铸造Fe-C-B耐磨合金增韧研究与进展<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.015.010

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1312KB)
Export: BibTeX | EndNote (RIS)

Abstract Fe-C-B alloy, with excellent wear resistance and cost-effectiveness, has the potential to become the new generation of wear-resistant materials, whose broad application is limited due to its relatively low toughness caused by meshed boride. The progress of research on Fe-C-B alloy toughening mechanism is reviewed, including adjustment to boron content, heat treatment under high temperature, alloying and modification. It can be suggested that alloys with boron content ranging in 2.0%—4.0% has good performance, as the hardness reaches 60HRC and the impact toughness is about 6 J/cm². High temperature heat treatment at 1 000—1 050 ℃ is favorable for alloy toughening. Also, toughness can be improved to a certain extent through alloying or modification. In-depth studies on the toughening mechanism of Fe-C-B alloy are necessary for further improvement of toughness by combining various toughening methods.

Key words： Fe-C-B alloy toughening high temperature heat treatment alloying modification wear resistance

Published: 04 May 2018

CLC number:

TG142.7

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MU Nan
	LU Jing
	ZHOU Haiming
	MIN Xiaobing
	LUO Fenghua

Cite this article:

MU Nan,LU Jing,ZHOU Haiming, et al. Research and Development of the Toughening of Cast Fe-C-B Wear-resistant Alloys[J]. Materials Reports, 2017, 31(15): 68-74.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.015.010 OR http://www.mater-rep.com/EN/Y2017/V31/I15/68

