新型高强钢板在结构抗接触爆炸中的应用

doi:10.11896/cldb.23060206

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (24622KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the enhancing effect of NFB700E1 high-strength steel plate on the anti-collapse performance of reinforced concrete structures, five sets of contact explosion tests on the composite structure were carried out(including a control group of Q345 ordinary steel plate), while an effective numerical simulation model was established based on the test results. Through lots of numerical simulation tests, the equivalent non-collapsing coefficient (ENC for short) of composite structures are calculated, by which the enhancement range of anti-collapsing steel plate is quantified. The results show that, in the anti-explosion tests, the equivalent diameter of blast pit, the depth of blast pit and the maximum deformation of anti-collapsing steel plate all grow up with the decrease of the thickness of reinforced concrete target plate. By comparing the depth of blast hole and the maximum deformation of steel plate in both simulation and tests, the finite element numerical simulation model was continuously iterative optimized. The ENC of compose structures and reinforced concrete were calculated. For the NFB700E1 steel plates of different thickness, the ENC were about 0.141(8 mm) and 0.159(6 mm), which were 70.3% and 66.5% higher than that of reinforced concrete (ENC=0.475), respectively. Compared to the Q345 ordinary steel plate (ENC=0.230), the increases were respectively 38.7% and 30.9%. The numerical simulation model established in this work can be extended to more working conditions and provide reference for the research of anti-collapse in other protection engineering.

Key words： reinforced concrete high strength steel plate anti-collapse numerical simulation finite element analysis

Published: 10 March 2024 Online: 2024-03-18

CLC number:

O383.2

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	FANG Xinyu
	XU Gancheng
	WEI Yingqi
	LIU Yanquan
	YUAN Weize
	ZHOU Junpeng

Cite this article:

FANG Xinyu,XU Gancheng,WEI Yingqi, et al. Research on the Application of a New Type of High Strength Steel Plate in Structures Resistance to Contact Explosion[J]. Materials Reports, 2024, 38(5): 23060206-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23060206 OR http://www.mater-rep.com/EN/Y2024/V38/I5/23060206

1 Zheng Q P, Qian Q H, Zhou Z S, et al. Engineering Mechanics, 2003, 20(3), 47 (in Chinese).
郑全平, 钱七虎, 周早生, 等. 工程力学, 2003, 20(3), 47.
2 Zheng Q P, Zhou Z S, Qian Q H, et al. Chinese Journal of Rock Mechanics and Engineering, 2003, 22(8), 1393(in Chinese).
郑全平, 周早生, 钱七虎, 等. 岩石力学与工程学报, 2003, 22(8), 1393.
3 Hulton F G, Gough M S. In: Proceedings of the 9th International Symposium of Interaction of the Effects on Munitions with Structures. Berlin, Germany:ISIEMS, 1999, pp.330.
4 Wang M Y, Zhang S M, Guo S B. Explosion and Shock Waves, 2002, 22(1), 40(in Chinese).
王明洋, 张胜民, 国胜兵. 爆炸与冲击, 2002, 22(1), 40.
5 Liu J C, Fang Q, Zhang Y D, et al. Acta Armamentarii, 2004, 25(6), 773 (in Chinese).
柳锦春, 方秦, 张亚栋, 等. 兵工学报, 2004, 25 (6), 773.
6 Hu J S, Yang X M, Zhou Z S, et al. Explosion and Shock Waves, 2005, 25(2), 157(in Chinese).
胡金生, 杨秀敏, 周早生, 等. 爆炸与冲击, 2005, 25(2), 157.
7 Ge T, Pan Y F, Tan K K, et al. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(S1), 3553.
葛涛, 潘越峰, 谭可可, 等. 岩石力学与工程学报, 2007, 26(S1), 3553.
8 Zhang X B, Yang X M, Chen Z Y, et al. Journal of Tsinghua University (Science and Technology), 2006, 46(6), 765(in Chinese).
张想柏, 杨秀敏, 陈肇元, 等. 清华大学学报(自然科学版), 2006, 46(6), 765.
9 Han G J, Cheng G L, Yang J Y, et al. Protective Engineering, 2013, 35(6), 13(in Chinese).
韩国建, 程国亮, 杨进勇, 等. 防护工程, 2013, 35(6), 13.
10 Wang W, Yang J C, Wang J H, et al. Explosion and Shock Waves, 2020, 40(12), 11(in Chinese).
汪维, 杨建超, 汪剑辉, 等. 爆炸与冲击, 2020, 40(12), 11.
11 Yang J C, Wang J H, Chen L, et al. Acta Armamentarii, 2021, 42(1), 133(in Chinese).
杨建超, 汪剑辉, 陈力, 等. 兵工学报, 2021, 42(1), 133.
12 Wei J Q, Li L, Wang S H, et al. Explosion and Shock Waves, 2022, 42(4), 1(in Chinese).
魏久淇, 李磊, 王世合, 等. 爆炸与冲击, 2022, 42(4), 1.
13 Research report on physical and mechanical properties of NFB700E1 steel plate. Nanjing Iron & Steel Group Co. Ltd., China, 2019(in Chinese).
NFB700E1钢板物理力学性能研究报告. 南京钢铁集团有限公司, 2019.
14 Wang C, Wang W J, Ning J G. Chinese Journal of' Theoretical and Applied Mechanics, 2015, 47(4), 672(in Chinese).
王成, 王万军, 宁建国. 力学学报, 2015, 47(4), 672.
15 Li X L, Zhang S T, Li M Y, et al. Journal of China Coal Society, 2016, 41(S2), 419.
李祥龙, 张松涛, 李明扬, 等. 煤炭学报, 2016, 41 (S2), 419.
16 Bibiana M L, Ricardo D A. Mecanica Computational, 2008(25), 1999.
17 Elshenawy T, Li Q M. International Journal of Impact Engineering, 2013, 54, 130.
18 Li C. Study on failure mechanics and explosion-proof method for cylindrical shell under internal explosion. Master's Thesis, Huaqiao University, China, 2016 (in Chinese).
李超. 柱面网壳结构在内爆炸下的失效机理和防爆方法. 硕士学位论文, 华侨大学, 2016.
19 Qian Q H, Wang N Q, Sun N G, et al. Calculation principle of protective structure, Engineer Corps Engineering College, Nanjing, China, 1981, pp. 75(in Chinese).
钱七虎, 王年桥, 孙乃光, 等. 防护结构计算原理, 南京: 工程兵工程学院, 1981, pp. 75.
20 Hu J S, Yang K Z, Dong J, et al. Protective Engineering, 2016, 38(3), 35(in Chinese).
胡金生, 杨科之, 董军, 等. 防护工程, 2016, 38(3), 35.