反应熔渗工艺制备碳纤维增强陶瓷基复合材料研究进展

doi:10.11896/cldb.22050068

Abstract
Figure/Table
References
Related Citation (4)

Download:

Full Text ( PDF ) (2404KB)
Export: BibTeX | EndNote (RIS)

Abstract Carbon fiber reinforced ceramic matrix composites prepared by reactive melt infiltration (RMI) process have attracted extensive attention because of the advantages of short cycle, low cost and high density. In this paper, the research progress of porous low-density C/C substrate structure, matrix modification composition and preparation process affecting the preparation of carbon fiber reinforced ceramic matrix composites by RMI is reviewed. The results show that the mechanical and anti-oxidation ablation performance of the composites can be significantly improved by optimizing the carbon matrix type, carbon fiber preform structure, substrate density and pore structure. By introducing functional components into C/C composites through matrix modification technology, the oxidation, ablation and abrasion resistance of C/C composites can be significantly improved. The composites with good comprehensive properties can be prepared by optimizing the infiltration process, such as adjusting the infiltration temperature and time, and selecting the appropriate type of infiltrants. Finally, the main problem and potential research directions in the preparation of carbon fiber reinforced ceramic matrix composites by RMI process are pointed out.

Key words： reactive melt infiltration ceramic matrix composite porous low-density C/C matrix matrix modification

Published: 25 November 2022 Online: 2022-11-25

CLC number:

TB332

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	FENG Shijie
	SONG Huanjun
	CHEN Haoran
	SUN Yanan
	YANG Xiaojian
	ZHANG Baopeng
	YANG Liangwei
	LIU Wei

Cite this article:

FENG Shijie,SONG Huanjun,CHEN Haoran, et al. Research Process on Preparation of Carbon Fiber Reinforced Ceramic Matrix Composites by Reactive Melt Infiltration[J]. Materials Reports, 2022, 36(22): 22050068-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22050068 OR http://www.mater-rep.com/EN/Y2022/V36/I22/22050068

