剪切增稠液增强高发泡率废纸缓冲材料的制备及性能

doi:10.11896/cldb.22050253

Abstract
Figure/Table
References
Related Citation (7)

Download:

Full Text ( PDF ) (21510KB)
Export: BibTeX | EndNote (RIS)

Abstract With the rapid economic growth and continuous enhancement of people’s awareness of environmental protection, eco-friendly plant fiber-based foaming buffer materials have gradually become a research focus. In order to improve some drawbacks of plant fiber-based foaming buffer materials, including low foaming ratio, weak energy absorption, and so on, this study designed a semi-closed foaming mold and successfully prepared buffer materials with high foaming ratio and excellent energy absorption, and the preparation technology was optimized. The results indicated that the impurities in the waste paper are effectively removed, and the waste paper fibers can be modified without reducing the fiber length by using 0.5% sodium hydroxide solution, which is beneficial to improve the foaming ratio and comprehensive performance of waste paper foaming buffer materials. The optimal formula and the effect of the weight of the raw materials composition on the characteristics of waste paper foaming buffer materials were analyzed through the orthogonal test. The waste paper foaming buffer materials with a high foaming ratio were successfully prepared by a newly designed semi-closed foaming mold in this work. Its expansion ratio is increased by 3—4 times compared with the traditional method. This study first introduced shear thickening fluid (STF) as an enhancer to enhance the strength of waste paper fiber, and the influence of the content of STF on mechanical properties, foaming ratio, and the resilience performance of waste paper foaming buffering mate-rials were systematically investigated. And the reinforcement mechanism of STF on waste paper foaming buffering materials was also analyzed. The results reveal that the STF can enhance the strength of waste paper fibers and strengthen the connection between fibers, which can improve the energy absorption of the buffer materials. And with the increase of the STF content, the energy absorption of the buffer material gradually enhanced and the foaming ratio of the buffer materials gradually decreased. The comprehensive performance of STF-reinforced waste paper foaming buffer materials is optimal when the content of STF is 10%.

Key words： waste paper fiber shear thickening fluid buffer packaging material high foaming ratio

Published: Online: 2024-01-16

CLC number:

TB484

Fund:National Natural Science Foundation of China (32271819).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Bin
	TAO Wenxuan
	PEI Shuang
	REN Ziming
	PAN Zheng
	GOU Jinsheng

Cite this article:

ZHANG Bin,TAO Wenxuan,PEI Shuang, et al. Preparation and Properties of Shear Thickening Fluid Reinforced High Foaming Ratio Waste Paper Buffer Material[J]. Materials Reports, 2024, 38(1): 22050253-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22050253 OR http://www.mater-rep.com/EN/Y2024/V38/I1/22050253