1 本溪钢铁公司第一炼钢厂. 硼钢[M]. 北京:冶金工业出版社,1977.
2 Zhang Z P, Wang X M. The solutions to preventing and removing boron brittleness of boron structural steel[J]. Water Conservancy Electric Power Machinery,2002,24(5):44(in Chinese).
张志璞,王秀敏. 防止和消除硼结构钢“硼脆”的途径[J]. 水利电力机械,2002,24(5):44.
3 黄积荣,等编译. 耐磨与耐热合金[M]. 天津:河北工学院情报研究室,1994.
4 丹东518拖拉机配件厂,沈阳机电学院,沈阳拖拉机厂. 孕育硼磷铸铁[J]. 铸工,1976(5):21.
5 杨景祥,赵博彦,刘青山. 硼贝氏体耐磨球墨铸铁[J]. 铸造,1980(6):32.
6 Egorov M D, Sapozhnikov Y L, Shakhnazarov Y V. Effect of car-bon content on the structure, hardness, and thermal stability of boron-chromium cast steels[J]. Metal Sci Heat Treatment,1989,31:387.
7 Aso S, Tagami M, Goto S. Mechanical properties of Fe-Cr-C-B cast alloys[J]. J Jpn Institute of Metals,1992,56(6):707.
8 Lakeland K D, Graham E, Heron A. Mechanical properties microstructures of a series of Fe-C-B alloys[D]. Brisbane:University of Queensland,1992.
9 Guo C Q, Gao S Z. New Fe-base wear-resistant material FCB alloys[J]. Foundry,2004,53 (10):761(in Chinese).
郭长庆,高守忠. 新型铁基耐磨材料FCB合金[J]. 铸造,2004,53(10):761.
10 Guo C Q, Kelly P M. Boron solubility in Fe-Cr-B cast irons[J]. Mater Sci Eng A,2003,352:40.
11 Yi D W, Xing J D, Ma S Q, et al. Effect of rare earth-aluminium additions on the microstructure of a semisolid low carbon Fe-B cast alloy [J]. Mater Sci Technol,2011,27(10):1518.
12 Liu Z J, Li L C, Su Y H, et al. Effect of boron on microstructure and properties of high-boron iron-based alloy by plasma transferred arc[J]. Trans China Welding Institution,2012,33(1):45(in Chinese).
刘政军,李乐成,苏允海,等. 硼对等离子熔覆高硼铁基合金组织和性能的影响[J]. 焊接学报,2012,33(1):45.
13 Liu J, Li Z H, Cen Q H, et al. Effect of electric pulse on solidification structure of primary phase in hypereutectic Fe-C-B alloy[J]. Trans Mater Heat Treatment,2013,34 (9):1(in Chinese).
刘谨,黎振华,岑启宏,等. 脉冲电流对过共晶Fe-C-B合金初生相的影响[J]. 材料热处理学报,2013,34(9):1.
14 Lentz J, Röttger A, Theisen W. Solidification and phase formation of alloys in the hypoeutectic region of the Fe-C-B system[J]. Acta Mater,2015,99:119.
15 Lentz J, Röttger A, Theisen W. Mechanism of the Fe₃(B,C) and Fe₂₃(C,B)₆ solid-state transformation in the hypoeutectic region of the Fe-C-B system[J]. Acta Mater,2016,119:80.
16 Sergueeva A V, BranaganD J, Mukherjee A K. Microstructure/properties relationship in Fe- based nanomaterials[J]. Mater Sci Eng A,2008,493:237.
17 Vecchio K S, Cheney J, Khalifa H. Amorphous alloy materials:US,8986469 B2[P].2015-03-24.
18 Cai Y X, Li F. Infuence of boron on microstructure and properties of casting Fe-0.4C-B alloy[J]. China Foundry Machinery Technol,2015,2:7(in Chinese).
蔡云秀,李飞. 硼对铸态Fe-0.4C-B合金组织与性能的影响[J]. 中国铸造装备与技术, 2015,2:7.
19 He Z Y, Liu M H, Zhao G R, et al. Study on effect of boron on properties of Fe-0.77C-B alloy[J]. Foundry Technol,2009,30(3):352(in Chinese).
何正员,刘美红,赵国荣,等. 硼对Fe-0.77C-B合金性能的影响[J]. 铸造技术,2009,30(3): 352.
20 Zhao G R, Li Z H, Liu M H, et al. Study on wear resistance of Fe-C-B alloy[J]. Foundry Technol,2016,37(7):1319(in Chinese).
赵国荣,黎振华,刘美红,等. Fe-C-B合金耐磨性能的研究[J]. 铸造技术,2016,37(7):1319.
21 Liu Z L, Li Y X, Chen X, et al. Effect of boron and carbon content on microstructure and properties of high boron iron-based alloy[J]. Iron Steel,2007,42(6):78(in Chinese).
刘仲礼,李言祥,陈祥,等. 硼、碳含量对高硼铁基合金组织和性能的影响[J]. 钢铁,2007, 42(6):78.
22 Song X D. Research on the structures, properties and application of the high boron cast wear-resistant alloy[D]. Xi’an: Chang’an University,2008(in Chinese).
