复合材料液体成型树脂流动前锋监测技术研究进展

doi:10.11896/cldb.21030191

Abstract
Figure/Table
References
Related Citation (3)

Download:

Full Text ( PDF ) (17644KB)
Export: BibTeX | EndNote (RIS)

Abstract Fibrous composite is widely used in the space industry. Liquid composite molding (LCM) is a common fabrication of fibrous composite. And there might be defects in the fibrous composite fabricated through LCM process due to the lead-lag effect, which would affect the perfor-mance of the fibrous composite. By monitoring the resin flow front during LCM process, the injection of resin can be optimized to reduce the internal defects and improve the quality of the fibrous composite. This review introduces the research status on five types of resin flow front monitoring method: fiber optic sensor monitoring method, CCD camera monitoring method, thermocouple monitoring method, pressure sensor monitoring method and ultrasonic monitoring method, and introduces two main monitoring methods used in ultrasonic monitoring method, which are longitudinal wave method and Lamb wave method. Finally, this review summarizes the difficulties in the research of ultrasonic monitoring systems for resin flow fronts during LCM process and forecasts the possible future research directions.

Key words： fibrous composite liquid composite molding resin flow front monitoring ultrasonic monitoring

Published: Online: 2022-12-09

CLC number:

TB553

Fund:Science and Technology Major Project of Shanxi Province(20201102003).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YU Yue
	WANG Zhe
	YAO Peiheng
	YAO Wensheng
	YANG Chenlong

Cite this article:

YU Yue,WANG Zhe,YAO Peiheng, et al. Research Progress on Monitoring Methods for Resin Flow Front During Liquid Composite Molding Process[J]. Materials Reports, 2022, 36(23): 21030191-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21030191 OR http://www.mater-rep.com/EN/Y2022/V36/I23/21030191

