不锈钢/铝合金异种金属激光-MIG熔钎焊工艺研究<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.012.011

Abstract
Figure/Table
References
Related Citation (11)

Download:

Full Text ( PDF ) (1507KB)
Export: BibTeX | EndNote (RIS)

Abstract The sound butt joints of 304 stainless steel/6061 alloy with a thickness of 2 mm were obtained using laser-MIG hybrid and MIG fusion-brazing welding. The microstructure, interface near stainless steel and mechanical property of the joints were investigated. The compounds layer in stainless steel/alloy laser-MIG hybrid fusion-brazing joints consisted of FeAl₂ (near stainless steel) and Fe₄Al₁₃ with a total thickness of 5 μm, but the thickness of joints welded by MIG was 3 μm. The tensile strength of laser-MIG hybrid fusion-brazing joints increased to 105 MPa (10.8 MPa higher than that of MIG fusion-brazing joints), which is 33.9% of the tensile strength of 6061 alloy. The fractures of the tensile specimens all originated in the interface of intermetallic compounds and spread to the reinforcement on the top side. The fracture mode also changed from the brittle rupture at the beginning to ductile rupture in the end.

Key words： dissimilar metals laser-MIG hybrid welding fusion-brazing welding intermetallic compound

Published: 08 May 2018

CLC number:

TB456.9

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHU Zongtao
	WAN Zhandong
	XUE Junyu

Cite this article:

ZHU Zongtao,WAN Zhandong,XUE Junyu. Research on Laser-MIG Fusion-Brazing Welding of Stainless Steel/Aluminum Dissimilar Metals[J]. Materials Reports, 2017, 31(12): 52-55.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.012.011 OR http://www.mater-rep.com/EN/Y2017/V31/I12/52

1 Shi Yan, Kuang Yulin, Liu Jia, et al. Nd∶YAG laser melting-brazing welding between 5052 aluminum and galvanized steel [J]. Appl Laser,2012,32(6):497(in Chinese).
石岩,邝玉林,刘佳,等.5052铝/镀锌钢Nd∶YAG激光熔-钎焊[J]. 应用激光,2012,32(6):497.
2 Yu Shurong, Jiang Kai, Fan Ding.5056 aluminum alloy and coated steel overlapped fusion welding-brazing by laser with preset filler powder [J]. J Mech Eng,2014,50(12):83(in Chinese).
余淑荣,蒋锴,樊丁.5056铝合金/镀锌钢预置涂粉激光熔钎焊组织及性能研究[J]. 机械工程学报,2014,50(12):83.
3 Zhou Dianwu, Qiao Xiaojie, Zhang Lijuan, et al. Parameters optimization of laser welding process of galvanized steel and 6016 aluminum alloy based on BP neural network and its microstructure and mechanical properties [J]. Chin J Nonferr Met,2014,24(3):678(in Chinese).
周惦武,乔小杰,张丽娟,等. 镀锌钢/6016铝合金激光焊的BP神经网络工艺优化及组织和性能[J]. 中国有色金属学报,2014,24(3):678.
4 Qin G L, Su Y H, Wang S J. Microstructures and properties of welded joint of aluminum alloy to galvanized steel by Nd∶YAG laser + MIG arc hybrid brazing-fusion welding[J]. Trans Nonferr Metal Soc China,2014,24(4):989.
5 Fan Ding, Zhang Shizheng, Yu Shurong, et al. Fusion-brazing welding for dissimilar metals between 5A02 aluminum alloy and Zincp-coated steel by CO₂ laser [J]. Hot Work Technol,2012,41(11):140(in Chinese).
樊丁,张诗正,余淑荣,等. 5A02铝合金与镀锌钢CO₂激光熔-钎焊接工艺[J]. 热加工工艺,2012,41(11):140.
6 Zhang Lijuan, Zhou Dianwu, Liu Jinshui, et al. Laser welding of steel/aluminum dissimilar metal with powder addition [J]. Chin J Nonferr Met,2013,23(12):3401(in Chinese).
张丽娟,周惦武,刘金水,等. 钢/铝异种金属添加粉末的激光焊接[J]. 中国有色金属学报,2013,23(12):3401.
7 Bach F W, Beniyas A, Lau K. Joining of steel-aluminum hybrid structures with electron beam on atmosphere [J]. Adv Mater Res,2005,6-8:143.
8 Chen Shuhai, Ma Ke, Huang Jihua, et al. Microstructure and mechanical property of joint by TIG welding-brazing with dual weld pools for steel/aluminum dissimilar metals [J]. Chin J Nonferr Met,2011,21(12):3076(in Chinese).
陈树海,马柯,黄继华, 等. 钢/铝异种金属双熔池TIG熔钎焊接头的显微组织与力学性能[J]. 中国有色金属学报,2011,21(12):3076.
9 Jacome L A, Weber S, Leitner A. Influence of filler composition on the microstructure and mechanical properties of steel-aluminum joints produced by metal arc joining [J]. Adv Eng Mater,2009,11(5):350.
10 Mei S W. Laser-arc hybrid welding of dissimilar 6061 aluminum alloy to 304 stainless steel [D]. Wuhan: Huazhong University of Science and Technology,2013(in Chinese).
梅述文. 铝钢异种金属激光-电弧复合焊接工艺和接头界面特性研究[D]. 武汉:华中科技大学,2013.
11 Wang S J. Influences of alloying elements on microstructures and properties of brazed-fusion welded joint of aluminum alloy to steel plate [D]. Jinan: Shandong University,2013(in Chinese).
王术军. 合金元素对铝合金钢熔-钎焊接头组织与性能的影响[D]. 济南:山东大学,2013.