宋绪丁. 高硼铁基系列铸造耐磨合金研制及其应用研究[D]. 西安:长安大学,2008.
23 Bao Y B, Ye X C, Chen C H, et al. Effect of boron content and heat treatment on wear resistance of Fe-based wear-resistant alloy[J]. Hot Working Technol,2015,44(20):200(in Chinese).
包蕴斌,叶旭初,陈川辉,等. 硼含量及热处理对铁基耐磨合金摩擦磨损性能的影响[J]. 热加工工艺,2015,44(20):200.
24 Yan J, Cen Q H, Jiang Y H, et al. Effect of boron content on microstructure and mechanical properties of as-cast high-boron middle-carbon alloy steels[J]. Trans Mater Heat Treatment, 2013,34(6):34(in Chinese).
严军,岑启宏,蒋业华,等. 硼含量对高硼中碳合金钢铸态组织与力学性能的影响[J]. 材料热处理学报,2013,34(6):34.
25 Wang Z H, Wan G L, He D Y, et al. Microstructures and wear resistance of Fe-Cr-B-Chardfacing alloys[J]. J Mater Eng,2014(9):57(in Chinese).
王智慧,万国力,贺定勇,等. Fe-Cr-B-C堆焊合金的组织与耐磨性[J]. 材料工程,2014(9):57.
26 Li M S, Fu S L, Xu W D, et al. Valence electron structure of Fe₂B phase and its eigenbrittleness[J]. Acta Metall Sin,1995,31 (5):201(in Chinese).
李木森,傅绍丽,徐万东,等. Fe₂B相价电子结构及其本质脆性[J]. 金属学报,1995,31 (5):201.
27 Fu H G, Jiang Z Q. A study of abrasion resistant cast Fe-B-C alloy[J]. Acta Metall Sin,2006,42(5):545(in Chinese).
符寒光,蒋志强. 耐磨铸造Fe-B-C 合金的研究[J]. 金属学报,2006,42(5):545.
28 赵国荣. Fe-C-B合金组织与性能基础研究[D]. 昆明:昆明理工大学,2008.
29 Zhao P. Effect of annealing on the microstructure of high boron steel containing Zr[J]. J Xihua University,2010,29(2):78(in Chinese).
赵平. 退火处理对含Zr高硼钢微观组织的影响[J]. 西华大学学报,2010,29(2):78.
30 Shi W X, Fu H G, Jiang Z Q, et al. Effect of heat treatment on microstructure and property of high boron and low carbon cast steel[J]. Iron Steel Vanadium Titanium,2007,28(4):56(in Chinese).
师文校,符寒光,蒋志强,等. 热处理对高硼低碳铸钢显微组织和性能的影响[J]. 钢铁钒钛, 2007,28(4):56.
31 Dong Z W, Wei S Z, Zhang G S, et al. Study on microstructure and properties of high carbon boron steel[J]. Foundry Technol,2008,29(11):1481(in Chinese).
董占武,魏世忠,张国赏,等. 高碳硼钢的组织和性能研究[J]. 铸造技术,2008,29(11):1481.
32 Cen Q H, Zhang H B, Fu H G. Effect of heat treatment on structure and wear resistance of high chromium cast steel containing boron[J]. J Iron Steel Res Int,2014,21(5):532.
33 张海滨,符寒光,雷永平. 热处理对Fe-Cr-B合金显微组织和硬度的影响[C]∥第十二届全国铸造年会暨2011中国铸造活动周论文集. 北京:中国机械工程学会,2011.
34 Li F, Li Z H. Study on improvement of hard phase morphology and properties of hypoeute-ctic Fe-C-B alloy[J]. J Alloys Compd,2014,587:267.
35 Fu H G, Song X D, Lei Y P, et al. Effect of homogenization tempe-rature on microstructure and mechanical properties of low-carbon high-boron cast steel[J]. Metals Mater Int,2009,15(3):345.
36 Yang J, Wang J H, Fu H G, et al. Influence of heat treatment on wear resistant of high boron casting steel[J]. Foundry Technol,2006,27(10):1079(in Chinese).
杨军,王晋华,符寒光,任大忠. 热处理对高硼铸钢耐磨性的影响研究[J]. 铸造技术,2006, 27(10):1079.
37 Chen X, Li Y X. Effect of heat treatment on microstructure and mechanical properties of high boron white cast iron[J]. Mater Sci Eng A,2010,528:770.
38 Du Z Z, Li Y, Fu H G, et al. Effects of quenching process on microstructure and hardness of Fe-Cr-B alloy[J]. Trans Mater Heat Treatment, 2014,35(S2):50(in Chinese).
杜忠泽,李颖,符寒光,等. 淬火工艺对Fe-Cr-B合金显微组织和硬度的影响[J]. 材料热处理学报,2014,35(S2):50.
39 Fu H G, Song X D, Liu H M, et al. Effect of heat treatment on microstructures and properties of Fe-B-C alloy[J]. Rare Metal Mater Eng,2010,39(6):1125(in Chinese).
符寒光,宋绪丁,刘海明,等. 热处理对Fe-B-C合金显微组织和性能的影响[J].稀有金属材料与工程,2010,39(6):1125.
40 Gu J, Fu H G, Lei Y P. Influence of heat treatment on structure and property of Fe-5Cr-1.4B alloy[J]. Modern Cast Iron,2013(4):78(in Chinese).
