粗晶TM52钢结硬质合金的冲击磨料磨损性能研究<sup>*</sup>

doi:10.11896/j.issn.1005-023X.2017.012.009

Abstract
Figure/Table
References
Related Citation (3)

Download:

Full Text ( PDF ) (1698KB)
Export: BibTeX | EndNote (RIS)

Abstract The impact abrasive wear resistance of coarse grained TM52 steel bonded carbide was systematically evaluated. And it was compared with the normal fine grained TM52 which were sintered in vacuum and at low pressure (about 5 MPa) under diffe-rent impact energy working condition. Then the wear mechanism of coarse grain TM52 was investigated based on the electron microscopy inspection analysis of its wear surface. The results revealed that the impact abrasive wear resistance of the coarse grained TM52 steel bonded carbide decreased first and increased later with the gradual improvement of the impact load, which was closely related to the high hardening rate and hardening effect of high manganese steel matrix under high impact energy conditions. The impact abrasive wear resistance of coarse grained TM52 steel bonded carbide had obvious advantages compared with fine grained TM52, especially under the high impact energy (3-4 J/cm²), the wear-resisting performance increased by 40%-80%. Its wear mechanism mainly includes grinding abrasion, scratch abrasion and fatigue abrasion, while chisel cutting abrasion was not obvious.

Key words： coarse grain steel bonded carbide impact abrasive wear impact energy

Published: 08 May 2018

CLC number:

TF125

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Zhihua
	XIAO Ping’an
	LI Chenkun
	LIU Yang
	SONG Jianyong
	CHEN Chao

Cite this article:

LI Zhihua,XIAO Ping’an,LI Chenkun, et al. Study on Impact Abrasive Wear of Coarse Grained TM52 High Manganese Steel Bonded Carbides[J]. Materials Reports, 2017, 31(12): 39-44.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.012.009 OR http://www.mater-rep.com/EN/Y2017/V31/I12/39

1 Li Meng, Cheng Juqiang, et al. Development of wear-resistant materials for crusher hammers and their manufacturing process[J]. Mining Machine,2012,40(7):67(in Chinese).
李梦,程巨强,等.破碎机锤头耐磨材料与制造工艺的发展[J].矿山机械,2012,40(7):67.
2 Chai Zengtian, Yu Liguo. Development of hammer crusher production process[J]. Mining Machine,2005,33(1):24(in Chinese).
柴增田,于立国.破碎机锤头生产工艺发展现状[J].矿山机械,2005,33(1):24.
3 Li Pengzhi. Progress in research on bimetal compound casting technology for crusher head [J].Metal Mine,2008(5):96(in Chinese).
李鹏志.破碎机锤头双金属复合铸造工艺的研究进展[J].金属矿山,2008(5):96.
4 Ferreira J A M, Pina Amaral M A.A study on the mechanical behavior of WC/Co hardmetal[J]. Int J Refractory Metal Hard Mater,2009,27:1.
5 Li Yong, Xie Shuhua. Research progress on WC coarse grain cemented carbide[J]. Mater Res Appl,2009,3(2):77(in Chinese).
李勇,谢淑华.WC粗晶硬质合金的研究进展[J].材料研究与应用,2009,3(2):77.
6 Guo Shengda,Yang Jiangao, Chen Hao. Research status of coarse grain WC-Co cemented carbide[J].Powder Metall Ind,2009,21(4):58(in Chinese).
郭圣达,羊建高,陈颢.粗晶粒WC-Co类硬质合金研究现状[J].粉末冶金工业,2009,21(4):58.
7 Zhang Li,Wang Yuanjie,Yu Xianwang, et al. The effect of WC powder particle size and morphology on WC cemented carbide′s grain size,grain morphology and properties[J].China Tungsten Ind,2008,23(4):23(in Chinese).
张立,王元杰,余贤旺,等.WC粉末粒度与形貌对硬质合金中WC晶粒度、晶粒形貌与合金性能的影响[J].中国钨业,2008,23(4):23.
8 Wang Hongfa.Present status and outlook of mateal wear resistant materials[J].Foundry,2000, 49(1):577(in Chinese).
王洪发.金属耐磨材料的现状与展望[J].铸造,2000,49(1):577.
9 Fu Hanguang. Progress in the study of wear resistant cast metal material[J].China Foundry Machinery Technol,2006(6):2(in Chinese).
符寒光.铸造金属耐磨材料研究的进展[J].中国铸造装备与技术,2006(6):2.
10 Shi J H, He X F. Study on technology for carburization of high qua-lity coarse-grained W[J].Rare Metals Lett,2005,10:28.
11 Reeder, David A, Burwick. Uniform coarse tungsten carbide powder and cemented tungsten carbide article and process for producing same: US, 5071473[P].1991-01-08.
12 Anon. Super coarse grained cemented carbide preparation 2: US, 5529804[P].1997-08-11.
13 Anon. Super coarse grained cemented carbide preparation: US, 5505902[P].1996-04-23.
14 Huang Xin. Study on high quality coarse WC powder and cemented carbide[D].Chongqing: Chongqing University,2004(in Chinese).
黄新.优质粗晶WC粉末及合金的研制[D].重庆:重庆大学,2004.
15 Zhou Jianhua, Lu Weimin. Analysis of present production and latest development of cemented carbide both at home and abroad[J].Rare Metal Cemented Carbides, 2006,34(1):36(in Chinese).
周建华,卢伟民.国内外硬质合金生产现状及近期发展动向分析[J].稀有金属与硬质合金,2006,34(1):36.
16 Zhang Weibing, Liu Xiangzhong, Chen Zhenhua. Latest development of WC-Co cemented carbides[J].Chin J Rare Metal,2015,39(2):178(in Chinese).
张卫兵,刘向中,陈振华.WC-Co硬质合金最新进展[J].稀有金属,2015,39(2):178.
17 Luo Guifu, Wu Jianguo. Research progress on coarse grain cemented carbide[J].Cemented Carbide,2013,30(1):46(in Chinese).
罗桂甫,吴建国.粗晶硬质合金的研究进展[J].硬质合金,2013,30(1):46.
18 Chu Kaiyu. The latest development and prospect of cemented carbide industry in China[J]. Rare Metal Cemented Carbides,2011,39(1):52(in Chinese).
储开宇.我国硬质合金产业的发展现状与展望[J].稀有金属与硬质合金,2011,39(1):52.
19 Ding Guoxin. Modification of UHMWPE and the application in mi-neral processing[D]. Huainan: Anhui University of Science and Technology,2007(in Chinese).
丁国新.UHMWPE的改性及其在选矿设备中的应用[D].淮南:安徽理工大学,2007.
20 Zu Fangqiu, Li Xiaoyun, Liu Lanjun. Research on organization and the mechanism of work hardening of high manganese steel under different relative impact energy[J]. Trans Mater Heat Treatment,2006,27(2):71(in Chinese).
祖方遒,李小蕴,刘兰俊.不同相对冲击功下高锰钢组织与加工硬化机制的研究[J].材料热处理学报,2006,27(2):71.
21 Lindroos, Apostol M. The deformation, strain hardening, and wear behavior of chormium-alloyed hadfield steel in abrasive and impact conditions[J]. Tribology Lett, 2015,57(3):47.
22 Dastur Y N, Leslie W C. Mechanism of work hardening in hadfield manganese steel[J]. Metall Trans A,1981,12(5):56.
23 Li Xiaoyun, Zu Fangqiu. Research on the ability of work hardening of high manganese steel at the condition of simulating actual work[J].Foundry,2005,54(5):462(in Chinese)