电弧增材制造技术及其在TC4钛合金中的应用研究进展

doi:10.11896/j.issn.1005-023X.2018.11.016

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2714KB)
Export: BibTeX | EndNote (RIS)

Abstract Additive manufacturing as a novel technology have developed since the middle of 1980s. More and more people focus on this technology since it can produce complex structures quickly and accurately. Wire and arc additive manufacturing technology adopts arc as heat source, and deposits the materials layer by layer. High deposition rates, low material and equipment costs, and the advantages in manufacturing large and complexity components that make wire and arc additive manufacturing technology widely used in aerospace industry, automobiles and ships. TC4 has become the most widely used titanium alloy due to the excellent comprehensive properties. The properties such as low thermal conductivity, high strength and high chemical activity of TC4, which make it difficult to fabricate the components by traditional manufacturing technologies. Therefore, the TC4 is manufactured by WAAM. Ho-wever, the typical macrostructure of the WAAMed components is the epitaxially grown columnar grain, which leads to anisotropy in its mechanical properties. In present work, the development history of wire and arc additive manufacturing technology is introduced. Combining its characteristics and the research status at home and abroad, the study on the microstructure and mechanical properties of TC4 titanium alloy manufactured by wire and arc additive manufacturing technology is introduced.

Key words： wire and arc additive manufacturing TC4 titanium alloy macro/microstructure mechanical properties

Published: 20 July 2018

CLC number:

TG146

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Haiou
	WANG Jian
	ZHOU Yinghui
	WANG Chong
	LIN Xin

Cite this article:

YANG Haiou,WANG Jian,ZHOU Yinghui, et al. Wire and Arc Additive Manufacturing Technology and Its Application in TC4 Titanium Alloy: a Review[J]. Materials Reports, 2018, 32(11): 1884-1890.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.11.016 OR http://www.mater-rep.com/EN/Y2018/V32/I11/1884

