| INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
| Study on the Influence of Presintering Heating Rate and HIP Holding Time on the Transmittance of AlON Transparent Ceramic |
| LIU Fafu1,2,*, GAO Chuang1,2, MU Xiaoming1,2, ZHANG Cong1,2, GUO Zaizai1,2, GUO Jianbin1,2, CAO Jianwu1,2, LIN Guangqing1,2
|
1 Ningbo Branch of China Ordnance Research Institute, Ningbo 315103, Zhejiang China
2 Inner Mongolia Metal Material Research Institute, Baotou 014000, Inner Mongolia, China |
|
|
|
|
Abstract Alumina nitride (AlON) transparent ceramics are widely used in transparent armor, multimode visible-infrared guidance hoods, and laser windows due to their excellent properties such as high optical transmittance, high mechanical properties, and high chemical stability. The light transmittance of AlON transparent ceramics is closely related to their sintering process. Based on this, this work investigated the effects of pre sintering heating rate and hot isostatic pressing (HIP) holding time on the visible light transmittance of AlON transparent ceramics, and analyzed the phase changes and crystal morphology changes of AlON within the sintering temperature range of 1 300 ℃ to 1 940 ℃, as well as the micro morphology changes of ceramics after HIP. The results show that in the range of 1 400 ℃ to 1 700 ℃, increasing the heating rate helps to reduce the degree of phase decomposition of AlON and improve its optical transmittance. The prolongation of hot isostatic pressing (HIP) post treatment time is helpful to remove residual pores from the interior of AlON transparent ceramics, further improving their light transmittance. AlON transpa-rent ceramics can be highly densified after presintering at 1 940 ℃ for 8 hours without pressure at a heating rate of 10 ℃/min, and then subjected to hot isostatic pressing at 1 900 ℃ and 190 MPa for 2.5 hours. Its optical transmittance can be increased to over 80%. Therefore, increasing the pre sintering heating rate and prolonging the hot isostatic pressing holding time reduces the light scattering degree of AlON ceramic decomposition products and pores, which can improve its visible light transmittance.
|
|
Published:
Online: 2023-09-06
|
|
|
| Fund:National Key Research and Development Plan Project (2022YFB3705900),Mount Taishan Scholar Project of Shandong Province. |
|
|
1 Goldman L M, Hartnett T, MWahl J M, et al. Proceedings of SPIE-The International Society for Optical Engineering, 2001, DOI:10. 1117/12. 439195.
2 Wei G C. Journal of Physics D- Applied Physics, 2005, 38 (17), 3057.
3 Krell A. Journal of the American Ceramic Society, 2003, 86(4), 546.
4 Yamaguchi G, Yanagida H. Bulletin of the Chemical Society of Japan, 1959, 32(11), 1264.
5 Goursat P, Goeuriot P, Billy M. Materials Chemistry . 1976, 1(2), 131.
6 Corbin N D. Journal of the European Ceramic Society, 1989, 5(3), 143.
7 Gentilman R, Maguire E, Kohane T, et al. Proc. SPIE, 1989, 1112, 31.
8 Goldman L MBalasubramanian SKashalikar Uet al. Proceedings of SPIE-The International Society for Optical Engineering, 2013, 8708, 4.
9 Miller L, Kaplan W D. The American Ceramic Society, 2008, 91 (5), 1693.
10 Chen F, Zhang F, Wang J, et al. Journal of Alloys and Compounds, 2015, 650, 753.
11 Chen F, Zhang F, Wang J, et al. Scripta Materialia, 2014, 81, 20.
12 Zheng K, Wang H, Xu P, et al. Journal of the European Ceramic Society, 2021, 41(7), 4319.
Tian T, Sun F, Huang C, et al. Special Ceramics Branch of the Chinese Silicate Society, Summary of the 17th National High tech Ceramics Academic Annual Conference, 2012, pp.101
13 田庭燕, 孙峰, 黄存新, 等. 中国硅酸盐学会特种陶瓷分会. 第十七届全国高技术陶瓷学术年会摘要集. 2012, pp. 101.
14 Du W, Lu K, He B, et al. Journal of the European Ceramic Society, 2023, 43(8), 3538.
15 Su M, Zhou Y, Wang K, et al. Journal of the European Ceramic Society, 2015, 35(4), 1173.
16 Yang J, Cong Y, Ling J, et al. Journal of the European Ceramic Society, 2022, 42(3), 935.
17 Shan Y, Wei X, Sun X, et al. Journal of the American Ceramic Society, 2019, 102(2), 662. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2023, Vol. 37 