顾建,符寒光,雷永平. 热处理对Fe-5Cr-1.4B合金组织和性能的影响[J]. 现代铸铁,2013(4):78.
41 Yu Z, Fu H G, Du Z Z, et al. Effect of quenching treatment on microstructure and property of high boron high speed steel roll [J]. Trans Mater Heat Treatment,2013,34 (4):138(in Chinese).
于震,符寒光,杜忠泽,等. 淬火对高硼高速钢轧辊材料组织和性能的影响[J]. 材料热处理学报,2013,34(4):138.
42 Hua X Y, Guo C Q, Han J W, et al. Effects of cooling rate on microstructure of Fe-Cr-B alloy[J]. Trans Mater Heat Treatment,2015,36(S1):47(in Chinese).
花晓燕,郭长庆,韩继炜,等. 冷却速度对Fe-Cr-B合金显微组织的影响[J]. 材料热处理学报,2015,36(S1):47.
43 Feng X L, Jiang Z Q, Fu H G. Effect of heat treatment on microstructure and mechanical properties of cast Fe-B-C alloy[J]. J Aeronautical Mater,2007,27(5):26(in Chinese).
冯锡兰,蒋志强,符寒光. 热处理对Fe-B-C合金组织和力学性能影响[J]. 航空材料学报,2007,27(5):26.
44 Zhang Y L. Study of wear resistance of high boron low carbon cast alloy[J]. Foundry, 2014, 63(12):1273(in Chinese).
张艳玲. 耐磨高硼低碳铸造合金的研究[J]. 铸造,2014,63(12):1273.
45 Wu Z W, Fu H G, Zhou Q, et al. Application of high boron cast alloy to lining plate of mixer lining[J]. Mater Process,2006,37(9):61(in Chinese).
吴占文,符寒光,周强,等. 高硼铸造合金在搅拌机衬板上的应用[J]. 工程机械,2006,37(9):61.
46 Li R L, Cen Q H, Li Z L, et al. Effect of quenching cooling ways on microstructure and high temperature wear performance of high boron medium carbon alloy[J]. Tribology,2013,33(2):135 (in Chinese).
李日良,岑启宏,李祖来,等. 淬火冷却方式对高硼中碳合金组织和高温磨损性能的影响[J]. 摩擦学学报,2013,33(2):135.
47 Ma S Q, Xing J D, Liu G F, et al. Effect of chromium concentration on microstructure and properties of Fe-3.5B alloy[J]. Mater Sci Eng A,2010,527(26):6800.
48 Wan S L, Cui L, He D Y, et al. Effect of chromium on microstructure and wear resistance of Fe-Cr-B-C hardfacing alloys after heat treatment[J]. Trans Mater Heat Treatment, 2015,36(10):224(in Chinese).
汪圣林,崔丽,贺定勇,等. Cr对 Fe-Cr-B-C系堆焊合金热处理后的组织和磨损性能的影响[J]. 材料热处理学报,2015,36(10):224.
49 Li Y. Effect of chromium content on microstructure and properties of Fe-Cr-B alloy[D]. Xi’an: Xi’an University of Architecture and Technology,2014(in Chinese).
李颖. 铬对Fe-Cr-B合金显微组织和性能的影响[D]. 西安:西安建筑科技大学,2014.
50 Röttger A, Lentz J, Theisen W. Boron-alloyed Fe-Cr-C-B tool steels-Thermodynamic calculations and experimental validation[J]. Mater Des,2015,88:420.
51 Yan J. Research on as-cast microstructure and mechanical properties of high boron wear resi- stant alloy steel[D]. Kunming: Kunming University of Science and Technology,2013(in Chinese).
严军. 高硼耐磨合金钢铸态组织与力学性能的研究[D]. 昆明:昆明理工大学,2013.
52 Deng P K, Li Z H, et al. Effect of chromium content on microstructure and mecha- nical properties of Fe-C-B hypoeutectic alloys [J]. Trans Mater Heat Treatment, 2013,34(12):67(in Chinese).
邓培凯,黎振华,岑启宏,等. 铬对亚共晶Fe-C-B合金组织与力学性能的影响[J]. 材料热处理学报,2013,34(12):67.
53 Goldshtein Y E, Mizin V G. Some peculiarities of the structure of high boron steels[J] Metal Sci Heat Treatment,1989,30(7):479.
54 Jiang H X. Study on constituents、structure and performance of boron-titanium cast ferroalloy [D]. Xi’an: Xi’an Jiaotong University,2009(in Chinese).
姜红喜. 铁硼钛模具钢成分设计及其组织与性能研究[D]. 西安:西安交通大学,2009.
55 Liu Y, Li B H, et al. Effect of titanium on the ductilization of Fe-B alloys with high boron content [J]. Mater Lett,2010,64(11):129.
56 邓培凯. 铬、硅和锰对亚共晶合金组织与性能的影响[D]. 昆明:昆明理工大学,2013.
57 Yuan Q S. The effect of Zr,Cr,Ni on the microstructure of high boron steel[D]. Chengdu: Xihua University,2009(in Chinese).
袁亲松. Zr、Cr、Ni对高硼钢组织的影响[D]. 成都:西华大学,2009.