1 Razza F, Innocenti F D, Dobon A, et al. Journal of Cleaner Production, 2015, 102, 493.
2 Gouw V P, Jung J, Simonsen J, et al. Composites Part A:Applied Science & Manufacturing, 2017, 99, 48.
3 Tajik S, Maghsoudlou Y, Khodaiyan F, et al. Carbohydratio Polymers, 2013, 97, 817.
4 Li J, Yang X, Xiu H, et al. Industrial Crops and Products, 2019, 128, 186.
5 Xiao J F, Xiao S L, Gao X C. Forest Engineering, 2013(2), 9 (in Chinese).
肖俊芳, 肖生苓, 高献策. 森林工程, 2013(2), 9.
6 Cao Y F, Wei L J, Sun H, et al. Journal of Materials Science & Engineering, 2020, 38(5), 9 (in Chinese).
曹延芬, 卫灵君, 孙昊, 等. 材料科学与工程学报, 2020, 38(5), 9.
7 Cao J S, Zhang X C, Zhao R. Packaging Engineering, 2018, 39(9), 37 (in Chinese).
曹景山, 张新昌, 赵瑞. 包装工程, 2018, 39(9), 37.
8 Chen S M. Investigation in preparation and properties of bamboo powder/starch foam composites. Master’s Thesis, Hunan University of Technology, China, 2014 (in Chinese).
陈三梅. 竹粉/淀粉复合发泡材料的制备及其性能研究. 硕士学位论文, 湖南工业大学, 2014.
9 Wang G Y, Shi J Y, Ye S Y. Journal of Northeast Forestry University, 2010, 38(8), 84 (in Chinese).
王古月, 时君友, 叶升友. 东北林业大学学报, 2010, 38(8), 84.
10 Jin C X, Gao J Q, Xie P, et al. New Building Materials, 2010, 37(7), 78 (in Chinese).
金翠霞, 高俊强, 谢普, 等. 新型建筑材料, 2010, 37(7), 78.
11 Wang H Z. Preparation of ultra light material combined salix fiber with waste paper fiber. Master’s Thesis, Inner Mongolia Agricultural University, China, 2015 (in Chinese).
王海珍. 沙柳废纸混合纤维超轻质材料的制备. 硕士学位论文, 内蒙古农业大学, 2015.
12 Li Y L, Wang J J, Shao F W. Packaging Engineering, 2008(11), 5 (in Chinese).
李友良, 王家俊, 邵锋伟. 包装工程, 2008(11), 5.
13 Ju Y N. Research on environmental protection fiber foaming buffer material. Master’s Thesis, Jiangnan University, China, 2012 (in Chinese).
巨杨妮. 环保型纸纤维发泡缓冲材料的研究. 硕士学位论文, 江南大学, 2012.
14 Zeng G S, Lin R Z, Zheng L J, et al. Journal of Functional Materials, 2013, 44(1), 51 (in Chinese).
曾广胜, 林瑞珍, 郑良杰, 等. 功能材料, 2013, 44(1), 51.
15 Pei L. Research on foaming principle of molded pulp product. Master’s Thesis, Xi’an University of Technology, China, 2007 (in Chinese).
裴璐. 纸浆模塑制品发泡机理的研究. 硕士学位论文, 西安理工大学, 2007.
16 Li Y Y. Research about key technology in the process of producing foaming plant fiber molding products. Master’s Thesis, Chongqing Techno-logy and Business University, China, 2008 (in Chinese).
李媛媛. 发泡植物纤维模压制品的关键生产技术研究. 硕士学位论文, 重庆工商大学, 2008.
17 Shi P, Ouyang L, Cai S R. Packaging Journal, 2013, 5(3), 55 (in Chinese).
石璞, 欧阳龙, 蔡淑容. 包装学报, 2013, 5(3), 55.
18 Guo Z, Huang J Y. Packaging Engineering, 2010, 31(15), 55 (in Chinese).
郭震, 黄俊彦. 包装工程, 2010, 31(15), 55.
19 Yu Q, He C X. Materials Reports, 2009, 23(S1), 418 (in Chinese).
郁青, 何春霞. 材料导报, 2009, 23(S1), 418.
20 Xi W. Guangzhou Chemical Industry, 2018, 46(12), 71 (in Chinese).
郗伟. 广州化工, 2018, 46(12), 71.
21 Lee Y S, Wetzel E D, Wagner N J. Journal of Materials Science, 2003, 38(13), 2825.
22 Jeddi M, Yazdani M. Journal of Composite Materials, 2021, 55(16), 2151.
23 Jeddi M, Yazdani M, Hasan-Nezhad H. Thin-Walled Structures, 2021, 168, 108254.
24 Chatterjee V A, Verma S K, Bhattacharjee D, et al. Composite Structures, 2019, 225, 111148.
25 Tan Z H, Zuo L, Li W H, et al. Materials & Design, 2016, 94, 105.
26 Soutrenon M, Michaud V. Smart Materials and Structures, 2014, 23(3), 035022.
27 Fan T, Xue S S, Zhu W B, et al. ACS Applied Materials & Interfaces, 2022, 11, 14.
28 Moghim M H, Keshavarz M, Zebarjad S M. Polymer Bulletin, 2019, 76, 1.
29 Fahool M, Sabet A R. International Journal of Impact Engineering, 2016, 90, 61.
30 Zarei M, Aalaie J. Journal of Materials Research and Technology, 2020, 9(6), 10411.
31 Zhang X, Liang C H. Paper and Paper Making, 2013, 32(2), 22 (in Chinese).
张雪, 梁聪慧. 纸和造纸, 2013, 32(2), 22.
32 Ma Z J. Environment and Development, 2020, 32(5), 72 (in Chinese).
马志娟. 环境与发展, 2020, 32(5), 72.
33 Zhao C. Study on the effects of DCS and fiber properties of OCC by chemical-pretreatment explosion. Master’s Thesis, Guangxi University, China, 2014 (in Chinese).
赵晨. 膨化法处理对废旧瓦楞纸回用过程中溶胶物质和纤维性能的研究. 硕士学位论文, 广西大学, 2014.
34 Xiao M Z. Paper and Biomaterials, 1999(2), 36(in Chinese).
肖明祯. 国际造纸, 1999(2), 36.
35 Zhang H Y. Research on formula optimization and microwave foaming process of waste paper fiber foaming materials. Master’s Thesis, Jiangnan University, China, 2013 (in Chinese).
张惠莹. 废纸纤维发泡材料的配方优化及微波发泡工艺研究. 硕士学位论文, 江南大学, 2013.
36 Wang Z, Li C. Packaging Engineering, 2022, 43(1), 26 (in Chinese).
王哲, 李琛. 包装工程, 2022, 43(1), 26.
37 He J M. New Polymer foam material and technology, Chemical Industry Press, China, 2008, pp. 7 (in Chinese).
何继敏. 新型聚合物发泡材料及技术, 化学工业出版社, 2008, pp. 7.
38 Cai J. Study on preparation and performance of the plant fiber foam cus-hioning material. Master’s Thesis, Xi’an University of Technology, China, 2017 (in Chinese).
蔡静. 植物纤维发泡缓冲材料的制备及性能研究. 硕士学位论文, 西安理工大学, 2017.
39 Chen Y F. Study on preparation and properties of the plant fiber foaming cushion material. Master’s Thesis, Jiangnan University, China, 2015 (in Chinese).
陈玉芬. 植物纤维发泡缓冲材料的制备及其性能研究. 硕士学位论文, 江南大学, 2015.
40 Li B, Zhang X C, Cao J S, et al. Light Industry Machinery, 2018, 36(4), 1 (in Chinese).
李博, 张新昌, 曹景山, 等. 轻工机械, 2018, 36(4), 1.
41 Huo J L, Sun F, Li T T. Journal of Materials Research and Technology, 2020, 9(5), 10982.
42 Wu J J. Study on the technics and packaging properties of waste paper fiber and starch composite foaming material. Master’s Thesis, Tianjin University of Science and Technology, China, 2011 (in Chinese).
武娟娟. 废纸纤维淀粉复合发泡材料工艺与包装性能研究. 硕士学位论文, 天津科技大学, 2011.
43 Wang P, Yu K, Liu X K. Materials Research Express, 2019, 6, 12.
44 Decker M J, Halbach C J, Nam C H, et al. Composites Science & Technology, 2007, 67, 565.
45 Fahool M, Sabet A R. International Journal of Impact Engineering, 2016, 90, 61.