| REVIEW PAPER |
|
|
|
|
|
| Advances in Bulk Nanostructured Aluminum Alloys and Aluminum-matrix Composites Prepared via Cryomilling |
| ZHANG Kun1, LI Jiongli1,2, CHEN Junzhou1,2, WANG Xudong1,2, HE Xiaolei1,2, WU Yue1,2, ZHANG Haiping1,2
|
1 Beijing Institute of Aeronautical Materials, Beijing 100095;
2 Beijing Engineering Research Center of Advanced Aluminum Alloys and Applications, Beijing 100095 |
|
|
|
|
Abstract Research on the bulk nanostructured aluminum alloys and aluminum-matrix composites prepared via cryomilling is reviewed. The main gap between domestic and foreign on material preparation and equipment development is compared and analyzed. Besides, the existing problems, solutions and development directions of nanostructured aluminum in application study at home are also discussed. Finally, some suggestions and the application prospects on the bulk nanostructured aluminum alloys and aluminum-matrix composites are put forward.
|
|
Published: 04 May 2018
|
|
|
|
|
1 张立德,牟季美.纳米材料和纳米结构[M].北京:科学出版社,2005.
2 Ye J C, Han B Q, Lee Z, et al. A tri-modal aluminum based composite with super-high strength [J]. Scripta Mater,2005,53:481.
3 Williams J C, Starke J R E A. Progress in structural materials for aerospace systems [J]. Acta Mater,2003,51(19):5775.
4 Bampton C C, Wooten J R. Method for preparing rivets from cryomilled aluminum alloys and rivets produced thereby:USA, 7435306B2[P].2008-10-14.
5 Tellkamp V L, Melmed A, Lavernia E J. Mechanical behavior and microstructure of a thermally stable bulk nanostructure Al alloy[J]. Metall Maters Trans A, 2001,32:2335.
6 Lu Ke, Zhou Fei. Recent research progress on nanocrystalline materials[J]. Acta Metall Sin, 1997,33(1):99 (in Chinese).
卢柯, 周飞. 纳米晶体材料的研究现状[J]. 金属学报, 1997,33(1):99.
7 Tellkamp V L, Lavernia E J. Processing and mechanical properties of nanocrystalline 5083 Al alloy [J]. Nano Structured Mater,1999,12:249.
8 Hu T, Ma K, Topping T D, et al. Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle [J]. Scripta Mater,2014, 78-79:25.
9 Ma K K, Wen H M, Hu T, et al. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy [J]. Acta Mater,2014,62:141.
10 Ma K K, Hu T, Yang H, et al. Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al-Zn-Mg alloys [J]. Acta Mater,2016,103:153.
11 Witkin D, Lee Z, Rodriguez R, et al. Al-Mg alloy engineered with bimodal grain size for high strength and increased ductility [J]. Scripta Mater,2003,49:297.
12 Han B Q, Lee Z, et al. Deformation behavior of bimodal nanostructured 5083 Al alloys [J]. Metall Mater Trans A,2005,36:957.
13 Zhang Z H, Han B Q, Chung K H, et al. On the behavior of microstructures with multiple length scales [J]. Metall Mater Trans A,2006,37:2265.
14 Li Y, et al. Investigation of aluminum-based nanocomposites with ultra-high strength [J]. Mater Sci Eng A,2009,527:305.
15 Vogt R. Ultrafine-grained aluminum and boron carbide metal matrix composites [D]. California: University of California,2010.
16 Cheng Junsheng, Yang Bin, Zhang Jishan, et al. Research on grain stability under room temperature of nanocrystalline Al-Zn-Mg-Cu alloy cryomilled powders [J]. Heat Treatment Metals,2008,33(3):17(in Chinese).
程军胜,杨滨,张济山,等. 液氮球磨Al-Zn-Mg-Cu合金纳米晶粉末的室温稳定性研究[J]. 金属热处理, 2008,33(3):17.
17 Li Jiongli, Li Shasha, Xiong Yancai, et al. Nanocrystalline aluminum powders prepared via cryomilling [J]. J Aeronaut Mater,2012,32(2):38(in Chinese).
李炯利, 厉沙沙, 熊艳才, 等. 低温球磨制备纳米晶纯铝粉体[J]. 航空材料学报,2012,32(2):38.
18 Li Jiongli, Li Shasha, Xiong Yancai, et al. Preparation of super high strength bulk nanocrystalline Al by cryomilling [J].Chinese J Nonferrous Metals,2013, 23(5):1182(in Chinese).
李炯利, 厉沙沙, 熊艳才, 等. 低温球磨制备超高强度块体纳米晶纯铝[J]. 中国有色金属学报,2013, 23(5):1182.
19 美国金属学会. 金属手册[M]. 范玉殿, 张效忠, 白新德, 译. 北京: 机械工业出版社,1994.
20 Bonetti E, Pasquini L, Sampaolesi E. The influence of grain size on the mechanical properties of nanocrystalline aluminum[J]. Nano Structured Mater, 1997,9:611.
21 Sun Xiukui, Cong Hongtao, Xu Jian, et al. Synthesis and tensile properties of nanocrystalline Al(Ⅰ)[J]. Chinese J Mater Res,1998,12(6):645(in Chinese).
孙秀魁, 丛洪涛, 徐坚, 等. 纳米晶Al的制备及拉伸性能(Ⅰ)[J]. 材料研究学报,1998,12(6):645.
22 Sun Xiukui, Cong Hongtao, Xu Jian, et al. Synthesis and tensile properties of nanocrystalline Al(Ⅱ)[J]. Chinese J Mater Res,1998,12(6):651(in Chinese).
孙秀魁, 丛洪涛, 徐坚, 等. 纳米晶Al的制备及拉伸性能(Ⅱ)[J]. 材料研究学报,1998,12(6):651.
23 Cheng J S, Cui H, Chen H B, et al. Bulk nanocrystalline Al prepared by cryomilling[J]. J University of Science and Technology Beijing,2007, 14(6):523.
24 Wang Deqin, Zhang Dawei. Structure and mechanical properties of bulk nanocrystalline aluminum by cryomilling [J]. J Dalian Jiaotong University,2010, 31(1):68(in Chinese).
王德庆, 张大伟. 低温球磨制备块体纳米Al晶体材料的组织与性能[J]. 大连交通大学学报,2010,31(1):68.
25 Li Jiongli,Zhang Kun,Xiong Yancai. Advances in research on nanocrystalline Al-Mg alloys with high performance [J]. J Mater Eng,2013(11):75(in Chinese).
李炯利,张坤,熊艳才. 高性能纳米晶Al-Mg合金的研究进展[J]. 材料工程,2013(11):75.
26 Li J L, Xiong Y C, Wang X D, et al. Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling [J]. Mater Sci Eng A,2015,626:400. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2017, Vol. 31 