58 Liu Z L, Li Y X, Chen X, et al. Effect of copper on properties of high boron iron-base alloy [J]. Foundry Technol,2007,28 (2):175(in Chinese).
刘仲礼,李言祥,陈祥,等. 铜对高硼铁基合金性能的影响[J]. 铸造技术,2007,28 (2):175.
59 Su B W, Jiao M H, Wang Y L, et al. Influence of Cu on microstructure and tribological properties of high-boron iron based bearing materials[J]. Bearing,2015(1):32(in Chinese).
苏柏万,焦明华,王玉良,等. 铜对高硼铁基轴承材料组织及摩擦学特性的影响[J]. 轴承, 2015(1):32.
60 Ju J, Fu H G, Cheng M J, et al. Effect of aluminum content on solidification structure and.hardness of Fe-12Cr-1.5B-Al alloy[J]. Trans Mater Heat Treatment,2016,37(9):133(in Chinese).
鞠江,符寒光,程美洁,等. 铝含量对Fe-12Cr-1.5B-Al合金凝固组织和硬度的影响[J]. 材料热处理学报,2016,37(9):133.
61 Yu Z, Fu H G, Jiang Y H, et al. Effect of aluminum content on solidification microstructure and properties of Fe-Cr-B-Al alloy[J]. China Foundry Machinery Technol,2012(4):40(in Chinese).
于震,符寒光,蒋业华,等. 铝含量对 Fe-Cr-B-Al合金组织性能影响的研究[J]. 中国铸造装备与技术,2012(4):40.
62 Yang Y W, Fu H G, Wang K M, et al. Effect of aluminum on phase diagram and solidification microstructure of high boron high speed steel[J]. Trans Mater Heat Treatment,2016,37(7):48(in Chinese).
杨勇维,符寒光,王开明,等. 铝对高硼高速钢相图与凝固组织的影响[J]. 材料热处理学报,2016,37(7):48.
63 Guo C Q, Wang C D, Chen J, et al. Investigation of microstructure and mechanical properties of Fe-Cr-B alloys modified with cerium [J].Chin Rare Earths, 2009,30(4):95(in Chinese).
郭长庆,王彩东,程军,等. 铈变质处理Fe-Cr-B合金组织和机械性能研究[J]. 稀土,2009, 30(4):95.
64 Huang C Y. Study on the effects of rare earth on microstructure and properties of high boron iron-based Fe2.5B0.43C alloy[D]. Nanning: Guangxi University,2012(in Chinese).
黄春燕.变质处理对髙硼铁基耐磨Fe2.5B0.43C合金的组织和性能影响的研究[D]. 南宁:广西大学,2012.
65 王彩东. Fe-Cr-B合金变质处理的研究[D]. 包头:内蒙古科技大学,2008.
66 Kuang J C, Fu H G, Xing J D, et al. Effect of RE-N on solidification microstructure of Fe-B- Ti alloy [J]. J Rare Earths,2006,24:238.
67 Hu J G, Zou X W, Zhang W S. Effect of rare earth and nitrogen on solidification structure and properties of high boron ferroalloy[J]. Hot Working Technol,2011,40(19):19(in Chinese).
胡建国,邹小伟,张旺盛. 稀土、氮对高硼铁基合金凝固组织和性能的影响[J]. 热加工工艺,2011,40(19):19.
68 Shi X L, Jiang Y H, Cen Q H, et al. Effect of complex modification of RE-Mg on structure and mechanical properties of high boron iron-based alloys[J]. Foundry,2013,62(7):641(in Chinese).
师晓莉,蒋业华,岑启宏,等. 稀土镁变质处理对高硼铁基合金组织和性能的影响[J]. 铸造,2013,62 (7):641.
69 Zhang Y L, Jiang G Z, Wang S Z. Experimental study on low carbon high boron trace titanium nitrogen wear-resisting cast alloy[J]. Hot Working Technol,2015,44(11):43(in Chinese).
张艳玲,蒋桂芝,王守忠. 高硼低碳钛氮耐磨铸造合金的试验研究[J]. 热加工工艺,2015, 44(11) : 43.
70 Fu H G, Xiao Q, Kuang J C, et al. Effect of rare earth and titanium additions on the microstructures and properties of low carbon Fe-B cast steel[J]. Mater Sci Eng A,2007,466:160.
71 Liu Z L, Li Y X, Chen X, et al. Effect of RE-Mg on high boron iron-base alloy[J]. Foundry, 2007,56(4):400(in Chinese).
刘仲礼,李言祥,陈祥,等. 稀土镁对高硼铁基合金的影[J].铸造,2007,56(4):400.
72 Liu Z L, Chen X, Li Y X, et al. High boron iron-based alloy and its modification[J]. J Iron Steel Res (International),2009,16(3):37.
73 Feng X L, Jiang Z Q, Fu H G, et al. Study of new type high boron alloy steel[J]. Heat Treatment Metals, 2006(S1):57(in Chinese).
冯锡兰,蒋志强,符寒光,等. 新型高硼合金钢的研究[J]. 金属热处理,2006(S1):57.
74 Fu H G. Structure and performance of high boron cast steel liner[J]. J Jilin University,2006,36(4):467(in Chinese).
符寒光. 高硼铸钢衬板的组织和性能[J]. 吉林大学学报,2006,36(4):467.