INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Flexural Performance of Spray-based 3D Printed Concrete with Continuous Micro-cable |
LIU Xiongfei1,2,*, HOU Guanyu1,2, CAI Huachong1,2, LI Zhijian1,2
|
1 School of Civil Engineering and Transportation, Hebei University of Technology, Tianjin 300401, China 2 Engineering Research Center on 3D Construction Printing of Hebei, Tianjin 300401, China |
|
|
Abstract The distance between the spray nozzle and the print substrate can effectively solve the co-construction problem of 3D printing and reinforcement. In this work, a design method of spray-based 3D printed micro-cable reinforced concrete was proposed based on the collaborative continuous reinforcement and sprayed-based 3D printing concrete technologies. The effects of different reinforcement diameter (0.6, 0.8, 1.0 mm) and number (1—4) on the flexural performance of spray-based 3D printed micro-cable reinforced concrete were comprehensively studied. The test results show that the micro-cable can significantly improve the flexural strength and ductility of the printed concrete. Compared with the unreinforced group (D0 sample), the flexural strength and displacement of the printed micro-cable reinforced concrete are enhanced by 800% and 2 076.47%, respectively. In addition, based on the high-speed spraying pressure and layer-by-layer printing characteristics of spray-based 3D printing, the interface between the micro-cable and concrete is bonded firmly and compactly, which further ensures the flexural performance and structural integrity of spray-based 3D printed micro-cable concrete. To verify the practicability of the spray-based 3D printed micro-cable reinforced concrete system, a special-shaped torch structure with the size of 1 300 mm (Z)×800 mm (X)×86 mm (Y) is printed, which provides a certain reference for the preparation and application of 3D printed reinforced concrete structures in large scale.
|
Published:
Online: 2024-01-16
|
|
Fund:National Natural Science Foundation of China (52278252,51908182,52108205) and Natural Science Foundation of Hebei Province (E2020202043,E2022202041,D2020202008). |
|
|
1 Kreiger E L, Kreiger M A, Case M P. Additive Manufacturing, 2019, 28, 39. 2 Salet T A, Ahmed Z Y, Bos F P, et al. Virtual Physical Prototyping, 2018, 13(3), 222. 3 Ma G, Li Z, Wang L, et al. Materials Letters, 2019, 235, 144. 4 Ma G, Li Z, Wang L, et al. Construction and Building Materials, 2019, 202, 770. 5 Bai G, Wang L, Ma G, et al. Cement and Concrete Composites, 2021, 120, 104037. 6 Vantyghem G, De Corte W, Shakour E, et al. Automation in Construction, 2020, 112, 103084. 7 Asprone D, Auricchio F, Menna C, et al. Construction and Building Materials, 2018, 165, 218. 8 Wang L, Ma G, Liu T, et al. Cement and Concrete Research, 2021, 148, 106535. 9 Li Z, Wang L, Ma G. Composites Part B:Engineering, 2020, 187, 107796. 10 Lim J H, Panda B, Pham Q C. Construction and Building Materials, 2018, 178, 32. 11 Li Z J, Ma G W, Wang L. Jounal of Experimantal Mechanics, 2021, 36(8), 1001 (In Chinese). 李之建, 马国伟, 王里. 实验力学, 2021, 36(8), 1001. 12 Bos F P, Kruger P, Lucas S S, et al. Cement Concrete Composites, 2021, 120, 104024. 13 Muthukrishnan S, Ramakrishnan S, Sanjayan J J C, et al. Cement Concrete Composites, 2021, 122, 104144. 14 Heidarnezhad F, Zhang Q. Construction and Building Materials, 2022, 323, 126545. 15 Bai G, Wang L, Ma G, et al. Cement Concrete Composites, 2021, 120, 104037. 16 Lu B, Li M, Wong T N, et al. Automation in Construction, 2021, 124, 103570. 17 Liu X, Li Q, Wang L, et al. Cement Concrete Composites, 2022, 133, 104688. 18 Liu X, Li Q, Li J. Materials Letters, 2022, 319, 132253. 19 Kloft H, Krauss H W, Hack N, et al. Cement and Concrete Research, 2020, 134, 106078. 20 Lu B, Li M, Lao W, et al. In:Proceedings of the 2018 International So-lid Freeform Fabrication Symposium. University of Texas at Austin, Austin, 2018. 21 Lu B, Li M, Leong K F, et al. In:Proceedings of the International Conference on Progress in Additive Manufacturing. Nanyang Technological University, Singapore, 2018, pp. 38. 22 Lu B, Qian Y, Li M, et al. Construction and Building Materials, 2019, 211, 1073. 23 Lu B, Zhu W, Weng Y, et al. Journal of Cleaner Production, 2020, 258, 120671. 24 Lindemann H, Gerbers R, Ibrahim S, et al. In:Proceedings of the RILEM International Conference on Concrete and Digital Fabrication. Springer, Cham, 2018, pp. 287. 25 Bos F P, Ahmed Z Y, Jutinov E R, et al. Materials, 2017, 10(11), 1314. 26 Xiao J, Chen Z, Ding T, et al. Cement and Concrete Composites, 2022, 125, 104313. 27 Baant Z P, Kazemi M T. International Journal of Fracture, 1991, 51(2), 121. 28 Zhou J, Hou G, Liu X, et al. In:Proceedings of the International Confe-rence on Green Building, Civil Engineering and Smart City. Springer, Singapore, 2023, pp. 934. |
|
|
|