1 Xiong J. Forming characteristics in multi-layer single-bead GMA additive manufacturing and control for deposition dimension[D].Harbin: Harbin Institute of Technology,2014(in Chinese).
熊俊.多层单道GMA增材制造成形特性及熔敷尺寸控制[D].哈尔滨:哈尔滨工业大学,2014.
2 Lutjering G, Williams J C. Titanium[M].2nd ed.Berlin:Springer,2007.
3 Leyens C, Peters M. Titanium and titanium alloys[M].Wiley Online Library,2003.
4 Dai S J, Zhu Y T, Chen F. Present status and processing methods of novel β titanium alloys for biomedical applications[J]. Journal of Chongqing University of Technology(Natural Science),2016,30(4):27(in Chinese).
戴世娟 ,朱运田, 陈锋. 新型医用β钛合金研究的发展现状及加工方法[J].重庆理工大学学报(自然科学版),2016,30(4):27.
5 Brandl E, Michailov V, Viehweger B, et al. Deposition of Ti-6Al-4V using laser and wire, part Ⅱ: Hardness and dimensions of single beads[J].Surface & Coatings Technology,2011,206(6):1130.
6 Mughal M P, Fawad H, Mufti R A. Three-dimensional finite-element modelling of deformation in weld-based rapid prototyping[J].Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2006,220(6):875.
7 Li C, Zhu S, Shen C D, et al.Present state and development trend of welding rapid forming technology[J].China Surface Engineering,2009,22(3):7(in Chinese).
李超,朱胜,沈灿铎,等.焊接快速成形技术的研究现状与发展趋势[J].中国表面工程,2009,22(3):7.
8 Song Y A, Park S, Choi D, et al. 3D welding and milling: Part Ⅰ—A direct approach for freeform fabrication of metallic prototypes[J].International Journal of Machine Tools & Manufacture,2005,45(9):1057.
9 Ralph B. Method of making decorative articles: US,1533300[P].1925-04-14.
10 Baufeld B, Biest O, Gault R. Microstructure and mechanical properties of Ti-6Al-4V components fabricated by shaped metal deposition[C]∥19th AeroMat Conference & Exposition. Austin,2008.
11 Ribeiro F. 3D printing with metals[J].Computing & Control Engineering Journal,1998,9(1):31.
12 Ribeiro F, Norrish J. Making components with controlled metal de-position[C]∥International Symposium on Industrial Electronics. Guimaraes, Portugal,1997:831.
13 Kassmaul K, Schoch F W, Lucknow H. High quality large components ‘shape welded’ by a SAW process[J].Welding Journal,1983,62(9):17.
14 Xun J, Xue Y G, Chen H, et al. Status and development prospects of forming control technology in arc-based additive manufacturing[J].Electric Welding Machine,2015,45(9):45(in Chinese).
熊俊,薛永刚,陈辉,等.电弧增材制造成形控制技术的研究现状与展望[J].电焊机,2015,45(9):45.
15 Guo C B, Hu L R, Hu D D, et al. 3D Printing technology and recent application in military fields[J].Tactical Missile Technology,2013,6(6):1(in Chinese).
郭朝邦,胡丽荣,胡冬冬,等.3D打印技术及其军事应用发展动态[J].战术导弹技术,2013,6(6):1.
16 Irving B. How those million-dollar research projects are improving the state of the art of welding[J].Welding Journal,1993,72(6):61.
17 Doyle T E. Shape melting technology[C]∥Proceedings of the Third International Conference on Desktop Manufacturing: Making Rapid Prototyping Pay Back.1991.
18 Doyle T E, Ryan P M. Method and apparatus for automatic vapor cooling whenshape melting a component: US,4857694[P].1989-08-15.
19 Wang H, Kovacevic R. Rapid prototyping based on variable polarity gas tungsten arc welding for a 5356 aluminium alloy[J].Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture,2001,215(11):1519.
20 Zhang Y M, Chen Y, Li P, et al. Weld deposition-based rapid prototyping:A preliminary study[J].Journal of Materials Processing Technology,2003,135(2):347.
21 Zhang Y M, Chen Y, Li P, et al. Automated system for welding-based rapid prototyping[J].Mechatronics,2002,12(1):37.
22 Spencer J D, Dickens P M, Wykes C M. Rapid prototyping of the metal parts by three-dimensional welding[J].Processings of the institution of mechanical engineers, Part B: Journal of Engineering Ma-nufacture,1998,212(3):175.
23 Baufeld B, Biest O. Effect of deposition parameters on mechanical properties of shape metal deposition parts[J].Processing of the Institution of the Mechanical Engineers, Part B: Journal of Engineering Manufacture,2012,226(1):126.
24 Wu B, Pan Z, Ding D, et al. The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy[J].Journal of Materials Processing Technology,2018,258:97.
25 Shen C, Pan Z, Cuiuri D, et al. Influences of deposition current and interpass temperature to the Fe₃Al-based iron aluminide fabricated using wire-arc additive manufacturing process[J].International Journal of Advanced Manufacturing Technology,2016,88(5-8):1.
26 Ma Y, Cuiuri D, Hoye N, et al. The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding[J].Materials Science & Engineering A,2015,631:230.
27 Ding D, Pan Z, Cuiuri D, et al. A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)[J].Robotics & Computer-Integrated Manufacturing,2015,31:101.
28 Ding D, Pan Z, Cuiuri D, et al. Adaptive path planning for wire-feed additive manufacturing using medial axis transformation[J].Journal of Cleaner Production,2016,133:942.
