熔盐电解法和固体粉末法在纯镍表面渗硼的对比研究

doi:10.11896/cldb.21050282

Abstract
Figure/Table
References
Related Citation (3)

Download:

Full Text ( PDF ) (4098KB)
Export: BibTeX | EndNote (RIS)

Abstract In this work, the boriding of nickel was investigated by molten salt electrolysis process and solid powder method to improve its surface hardness. The electrochemical boriding was carried out in a borax-sodium carbonate molten electrolyte with the current density of 750 A/m² while B₄C and KBF₄ were used as boronizing agent in solid powder boriding process. The microstructural characterization and phase analysis of the resultant borides layer were performed using optical scanning microscopy(SEM) and X-ray diffraction methods (XRD), and energy dispersive spectrometer(EDS) was applied to determine the element present in the borides. The results show that a boronizing layer containing Ni₂B and Ni₃B can be formed on the surface of pure nickel by the above two methods. The thickness of the boronizing layer is about 184.35 μm when the electrolysis temperature is 950 ℃ and the duration is 4 h, using molten salt electrolysis method. The thickness of the boronizing layer is about 176.35 μm when the boronizing temperature is 950 ℃ and duration is 10 h for the solid powder boronizing process. The surface hardness values of the boronizing samples reach 1 755HK and 1 526HK for electrochemical boriding and solid powder method respctively, which are higher than that of the pure nickel. It is found that the greater the thickness of the boronizing layer is, the higher the surface hardness value will be.

Key words： boronizing pure nickel molten salt electrolysis process solid powder method surface hardness

Received: 25 September 2022 Published: 25 September 2022 Online: 2022-09-26

CLC number:

TG146.2

Fund:The National Natural Science Foundation of China (51404186).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Bixia
	YU Xiang
	LI Jianxin
	WANG Ziyu
	MA Hongzhou

Cite this article:

WANG Bixia,YU Xiang,LI Jianxin, et al. Comparative Study of Boronizing of Pure Nickel by Molten Salt Electrolysis Process and Solid Powder Method[J]. Materials Reports, 2022, 36(18): 21050282-5.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21050282 OR http://www.mater-rep.com/EN/Y2022/V36/I18/21050282

1 Liu G Q, Zhang B S, Zhang F, et al. China Resources Comprehensive Utilization, 2020, 38(7), 102(in Chinese).
刘贵清, 张邦胜, 张帆, 等. 中国资源综合利用, 2020, 38(7), 102.
2 Yang Z, Li G, Zheng B L. Nonferrous Metals Processing, 2021, 50(3),7(in Chinese).
杨哲,李桂,郑博龙.有色金属加工,2021,50(3),7.
3 Zhai X J. Heavy metal metallurgy, Metallurgical Industry Press, China, 2011(in Chinese).
翟秀静. 重金属冶金学, 冶金工业出版社,2011.
4 Quan C J, Liu Y N, Wang H, et al. China Chemical Trade, 2020, 12(13), 223(in Chinese).
权超健, 刘燕娜, 王浩,等. 中国化工贸易, 2020, 12(13), 223.
5 Wang H, Zhang J J, Feng X F, et al. Surface Technology, 2020, 49(5), 230(in Chinese).
王昊,张娇娇,冯晓飞,等. 表面技术, 2020, 49(5), 230.
6 Shi L C, Wu X C, Yao J, et al. Shanghai Metals, 2017, 39(4), 25(in Chinese).
施良才,吴晓春,姚杰,等. 上海金属, 2017, 39(4), 25.
7 Deng D W, Wang C G, Liu Q Q, et al. Transactions of Nonferrous Metals Society of China, 2015, 25, 437.
8 Liu H L. Investigation and property analysis of electric field assisted boriding process on pure nickel substrates. Master's Thesis, South China University of Technology, China, 2020(in Chinese).
刘欢龙. 纯镍基体电场辅助低温渗硼工艺及性能的研究. 硕士学位论文, 华南理工大学, 2020.
9 Makuch N. Transactions of Nonferrous Metals Society of China, 2021, 3(31), 764.
10 Natalia Makuch, Piotr Dziarski. Surface & Coatings Technology, 2011, 405, 126508.
11 Ma X F. Study on boriding of TA2 by molten salt electrolysis in Na₂B₄O₇-CaCl₂ system. Master's Thesis, Xi'an University of Architecture and Technology, China, 2017(in Chinese).
马兴飞. Na₂B₄O₇-CaCl₂体系TA2表面熔盐电解法渗硼的基础研究.硕士学位论文,西安建筑科技大学, 2017.
12 Kulka M, Makuch N, Poławski M. Surface and Coatings Technology, 2014, 244, 78.
13 Liu J J, Chen Z P. Plating and Finishing, 2011, 33(7), 24(in Chinese).
刘建建, 陈祝平. 电镀与精饰, 2011, 33(7), 24.
14 Liao L, Liu J Y, Jin Y R, et al. Journal of Xihua University(Natural Science Edition), 2012, 31(1), 98(in Chinese).
廖磊,刘锦云,金应荣,等. 西华大学学报(自然科学版), 2012, 31(1), 98.
15 Xu Z Y, Yuan K, Zhang S Y, et al. Thermal Spray Technology, 2020, 12(4), 37(in Chinese).
许贞元, 原慷, 张思源, 等. 热喷涂技术, 2020, 12(4), 37.
16 Sista V, Kahvecioglu O, Eryilmaz O L, et al. Thin Solid Films, 2011, 520(5), 1582.
17 Eroglu M. Surface and Coatings Technology, 2009, 203(16),2229.
18 Wang B X, Cheng L, Tian D H, et al. Rare Metal Materials and Engineering, 2016, 45(3), 709(in Chinese).
王碧侠, 程亮, 田栋华, 等. 稀有金属材料与工程, 2016, 45(3), 709.
19 Wang B X, Tian D H, Ma X F, et al. Materials Reports A: Review Papers, 2015, 29(1), 117(in Chinese).
王碧侠, 田栋华, 马兴飞, 等. 材料导报:综述篇, 2015, 29(1), 117.
20 Sista V, Kahvecioglu O, Kartal G, et al. Surface and Coatings Technology, 2013, 215, 452.
21 Huang Y G, Ren M D, Zhao X, et al. Materials Reports B: Research Papers, 2012, 22(6), 14(in Chinese).
黄有国, 任孟德, 赵欣, 等. 材料导报:研究篇, 2012, 22(6), 14.
22 Wu Y K, Yang H L, Xu H, et al. Plating & Finishing, 2014, 36(11), 24(in Chinese).
吴晔康, 杨海丽, 徐宏, 等. 电镀与精饰, 2014, 36(11), 24.
23 Mu D, Hu Z H, Shen B L. Rare Metal Materials and Engineering, 2015, 44(8), 1979(in Chinese).
慕东, 胡志华, 沈保罗. 稀有金属材料与工程, 2015, 44(8), 1979.
24 Wen F R, Tang C B, Chen H X, et al. Plating & Finishing, 2018, 37(21), 994(in Chinese).
文芙蓉, 唐长斌, 陈红霞, 等. 电镀与精饰, 2018, 37(21), 994.