1 Du S Y. Science & Technology Review, 2013, 31(7),3 (in Chinese).
杜善义. 科技导报,2013,31(7),3.
2 Zhao A A, Wang L W, Wang H J, et al. Engineering Plastics Application, 2018, 46(4),145(in Chinese).
赵安安, 王林文, 王浩军, 等. 工程塑料应用, 2018, 46(4),145.
3 Crowley D M, Wardc, Potter K. SAE Technical Paper, 2013, 7(1),2144.
4 Li L. Aeronautical Manufacturing Technology, 2017(11),105(in Chinese).
李林. 航空制造技术, 2017(11),105.
5 Xu Z. Synthetic Materials Aging and Application, 2016, 45(2),83(in Chinese).
徐竹. 合成材料老化与应用,2016,45(2),83.
6 Li C S, Liang J, Zhang B M, et al. Journal of Tsinghua University (Science and Technology), 2002(2),161(in Chinese).
李辰砂, 粱吉, 张博明, 等. 清华大学学报(自然科学版), 2002(2),161.
7 Riad K, Obaidallah E, Rofaida B. Automation in Construction, 2018(72), 88
8 Wang Y S, Qing X L. Acta Materiae Compositae Sinica, 2016, 33(1),1(in Chinese).
王奕首, 卿新林. 复合材料学报, 2016, 33(1),1.
9 Michael W, Nielsen, et al. Journal of Composite Materials, 2014, 48(3), 365.
10 Hu Y, Huang G F, Liang K, et al. Composites Science and Engineering, 2017(5),11(in Chinese).
胡焱, 黄贵飞, 梁科, 等. 玻璃钢 /复合材料, 2017(5),11.
11 Tang Y, He B B, Li L J, et al. China Plastics Industry, 2007(S1),25(in Chinese).
唐渊, 何波兵, 李兰军, 等. 塑料工业, 2007(S1),25.
12 Zhang X Y. Study on the curing behavior of civil aircraft composite based on ultrasonic on-line monitoring. Master's Thesis, Civil Aviation Flight University of China, China, 2015 (in Chinese).
张骁亚. 基于超声在线监测的民机复合材料固化行为研究. 硕士学位论文, 中国民用航空飞行学院, 2015.
13 Liu Z H, Mu Y L, Song G R, et al. Chinese Journal of Scientific Instrument, 2015, 36(9),1961(in Chinese).
刘增华, 穆云龙, 宋国荣, 等. 仪器仪表学报, 2015, 36(9),1961.
14 Laurenzi S, Casini A, Pocci D. Composites Part A: Applied Science and Manufacturing, 2014, 67,221.
15 Luo C Y, Xiong J J, Yi X S, et al. Acta Materiae Compositae Sinica, 2011, 28(3),203(in Chinese).
罗楚养, 熊峻江, 益小苏, 等. 复合材料学报, 2011, 28(3),203.
16 Li L T. Research on resin flow front of vacuum infusion molding process. Master's Thesis, Dalian University of Technology, China, 2013 (in Chinese).
李龙涛. 真空导入模塑工艺树脂流动前沿研究. 硕士学位论文, 大连理工大学, 2013.
17 Yang J S, Xiao J Y, Zeng J C. et al. Aerospace Materials & Technology, 2010, 40(1),5(in Chinese).
杨金水,肖加余,曾竟成,等. 宇航材料工艺, 2010, 40(1),5.
18 Yang J S. Study on VIMP manufacturing and performance for thick-section carbon fiber composites. Ph.D. Thesis, National University of Defense Technology, China, 2012 (in Chinese).
杨金水. 厚截面碳纤维复合材料VIMP工艺制备与性能研究. 博士学位论文, 国防科学技术大学, 2012.
19 Sanchez D M, Gresil M, Soutis C. Composites Science and Technology, 2015, 120, 49.
20 Zhu Y D. Research on the on-line sensing and monitoring system in liquid composites molding. Ph.D. Thesis, Wuhan University of Technology, China, 2005 (in Chinese).
祝颖丹. LCM技术在线监控体系的研究. 博士学位论文, 武汉理工大学,2005.
21 Montés N, Sánchez F, García J A, et al. AIP Conference Proceedings, 2007, 907(1),902.
22 Wang P, Demirel M, Drapier I S, Molimard J. Canada: the 9th International Conference on Flow Processes in Composite Materials, 2008, 8(7),62.
23 Spiridon K, Alexander M, Maximilian T, et al. Journal of Reinforced Plastics & Composites, 2015, 34(12),1015.
24 Tuncol G, Danisman M, Kaynar A. Composites Part A: Applied Science and Manufacturing, 2007, 38(5),1363.
25 Maryam K M. Embedded Sensors to Monitor Production of Composites: From Infusion to Curing of Resin. Ph.D. Thesis, Bremen university, Germany,2017.
26 Stephen L W. Reinforced Plastics, 2008, 52(10),28.
27 Stephen L W. Reinforced Plastics, 2001, 44(2),32.
28 Maryam, Kahali, Moghaddam, et al. Journal of Composite Materials, 2017, 51(25),3585.
29 Kahali M, Moghaddam, Arne, et al. Sensors (Basel, Switzerland), 2015, 15(4),7499.
30 Kahali M M, Arne B, Adli D, et al. Proceedings, 2017, 1(4),339.
31 Schmachtenberg E, Schulte zur H J, Töpke J. Polymer Testing, 2005, 24(3),330.
32 Shepard D D, Smith K R. Sensor Review, 1997, 90(6),187.
33 Konstantopoulos S, Fauster E , Schledjewski R. Express Polymer Letters, 2014, 8(11),823.
34 Hilmer P, Weiland M. Advanced Aerostructure Technology Forum 2016,2016,1.
35 Nalla A R. Close-loop flow control approaches for VARTM. Ph.D. Thesis, University of Delaware, USA,2005.
36 William L C. Resin transfer molding process monitoring and control. Ph.D. Thesis, the University of Dayton, USA, 2008.
37 Luthy. Three-dimensional permeability measurements based on direct current and ultrasound monitoring techniques. Ph.D. Thesis, Swiss Federal Institute of Technology Zurich, Swiss,2003.
38 Yao W Y. Research on ultrasonic monitoring technology of resin flow front in fiber reinforced composite perform. Master's Thesis, Zhejiang University, China, 2021 (in Chinese).
姚文胜. 纤维增强复合材料预成型体中树脂流动前锋超声监测技术研究. 硕士学位论文,浙江大学, 2021.
39 Schmachtenberg E, Heide J S Z, Topker J. Polymer Testing, 2005, 24(3),330.
40 Lionetto F, Rizzo R, Luprano V A M, et al. Materials Science and Engineering: A, 2004, 370(1),284.
41 Pindinelli C, Montagna G, Luprano V A M, et al. Macromolecular Symposia, 2002, 180(1),73.
42 Liebers N, Stefaniak D, Kleineberg M, et al. International Conference on Composite Materials (ICCM). 2013(11), 2111.
43 Huang G F. Study on monitoring curing process of epoxy resin under medium temperature condition by ultrasonic technique. Master's Thesis, Civil Aviation Flight University of China, China, 2018 (in Chinese).
黄贵飞. 环氧树脂中温固化的超声波监测研究. 硕士学位论文, 中国民用航空飞行学院,2018.
44 Wang Y S, Li Y K, Wu D, et al. Aeronautical Manufacturing Technology, 2017(19),50(in Chinese).
王奕首, 李煜坤, 吴迪, 等. 航空制造技术,2017(19),50.
45 Li Y K. Real-time monitoring technology of liquid composite molding process based on piezoelectric sensor network. Master's Thesis, Xiamen University, China, 2018 (in Chinese).
李煜坤. 基于压电传感网络的复合材料液体成型过程实时监测技术. 硕士学位论文, 厦门大学,2018.
46 Victor G. Structural health monitoring with piezoelectric wafer active sensors, Academic Press, UK, 2014.
47 Xiao L, Yukun L, Jianjian Z, et al. Polymer Composites, 2020, 42(1),1.