钢渣-矿渣复合水泥基材料3D打印性能

doi:10.11896/cldb.21100196

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (11934KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to improve the resource utilization of solid waste and explore the feasibility of using steel slag to prepare 3D printing cement-based materials, the influence of the mass ratio of steel slag to blast furnace slag on the rheology, printability and mechanical properties of compo-site cement-based materials is researched. The results showed that the fluidity and static yield stress of paste increased, the plastic viscosity decreased, the extrudability increased, the deformation rate decreased, and the compressive strength decreased significantly with the increase of steel slag content. It is found that the absolute value of Zeta potential decreases, the gravity between colloidal particles increases with the increase of steel slag content, which results the increase of static yield stress. The solid content of paste increased, the friction between solid particles intensified with the increase of blast furnace slag content, which produced more flocculation structure and network structures, and improved the plastic viscosity of paste.

Key words： 3D printing cement-based material rheology printability steel slag blast furnace slag

Published: 25 June 2023 Online: 2023-06-20

CLC number:

TU528

Fund:National Natural Science Foundation of China(U1504513, U1905216).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHU Lingli
	YANG Zhang
	ZHAO Yu
	GUAN Xuemao
	WU Xikai

Cite this article:

ZHU Lingli,YANG Zhang,ZHAO Yu, et al. 3D Printing Performance of Composite Cement-based Materials with Blast Furnace Slag and Steel Slag[J]. Materials Reports, 2023, 37(12): 21100196-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21100196 OR http://www.mater-rep.com/EN/Y2023/V37/I12/21100196

1 Gao B P, Hao Y D, Zhang S L, et al. Environmental Engineering, 2016, 34(S1), 776 (in Chinese).
高本恒, 郝以党, 张淑苓, 等. 环境工程, 2016, 34(S1), 776.
2 Sun P, Guo Z C. Bulletin of the Chinese Ceramic Society, 2014, 33(09), 2230 (in Chinese).
孙朋, 郭占成. 硅酸盐通报, 2014, 33(09), 2230.
3 You N, Li B, Cao R, et al. Construction and Building Materials, 2019, 227 (10), 1166141.
4 Huang Y, Hui C. In: The Seventh International Conference on Waste Management and Technology. Wuhan, 2012, pp.791.
5 Feng C H, Dou Y, Li D X. Journal of Nanjing Tech University(Natural Science Edition), 2011, 33(01), 74 (in Chinese).
冯春花, 窦妍, 李东旭. 南京工业大学学报(自然科学版), 2011, 33(01), 74.
6 Guo X, Yang J, Xiong G. Cement and Concrete Composites, 2020, 114(6), 103820.
7 Panda B, Unluer C, Tan M J. Cement and Concrete Composites, 2018, 94, 307.
8 Zhao Y, Liu W S, Wang H, et al. Materials Reports, 2020, 34(S2), 1217 (in Chinese).
赵颖, 刘维胜, 王欢, 等. 材料导报, 2020, 34(S2), 1217.
9 Zhang D W, Wang D M, Pu C A, et al. Journal of Basic Science and Engineering, 2018, 26(03), 596 (in Chinese).
张大旺, 王栋民, 朴春爱, 等. 应用基础与工程科学学报, 2018, 26(03), 596.
10 Roussel N. Cement and Concrete Research, 2018, 112, 76.
11 Perrot A, Rangeard D, Pierre A. Materials and Structures, 2016, 49(4), 1213.
12 Wallevik J E. Journal of Non-Newtonian Fluid Mechanics, 2008, 155(3), 116.
13 Jiao D W, An X P, Shi C J, et al. Journal of the Chinese Ceramic Society, 2017, 45(09), 1360 (in Chinese).
焦登武, 安晓鹏, 史才军, 等. 硅酸盐学报, 2017, 45(09), 1360.
14 Feys D, Wallevik J E, Yahia A, et al. Materials and Structures, 2013, 46, 289.
15 Zhao S R, Zhang K F, Jiao G F, et al. Bulletin of the Chinese Ceramic Society, 2015, 34(S1), 308 (in Chinese).
赵世冉, 张凯峰, 焦国锋, 等. 硅酸盐通报, 2015, 34(S1), 308.
16 Ling T C, Poon C S. Cement and Concrete Composites, 2014, 53(10), 350.
17 Zhuang Z H, Zhou C Y, Yu Q J, et al. New Building Materials, 2007(08), 9 (in Chinese).
庄梓豪, 周春英, 余其俊, 等. 新型建筑材料, 2007(08), 9.
18 Lex R, Timothy W, Nicolas R, et al. Cement and Concrete Research, 2018, 112, 86.
19 Mohan M K, Rahul A V, Tittelboom K V, et al. Cement and Concrete Research, 2021, 139, 106258.
20 Choi M, Roussel N, Kim Y, et al. Cement and Concrete Research, 2013, 45, 69.
21 Kwon S H, Jang K P, Kim J H, et al. International Journal of Concrete Structures and Materials, 2016, 10(3), 75.
22 Xia Y X. The preparation and properties on alkali-activated cementitious material for 3D printing. Master’s Thesis, Chongqing University. China, 2019 (in Chinese).
夏雨欣. 3D打印碱激发胶凝材料的制备及性能研究. 硕士学位论文, 重庆大学, 2019.
23 Wang Q, Li M Y, Shi M X. Journal of the Chinese Ceramic Society, 2014, 42(05), 629 (in Chinese).
王强, 黎梦圆, 石梦晓. 硅酸盐学报, 2014, 42(05), 629.
24 Roussel N, Ovarlez G, Garrault S, et al. Cement and Concrete Research, 2012, 42(1), 148.
25 Plank J, Hirsch C. Cement and Concrete Research, 2007, 37(4), 537.
26 Duan Y H, Zhu L L, Zhao Y, et al. Science Technology and Enginee-ring, 2021, 21(15), 6416 (in Chinese).
段懿航, 朱伶俐, 赵宇, 等. 科学技术与工程, 2021, 21(15), 6416.
27 Wu F, Yang F G, Xiao B L, et al. Materials Reports, 2021, 35(03), 3021 (in Chinese).
吴凡, 杨发光, 肖柏林, 等. 材料导报, 2021, 35(03), 3021.
28 Romagnoli M, Sassatelli P, Gualtieri M L, et al. Construction and Buil-ding Materials, 2014, 65, 526.
29 Romagnoli M, Leonelli C, Kamse E, et al. Construction and Building Materials, 2012, 36, 251.
30 Wang D M, Zhang L R, Zhang W L, et al. Journal of Building Materials, 2012, 15(06), 755 (in Chinese).
王栋民, 张力冉, 张伟利, 等. 建筑材料学报, 2012, 15(06), 755.
31 Vikan H, Justnes H. Cement and Concrete Research, 2007, 37(11), 1512.
32 Kong F L, Liu Z, Zhang J J, et al. Journal of Chinese Electron Microscopy Society, 2016, 35(03), 229 (in Chinese).
孔凡龙, 刘泽, 张俱嘉, 等. 电子显微学报, 2016, 35(03), 229.
33 Liu H X, Zhan Z F, Zeng J J, et al. Journal of Guangzhou University(Natural Science Edition), 2018, 17(04), 66 (in Chinese).
刘慧娴, 詹镇峰, 曾俊杰, 等. 广州大学学报(自然科学版), 2018, 17(04), 66.