29 Wang J H. Research on shaped metal deposition of 2219 aluminum alloy by AC-TIG welding[D].Harbin: Harbin Institute of Technology,2015(in Chinese).
王计辉.2219铝合金交流TIG堆焊成型技术研究[D].哈尔滨:哈尔滨工业大学,2015.
30 Ding D P. Astudy on welding robot based rapid prototyping system and the forming principles[D].Wuhan: Huazhong University of Science and Technology,2005(in Chinese).
丁冬平.基于焊接机器人的熔焊成形系统及成形规律的研究[D].武汉:华中科技大学,2005.
31 Geng H, Xiong J, Huang D, et al. A prediction model of layer geometrical size in wire and arc additive manufacture using response surface methodology[J].International Journal of Advanced Manufactu-ring Technology,2017,93(1-4):175.
32 Hu R H. Research on the planning of deposit trajectory for welding prototyping based on TIG building-up technology[D].Nanchang: Nanchang University,2007(in Chinese).
胡瑢华.基于TIG堆焊技术的熔焊成型轨迹规划研究[D].南昌:南昌大学,2007.
33 Du N C. Study on metal rapid prototyping based on arc welding robot[D].Tianjin: Tianjin University,2009(in Chinese).
杜乃成.弧焊机器人金属快速成形研究[D].天津:天津大学,2009.
34 Dickens P M, Pridham M S, Cobb R C, et al. Rapid prototyping using 3-D welding[C]∥Proceedings of the 3rd Symposium Solid Freedom Fabrication. Austin, Texas,1992:280.
35 Kwak Y M, Doumanidis C. Geometry regulation of material deposition in near net shape manufacturing by thermally scanned welding[J].Journal of Manufacturing Processes,2002,4(1):28.
36 Ouyang J H, Wang H, Kovacevic R. Rapid prototyping of 5356-aluminum alloy based on variable polarity gas tungsten arc welding: Process control and microstructure[J].Materials & Manufacturing Processes,2002,17(1):103.
37 Kazanas P, Deherkar P, Almeida P, et al. Fabrication of geometrical features using wire and arc additive manufacture[J].Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,2012,226(6):1042.
38 Zhang H O, Xong X H, Wang G L, et al. Direct manufacturing technology of metal parts by hybrid plasma deposition shaping and milling finishing[J]. China Mechanical Engineering,2005,16(20):1863(in Chinese).
张海鸥,熊新红,王桂兰,等.等离子熔积成形与铣削光整复合直接制造金属零件技术[J].中国机械工程,2005,16(20):1863.
39 Song Y A, Park S, Chae S W. 3D welding and milling: Part Ⅱ—Optimization of the 3D welding process using an experimental design approach[J].International Journal of Machine Tools & Manufacture,2005,45(9):1063.
40 Baufeld B, Biest O, Gault R. Microstructure of Ti-6Al-4V specimens produced by shaped metal deposition[J].International Journal of Materials Research,2009,100(11):1536.
41 Baufeld B, Biest O. Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition[J].Science and Technology of Advanced Materials,2009,10(1):015008.
42 Baufeld B, Biest O, Gault R, et al. Manufacturing Ti-6Al-4V components by shaped metal deposition:Microstructure and mechanical properties[C]∥IOP conference Series: Materials Science and Engineering. IOP Publishing,2011.
43 Baufeld B, Brandl E, Biest O. Wire based additive layer manufactu-ring: Comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition[J].Journal of Materials Processing Technology,2011,211(6):1146.
44 Brandl E, Baufeld B, Leyens C, et al. Additive manufactured Ti-6Al-4V using welding wire: Comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications[J].Physics Procedia,2010,5(Part B):595.
45 Baufeld B, Biest O, Gault R. Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties[J].Materials & Design,2010,31(1):S106.
46 Wang F, Williams S, Colegrove P, et al. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V[J].Metallurgical and Materials Transactions A,2013,44(2):968.
47 Lin J J, Lv Y H, Liu Y X, et al. Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing[J].Materials & Design,2016,102:30.
48 Liu N. Research on Ti-6Al-4V shaped metal deposition by TIG wel-ding with wire[D]. Harbin: Harbin Institute of Technology,2013(in Chinese).
刘宁.TC4钛合金TIG填丝堆焊成型技术研究[D].哈尔滨:哈尔滨工业大学,2013.
49 Martina F, Williams S W, Colegrove P, et al. Improved microstructure and increased mechanical properties of additive manufacture produced Ti-6Al-4V by interpass cold rolling[C]∥International Solid Freeform Fabrication Symposium.2013.
50 Martina F, Roy M, Colegrove P, et al. Residual stress reduction in high pressure interpass rolled wire+arc additive manufacturing Ti-6Al-4V components[C]∥International Solid Freeform Fabrication Symposium.2014.
51 Martina F. Investigation of methods to manipulate geometry, microstructure and mechanical properties in titanium large scalewire+arc additive manufacturing[D].Bedfordshire:Cranfield University,2014.
52 Xie Y, Gao M, Wang F, et al. Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V[J].Materials Science & Engineering A,2018,709:265.
53 Zhang J, Wang X, Paddea S, et al. Fatigue crack propagation beha-viour in wire+arc additive manufactured Ti-6Al-4V: Effects of microstructure and residual stress[J].Materials & Design,2016,90:551.
54 Bermingham M J, Kent D, Zhan H, et al. Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions[J].Acta Materialia,2015,91:289.