunction monitoring and study of MW-levels wind turbine gearbox[D].Jinan: Shandong University,2012(in Chinese).
吴树梁.兆瓦级风电齿轮箱故障监测及分析[D].济南:山东大学,2012.
2 Xiao H L. The development of ferrography in China-some personal reflections[J].Tribology International,2005,38(10):904.
3 Li S C, Zuo H F, Zhang Y B. Wear debris recognition for oil on-line monitoring system[J].Optics and Precision Engineering,2009,17(3):589(in Chinese).
李绍成,左洪福,张艳彬.油液在线监测系统中的磨粒识别[J].光学精密工程,2009,17(3):589.
4 Peng Z, Goodwin S. Wear-debris analysis in expert systems[J].Tribology Letters,2001,11(3-4):177.
5 Du L, Zhe J. A high throughput inductive pulse sensor for online oil debris monitoring[J].Tribology International,2011,44(2):175.
6 Sheng S W. Monitoring of wind turbine gearbox condition through oil and wear debris analysis: A full-scale testing perspective[J].Tribology Transactions,2016,59(1):149.
7 Lei Y G, He Z J, Lin J, et al. Research advances of fault diagnosis technique for planetary gearboxes[J].Journal of Mechanical Engineering,2011,47(19):59(in Chinese).
雷亚国,何正嘉,林京,等.行星齿轮箱故障诊断技术的研究进展[J].机械工程学报,2011,47(19):59.
8 Liu X G. Study on fault diagnosis of heavy vehicles based on lubricating oil monitoring[D].Changchun: Changchun University of Science and Technology,2013(in Chinese).
刘学工.基于油液监测技术的重型车辆故障诊断研究[D].长春:长春理工大学,2013.
9 Hu Z H, Zhang X L, Song P, et al. The analysis of contamination and abrasive state in wind gear oil[J]. Lubrication Engineering,2018,43(1):92(in Chinese).
胡志红,张秀丽,宋鹏,等.风电齿轮箱润滑油污染物及油中磨粒状态分析[J].润滑与密封,2018,43(1):92.
10 Huo W. Research on online monitoring system of wear debris in wind turbine gearbox[D].Beijing: Beijing Jiaotong University,2014(in Chinese).
霍威.风电齿轮箱在线油液磨粒检测系统研究[D].北京:北京交通大学,2014.
11 Mi Lin, Feng Lingyu, Tan Wei.Project design of on-line condition monitoring system of wind turbine gearbox[J].Journal of Chongqing University of Technology,2016,30(2):109(in Chinese).
米林,封泠雨,谭伟.风电齿轮箱在线监测系统方案设计[J].重庆理工大学学报,2016,30(2):109.
12 Chen Z, Shao Y. Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth[J].Enginee-ring Failure Analysis,2012,18(8):2149.
13 Feng W, Chen M J, He S Z. Oil on-line monitoring sensor technology[J].Lubrication Engineering,2012,37(1):99(in Chinese).
冯伟,陈闵杰,贺石中.油液在线监测传感器技术[J].润滑与密封,2012,37(1):99.
14 Peng Z X. An integrated intelligence system for wear debris analysis[J].Wear,2002,252:730.
15 Kumar R, Prakash B, Sethuramiah A. A systematic methodology to characterize the running-in and steady-state wear processes[J].Wear,2002,252:445.
16 Fan B, Li B, Feng S, et al. Modeling and experimental investigations on the relationship between wear debris concentration and wear rate in lubrication systems[J].Tribology International,2016,109:114.
17 Plumlee K, Schwartz C J. Investigating UHMWPE wear mechanisms by decomposing wear debris distributions[J].Wear,2011,271(9):2208.
18 Greco A, Sheng S, Keller J. Material wear and fatigue in wind turbine systems[J].Wear,2013,302:1583.
19 Fu Q. Research of ferrography-based wear state assessment on marine gearbox[D].Harbin: Harbin Institute of Technology,2013(in Chinese).
付强.基于铁谱分析的船用齿轮箱磨损状态评估方法研究[D].哈尔滨:哈尔滨工业大学,2013.