聚磷酸铵-单宁酸-三聚氰胺/环氧树脂复合材料的阻燃及力学性能

doi:10.11896/cldb.21090236

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4345KB)
Export: BibTeX | EndNote (RIS)

Abstract The traditional intumescent flame retardant is composed of acid source ammonium polyphosphate (APP), carbon source pentaerythritol (PER) and gas source melamine (MEL) at the mass ratio of 3∶1∶1. Biomass-tannic acid (TA) was used as a green intumescent flame retardant in epoxy resin instead of PER with APP and MEL. The effects of different ratios of acid source APP, new carbon source TA and gas source MEL on the flame retardancy and mechanical properties of epoxy resin (EP) composites were investigated. The experimental results showed that when the addition of the new intumescent flame retardant was 20wt% and the mass ratio of APP∶TA∶MEL was 9.71∶6.11∶3.68, the LOI value of the obtained flame retardant EP-3 composites increased to 38.80% and the UL-94 test reached V-0 level. Cone calorimetric tests showed that the peak heat release rate (PHRR), total heat release (THR), total smoke generation (TSP) and average carbon monoxide release rate (av-CO) of EP-3 decreased by 48.96%, 14.33%, 26.83% and 28.01%, respectively, compared with those of EP-0 added conventional intumescent flame retardants, which indicated that APP/TA/MEL green flame retardants had excellent synergistic flame retardant effect. Moreover, the TG, DTG and SEM analysis revealed that the flame retardant mechanism was a synergistic mechanism of gas phase and solid phase flame retardant. In particular, the flame retardant promoted the formation of the carbon layer with high density and strength of the substrate, thus greatly improving the solid phase flame retardant effect. In addition, the mechanical property test showed that the new carbon source TA was beneficial to improve the tensile strength and flexural strength of the flame retardant EP composites.

Key words： tannic acid intumescent flame retardant epoxy resin flame retardancy

Published: 10 May 2023 Online: 2023-05-04

CLC number:

TB332

Fund:National Natural Science Foundation of China(21472241)and Natural Science Foundation of Hebei Province (E2016507027).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LU Yuxin
	LU Lingang

Cite this article:

LU Yuxin,LU Lingang. Flame Retardancy and Mechanical Properties of Ammonium Polyphosphate-Tannic Acid-Melamine/Epoxy Resin Composites[J]. Materials Reports, 2023, 37(9): 21090236-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21090236 OR http://www.mater-rep.com/EN/Y2023/V37/I9/21090236

1 Zhang Q, Yang S, Wang J, et al. Polymer Degradation and Stability, 2019, 167, 10.
2 Zhang L L, Liu A H, Zeng X R. Journal of Applied Polymer Science, 2009, 111(1), 168.
3 Tang Q, Wang B, Shi Y, et al. Industrial ＆ Engineering Chemistry Research, 2013, 52(16), 5640.
4 Zhao C X, Deng L M, Huang Z Y. Acta Polymerica Sinica, 2015(4), 382.
5 Zou Z P, Xiao X, Tian J, et al. China Synthetic Resin and Plastics, 2020, 37 (1), 97(in Chinese).
邹政平, 肖啸, 田杰, 等. 合成树脂及塑料, 2020, 37 (1), 97.
6 Hergenrother P M, Thompson C M, Smith Jr J G, et al. Polymer, 2005, 46, 5012.
7 Yao F Q, Tao J J, Wang H H, et al. Chemistry and Industry of Forest Products, 2017, 37(5), 19(in Chinese).
姚奉奇, 陶骏骏, 王海晖, 等. 林产化学与工业, 2017, 37(5), 19.
8 Kolb V M. Green Organic Chemistry and its Interdisciplinary Applications, CRC Press, Taylor and Francis, 2017.
9 Carole T M, Pellegrino J, Paster M D. Applied Biochemistry and Biotechnology, 2004, 115(1-3), 871.
10 Mohanty A K, Misra M, Drzal L T. Journal of Polymers and the Environment, 2002, 10(1-2), 1140.
11 Gandini A. Macromolecules, 2008, 41(24), 9491.
12 Grigsby W, Bridson J, Lomas C, Elliot J. Polymers, 2013, 5, 344.
13 Kiratitanavit W, Xia Z, Singh A, et al. Combustion, 2016, 9, 1.
14 Zhu M, He Z, Du T Y, et al. Journal of North China Institute of Science and Technology, 2019, 16(6), 48(in Chinese).
朱敏, 何圳, 杜天意, 等. 华北科技学院学报, 2019, 16(6), 48.
15 Meng W, Dong Y, Li J, et al. Composites Part B:Engineering, 2020, 188,107854.
16 Li J J, Ou Y X. Flame retardant theory, Science Press, China, 2013, pp. 80(in Chinese).
李建军, 欧育湘. 阻燃理论, 科学出版社, 2013, pp.80.
17 Camino G, Costa L, Martinasso G. Polymer Degradation and Stability, 1989, 23, 359.
18 Fan J J, Min Y, Yang J, et al. Materials Reports, 2021, 35(10), 10189(in Chinese).
范娟娟, 闵样, 杨吉, 等. 材料导报, 2021, 35(10), 10189.
19 Lu L G, Cheng Z, Qiu X M, et al. Chemical Journal of Chinese Universities, 2018, 39(12), 2789(in Chinese).
卢林刚, 程哲, 丘新铭, 等. 高等学校化学学报, 2018, 39(12), 2789.
20 Li X, Chen R H, Wei Y, et al. Acta Materiae Compositae Sinica, 2021, 38(9), 2796(in Chinese).
李想, 陈润华, 魏毅, 等. 复合材料学报, 2021, 38(9), 2796.
21 Jiao C, Zhuo J, Chen X, et al. Journal of Thermal Analysis and Calori-metry, 2012, 114 (1), 253.
22 Lu L G, Zhou X, Zhao M. Plastic, 2010, 39(5), 21(in Chinese).
卢林刚, 周霞, 赵敏. 塑料, 2010, 39(5), 21.
23 Ma W, Xu B, Shao L S et al. Macromolecular Materials and Engineering, 2019, 304 (12), 1.
24 Qu L, Zhang C, Li P, et al. RSC Advances, 2018, 8 (52), 29816.
25 Alongi J, Ciobanu M, Malucelli G. Carbohydrate Polymers, 2011, 85(3), 599.