等规聚丙烯注塑成型冷却固化分子机制研究<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.020.031

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2478KB)
Export: BibTeX | EndNote (RIS)

Abstract In response to the micro-mechanism of the liquid-solid phase transition and macromolecular structure evolution of the isotropic polypropylene (iPP) material during the injection molding cooling process, the macromolecular solidification and confi-guration evolution mechanism was studied based on the molecular dynamic simulation method. The different iPP cell systems were built, of which the polymerization degree were 24, 36, 51, 72, 120 and chain number were 36, 24 and 16, successively. The energy initialization was performed using the smart minimization method followed by the simulated annealling (SA) method. Coupling with the periodic boundary conditions, COMPASS force field and the velocity-verlet algorithm, the cooling simulation was launched. The results indicate that the glass transition temperature (T_g) of each simulated cell coincides well with the Flory’s free volume theory. The bond length as well as bond angle presents a Gaussian distribution, the lower the temperature, the more concentrated distribution of them, agreeing with the cooling free relax process of the macromolecular. The 〈h〉 and 〈R_g〉 of the polymer chains are all increasing with the polymerization degree. 〈h〉 shows a Gaussian distribution during the declining of the temperature, while 〈R_g〉 exhibits a shrinkage trend, which indicates the macromolecular chains configuration tangle again during this stage from the orientated phase, and another crystallize phase is taken place. The migration and solidification rate give a negative correction with the increasing polymerization degree. And the diffusion coefficient exhibits steeper declining trend with higher polymerization degree when the temperature is above the glass transition temperature.

Key words： isotropic polypropylene injection molding cooling solidification molecular mechanism

Published: 05 May 2018

CLC number:

TQ320

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CAO Wenhua
	XIN Yong
	LIU Donglei
	YU Xuan

Cite this article:

CAO Wenhua,XIN Yong,LIU Donglei, et al. Macromolecular Solidification Mechanism of the Isotropic Polypropylene (iPP) Material During the Injection Cooling Stage[J]. Materials Reports, 2017, 31(20): 152-157.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.020.031 OR http://www.mater-rep.com/EN/Y2017/V31/I20/152

1 Tashiro K, Sasaki S. Structural changes in the ordering process of polymers as studied by an organized combination of the various measurement techniques [J]. Prog Polym Sci, 2003,28(3):451.
2 Hobbs J K, Farrance O E, Kailas L. How atomic force microscopy has contributed to our understanding of polymer crystallization [J]. Polymer, 2009,50(18):4281.
3 Mandelkern L. Crystallization kinetics of homopolymers: overall crystallization: A review [J]. Biophys Chem, 2004,112(2-3):109.
4 Schick C. Differential scanning calorimetry (DSC) of semicrystalline polymers [J]. Anal Bioanal Chem, 2009,395(6):1589.
5 Wang Z G, Benjamin S. Probing the early stages of melt crystallization in polypropylene by simultaneous small-and wide-angle X-ray scattering and laser light scatterin [J]. Macromolecules, 2000,33(3):978.
6 Sanmartín S, Ramos J, Vega J F, et al. Strong influence of branc-hing on the early stage of nucleation and crystal formation of fast cooled ultralong n-alkanes as revealed by computer simulation [J]. Eur Polym J, 2014,50(1):190.
7 Yi P, Rutledge G C. Molecular simulation of crystal nucleation in n-octane melts [J]. J Chem Phys, 2009,131(13):134902.
8 Koyama A, Yamamoto T, Fukao K, et al. Molecular dynamics studies on polymer crystallization from a stretched amorphous state [J]. J Macromol Sci Part B, 2003,42(3-4):821.
9 Sultanov V I, Atrazhev V V, Dmitriev D V, et al. Molecular dynamics simulation of chains mobility in polyethylene crystal [J]. Jetp Lett, 2014,98(5):332.
10Yamamoto T. Molecular dynamics of polymer crystallization revisited: Crystallization from the melt and the glass in longer polyethylene [J]. J Chem Phys, 2013,139(5):054901.
11Wang J, Zhu X, Lu X, et al. On structures and properties of polyethylene during heating and cooling processes based on molecular dynamics simulations [J]. Comput Theor Chem, 2015,1052:26.
12Koyama A, Yamamoto T, Fukao K, et al. Molecular dynamics si-mulation of polymer crystallization from an oriented amorphous state[J]. Phys Rev E, 2002,65(5 Pt 1):8675.
13Yamamoto T, Sawada K. Molecular-dynamics simulation of crystallization in helical polymers [J]. J Chem Phys, 2005,123(23):234906.
14Wei C. Adsorption of an alkane mixture on carbon nanotubes: Selectivity and kinetics [J]. Phys Rev B Condensed Matter, 2009,80(8):085409.
15Thompson P A, Robbins M O. Shear flow near solids: Epitaxial order and flow boundary conditions [J]. Phys Rev A, 1990,41(12):6830.
16Bunte S W, Sun H. Molecular modeling of energetic materials: The parameterization and validation of nitrate esters in the COMPASS force field [J]. J Phys Chem B, 2000,104(11):2477.
17Fox T G, Flory P J. Second-order transition temperatures and rela-ted properties of polystyrene. I. Influence of molecular weight [J]. J Appl Phys, 1950,21(6):581.
18Fox T G, Flory P J. The glass temperature and related properties of polystyrene. Influence of molecular weight [J]. J Polym Sci, 1954,14(75):315.
19Wada Y, Hotta Y, Suzuki R. Glass transition and relaxation in the amorphous phase of isotactic polypropylene [J]. J Polym Sci Part C Poly Symp, 2007,23(2):583.
20Waheed N, Ko M J, Rutledge G C. Molecular simulation of crystal growth in long alkaness [J]. Polymer, 2005,46(20):8689.
21Wang Q, Keffer D J, Nicholson D M. A coarse-grained model for polyethylene glycol polymer [J]. J Chem Phys, 2011,135(21):214903.
22Tseng H C, Chang R Y, Wu J S. Molecular structural property and potential energy dependence on none quilibrium-thermodynamic state point of liquid n-hexadecane under shear [J]. J Chem Phys, 2011,134(4):31.
23Mohammad A, Eckhard S. Molecular dynamics investigation of the thermo-responsive polymer poly (N-isopropylacrylamide) [J]. Macromol Theor Simul, 2012,21(2):106.