激光熔覆同路送丝光路结构设计及分析

doi:10.11896/cldb.21090270

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (6784KB)
Export: BibTeX | EndNote (RIS)

Abstract According to the characteristics of the coaxial wire feeding laser cladding technology, the annular beam scheme, three beams scheme, and four beams scheme were analyzed respectively, the advantages and disadvantages of different design schemes were compared, and the finite element analysis of the optical path convergence effect was carried out. The results show that when using a parabolic mirror and planar mirror, the convergence effect of the annular beam scheme and three beams scheme is stronger than that of the four beams scheme. The parabolic mirror is stronger than the plane mirror scheme for the focus position energy. Due to the laser beam's poor convergence effect and complex structure, the four beams scheme does not meet the practical application requirements. The convergence effect and focus of the energy of the annular beam scheme are not much different from the three beams scheme. However, when designing the wire feeding path, the three beams scheme can avoid the interference of the optical wire and make the wire feeding path layout more reasonable and stabilize the wire feeding process. In conclusion, the three beams paraboloid scheme is the best scheme for the design of a laser cladding head optical path with the coaxial wire feeding.

Key words： laser cladding coaxial wire feeding optical path design convergence effect

Published: Online: 2023-03-27

CLC number:

TG47

Fund:Open Research Fund Project of State Key Laboratory (sklms2021016) and Shaanxi Provincial Department of Education's 2022 Local Special Scientific Research Plan Project (22JC053).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Suli
	MA Kaiyue
	FENG Gaolei
	XIONG Jie
	LI Lianqiang

Cite this article:

LI Suli,MA Kaiyue,FENG Gaolei, et al. Design and Analysis of the Coaxial Laser Cladding Wire Feeding Structure Optical Path[J]. Materials Reports, 2023, 37(6): 21090270-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21090270 OR http://www.mater-rep.com/EN/Y2023/V37/I6/21090270

1 Chen Xiaoming, Wang Haijin, Zhou Xialiang, et al. Materials Reports, 2018, 32(S1), 341 (in Chinese).
陈小明, 王海金, 周夏凉, 等. 材料导报, 2018, 32(S1), 341.
2 Xu Lei, Du Yanbin, Zhang Lei. Journal of Chongqing Technology and Business University(Natural Science Edition), 2021, 38(1), 1(in Chinese)
许磊, 杜彦斌, 张磊. 重庆工商大学学报(自然科学版), 2021, 38(1), 1.
3 Yang Meichen, Luo Hao, Song Jingjing, et al. Journal of Chongqing University of Technology(Natural Science), 2022, 36(3), 112(in Chinese).
杨美晨, 罗豪, 宋晶晶等. 重庆理工大学学报(自然科学), 2022, 36(3), 112.
4 Zhu Ping. Study on inside-laser coaxial wire feeding process of laser cladding and single beads prototyping. Master's Thesis, Soochow University,China, 2013 (in Chinese).
朱萍. 同轴送丝激光熔覆工艺研究及薄壁墙成形堆积. 硕士学位论文, 苏州大学, 2013.
5 Yang Ning, Yang Fan. Material Heat Treatment Technology, 2010, 4(8), 118 (in Chinese).
杨宁, 杨帆. 材料热处理技术, 2010, 4(8), 118.
6 Kovalev O, Bedenko D, Zaitsev A. Applied Mathematical Modelling, 2018, 57, 339.
7 Duocastella M, Arnold C B. Laser and Photonics Reviews, 2012, 6(5), 607.
8 Yao Jianhua, Zhang Wei. Laser and Optoelectronics Progress, 2006, 43(4), 8(in Chinese).
姚建华, 张伟. 激光与光电子学进展, 2006, 43(4), 8.
9 Zhong Minlin, Liu Wenjin. Chinese Journal of Lasers, 2002, 29(11), 1031(in Chinese).
钟敏霖, 刘文今. 中国激光, 2002, 29(11), 1031.
10 Ma Zhuang, Gu Lin, Li Zhichao. Hot Working Y-Z, 2010, 39(6), 83(in Chinese).
马壮, 谷琳, 李智超. 热加工Y-Z, 2010, 39(6), 83.
11 Zhang Jiping, Shi Shihong, Jiang Weiwei et al. Chinese Journal of Lasers, 2019, 46(10), 122 (in Chinese).
张吉平, 石世宏, 蒋伟伟, 等. 中国激光, 2019, 46(10), 122.
12 Wang Han, Zhou Weimin, Min Guoquan, et al. China Metal Bulletin, 2018(12), 248(in Chinese).
王涵, 周伟民, 闵国全, 等. 中国金属通报, 2018(12), 248.
13 Liu Lulu, Sun Ronglu. Hot Working Technology, 2007, 36(11), 59(in Chinese).
刘录录, 孙荣禄. 热加工工艺, 2007, 36(11), 59.
14 Li Xiaowei, Zhang Chunhua, Zhang Song, et al. Laser Journal, 2007(2), 1(in Chinese).
李晓薇, 张春华, 张松, 等. 激光杂志, 2007(2), 1.
15 Zhu Gangxian, Shi Tuo, Fu Geyan, et al. Applied Laser, 2013, 33(4), 381(in Chinese).
朱刚贤, 石拓, 傅戈雁, 等. 应用激光, 2013, 33(4), 381.
16 Shi Shihong, Fu Geyan, Li Long, et al. Chinese Journal of Lasers, 2010, 37(1), 266(in Chinese).
石世宏, 傅戈雁, 李龙, 等. 中国激光, 2010, 37(1), 266.
17 Kelbassa J, Gasser A, Bremer J, et al. Journal of Laser Applications, 2019, 31(2), 022320.
18 Ji Shaoshan, Liu Fan, Fu Geyan, et al. Surface Technology, 2019, 48(4), 285(in Chinese).
吉绍山, 刘凡, 傅戈雁, 等. 表面技术, 2019, 48(4), 285.
19 Liu Yancong, Ma Li'an, Li Jitao, et al. Hot Working Technology, 2015, 44(10), 176(in Chinese).
刘衍聪, 马立安, 李继涛, 等. 热加工工艺, 2015, 44(10), 176.
20 Kovalenko V, Yao J, Zhang Q, et al. Procedia Cirp, 2016, 42, 96.
21 Zhang Y, Jin Y, Chen Y, et al. Materials, 2021, 14(18), 5196.
22 Ji S, Liu F, Shi T, et al. Chinese Journal of Mechanical Engineering, 2021, 34(45), 22.