1 Guo W, Bai S, Ye Y, et al. Journal of the European Ceramic Society, 2020, 41(4), 2347.
2 Huang Q Z. Fabrication, structure and application of high-performance carbon/carbon composites, Central South University Press, China, 2010, pp.8(in Chinese).
黄启忠. 高性能炭/炭复合材料的制备、结构与应用, 中南大学出版社, 2010, pp.8.
3 Chen X W, Feng Q, Kan Y M, et al. Journal of the European Ceramic Society, 2020, 40(7), 2683.
4 Zhang L T. Fiber-reinforced silicon carbide ceramic composites-modeling, characterization & design, Chemical Industry Press, China, 2009, pp.28(in Chinese).
张立同. 纤维增韧碳化硅陶瓷复合材料:模拟、表征与设计, 化学工业出版社, 2009, pp.28.
5 Jiang S Z, Xiang X, Chen Z K, et al. Materials & Design, 2009, 30(9), 3738.
6 Peng Z, Sun W, Xiong X, et al. Journal of Materials Research and Technology, 2021, 14, 662.
7 Wang S, Zhu Y, Chen H, et al. Ceramics International, 2014, 40(5), 7307.
8 Zhu Y L. Preparation and properties of carbon fiber-reinforced zirconium carbide matrix composites by reactive melt infiltration at relatively low temperature. Ph.D. Thesis, National University of Defense Technology, China, 2014(in Chinese).
祝玉林. C/ZrC复合材料的低温熔渗反应制备及性能研究. 博士学位论文, 国防科学技术大学, 2014.
9 Zeng Y, Xiong X, Li G, et al. Carbon, 2013, 63, 92.
10 Chen X W, Ni D W, Kan Y M, et al. Journal of Materiomics, 2018, 4(3), 266.
11 Tong Y G, Cai Z H, Bai S X, et al. Ceramics International, 2018, 44, 16577.
12 Chen X W, Dong S M, Kan Y M, et al. Journal of the European Ceramic Society, 2016, 36(16), 3969.
13 Zhang H, Liang X B, Hu Y L, et al. Advanced Composites and Hybrid Materials, 2021, 4, 743.
14 Wang D K, Dong S M, Zhou H J, et al. Ceramics International, 2016, 42(8), 10272.
15 Wang D K, Dong S M, Zhou H J, et al. Ceramics International, 2016, 42(6), 6720.
16 Chen X W, Dong S M, Kan Y M, et al. Journal of the European Ceramic Society, 2016, 36(15), 3607.
17 Ni D W, Wang J X, Dong S M, et al. Journal of the American Ceramic Society, 2018, 101(8), 3253.
18 Chen X W, Feng Q, Gao L, et al. Journal of the American Ceramic Society, 2017, 100(10), 4816.
19 Jiang J M, Wang S, Li W, et al. Ceramics International, 2015, 41(7), 8488.
20 Liu Y. Ultra high temperature ceramic modified carbon/carbon composites prepared by reactive melt infilation method. Ph.D. Thesis, Northwestern Polytechnical University, China, 2017(in Chinese).
刘跃. 反应熔渗法制备超高温陶瓷改性C/C复合材料的研究. 博士学位论文, 西北工业大学, 2018.
21 Fan S W, Ning Y F, Ma X. Ceramics International, 2019, 45, 21579.
22 Li J W, Xiao P, Li Z. International Journal of Applied Ceramic Technology, 2021, 18, 981.
23 Duan L Y, Zhao X, Wang Y G. Ceramics International, 2017, 43(18), 16114.
24 Naikade M, Fankhnel B, Weber L, et al. Journal of the European Ceramic Society, 2019, 39(4), 735.
25 Ni Y L, Luo R Y, Luo H. Journal of Alloys and Compounds, 2019, 798, 784.
26 Zhou W, Li Y. Composites Part B: Engineering, 2019, 160, 76.
27 Messner R P, Chiang Y M. Journal of the American Ceramic Society, 2010, 73(5), 1193.
28 Singh M, Behrendt D R. Materials Science and Engineering A, 1995, 194(2), 193.
29 Simner S P, Xiao P, Derby B. Journal of Materials Science, 1998, 33(23), 5557.
30 Aoki T, Ogasawara T, Okubo Y, et al. Composites Part A: Applied Science and Manufacturing, 2014, 66, 155.
31 Aoki T, Ogasawara T. Composites Part A, Applied Science and Manufacturing, 2015, 76, 102.
32 Gao Y Q, Liu Y S, Wang J, et al. Ceramics International, 2020, 46(11), 18976.
33 Tong Y G. Preparation and properties of modified C/C composite by Si-Zr alloyed melt infiltration. Ph.D. Thesis, National University of Defense Technology, China, 2015(in Chinese).
仝永刚. Si-Zr二元系合金反应熔渗改性C/C复合材料及其性能研究. 博士学位论文, 国防科学技术大学, 2015.
34 Arai Y, Inoue R, Goto K, et al. Ceramics International, 2019, 45(12), 14481.
35 Wang Y G, Zhu X J, Zhang L T, et al. Ceramics International, 2012, 38(5), 4337.
36 William G F, Eric J W, William E L. Ultra-high temperature ceramics,materials for extreme environment applications, National Defense Industry Press, China, 2016, pp.2(in Chinese).
威廉·法伦霍尔茨, 艾瑞克·乌齐纳, 威廉·李. 超高温陶瓷——应用于极端服役环境的材料, 国防工业出版社, 2016, pp.2.
37 Jiang J M, Wang S, Li W, et al. Materials Science and Engineering A, 2014, 607, 334.
38 Tong Y G, Bai S X, Chen K, et al. Ceramics International, 2012, 38(7), 5723.
39 Wang S, Zhu Y L, Chen H M, et al. Ceramics International, 2015, 41(4), 5976.
40 Vinci A, Zoli L, Galizia P, et al. Composites Part A: Applied Science and Manufacturing, 2020, 137, 105973.
41 Marius K, Helmreich T, Rosiwal S, et al. Advances in Applied Ceramics, 2018, 117(sup1), s62.
42 Wu H, Yi M Z, Ge Y C, et al. Materials Characterization, 2018, 138, 238.
43 Wu H, Yi M Z, Ge Y C, et al. Corrosion Science, 2019, 160, 108175.
44 Li K Z, Jing X, Fu Q G, et al. Carbon, 2013, 57(3), 161.
45 Arai Y, Marumo T, Inoue R. Journal of Composites Science,2021,5,186.
46 Zeng Y, Xiong X, Li G D, et al. Carbon, 2013, 54, 300.
47 Zeng Y, Xiong X, Wang D N, et al. Corrosion Science, 2015, 98, 98.
48 Yang Z H. The infiltration mechanism study of Hf-based alloy into the carbon materials at low temperature. Master's Thesis, National University of Defense Technology, China, 2014(in Chinese).
杨振寰. 铪基合金低温熔渗碳材料机理研究. 硕士学位论文, 国防科学技术大学, 2014.
49 Hou X C, Hao Z H, Shu Y C, et al. Journal of Central South University (Science and Technology), 2020, 51(11), 3032(in Chinese).
侯旭初,郝振华,舒永春,等. 中南大学学报:自然科学版, 2020, 51(11), 3032.
50 Chang Y B, Sun W, Xiong X, et al. Ceramics International, 2016, 42(15), 16906.
51 Xu Y L, Sun W, Xiong X, et al. Ceramics International,2020,46(5),6424.
52 Xu Y L, Sun W, Miao C M, et al. Journal of the European Ceramic Society, 2021, 41(11), 5405.
53 Guo W J, Bai S X, Ye Y C, et al. International Journal of Applied Ceramic Technology, 2018, 16(1), 88.