INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Synthesis of Manganous Oxide and Its Electrochemical Properties for Magnesium Storage |
ZHU Jiajia1, HUANG Bin1, LI Yanwei1, CHEN Quanqi1, LI Qingkui2, YANG Jianwen1
|
1 College of Chemistry and Bioengineering,Guilin University of Technology,Guilin 541004 2 College of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001 |
|
|
Abstract Anode material for magnesium ion battery is rarely studied. Aiming at investigating the preparation parameters and magnesium storage properties of manganous oxide as negative electrode material for magnesium ion battery, the manganous oxide was prepared by oxalate pyrolysis, and the effects of temperature, particle size and morphology on the electrochemical properties of magnesium storage were preliminarily analyzed by TG, XRD, SEM and electrochemical measurements in this study. The results showed that the manganous oxide with face-centered cubic structure could be obtained by pyrolysis of manganese oxalate over 400 ℃, clear pseudocapacitor characterization of manganous oxide anode materials could be found in Mg (AlCl2EtBu)2/THF electrolyte. With increasing preparation temperature, the primary particles grew from nanometer size to crystal with particle size of 500 nm to 2 μm, which resulted in the drop of specific capacity. The nano-manganous oxide (particle size of about 30—50 nm) prepared at 400 ℃ exhibited more notable battery characteristics than other samples, with the initial specific capacity of about 39.6 mAh·g-1, and the cyclic specific capacity of 19.0 mAh·g-1 after 50 charging and discharging cycles. The electrochemical properties of manganous oxide for magnesium storage can be enhanced by nanocrystllization, improving electronic conductivity and optimizing surface properties.
|
Published: 03 April 2019
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (51764012), the Natural Science Foundation of Guangxi Province(2017GXNSFAA198230), the Electromagnetic Chemical Functional Substance Laboratory Foundation of Guangxi Province (EMFM20161105). |
About author:: Jiajia Zhu received his M.S. degree in June 2018 from Guilin University of Technology in engineering. Jianwen Yang received his B.E. degree from Guilin Institute of Metallurgy and Geology in 1992 and received his Ph.D. degree in non-ferrous metallurgy from the Institute of Vacuum Metallurgy, Central South University, in 2005. |
|
|
1 Lin D, Liu Y, Cui Y. Nature Nanotechnology,2017,12(3),194. 2 Kim J S, Par J, Park J W, et al. Electrochimica Acta,2013,92(1),427. 3 Muldoon J, Bucur C B, Gregory T. Angewandte Chemie International Edition,2017,56(40),12064. 4 Shao Y, Gu M, Li X, et al. Nano Letters,2014,14(1),255. 5 Wu N, Yang Z Z, Yao H R, et al. Angewandte Chemie,2015,54(19),5757. 6 Saha P, Datta M K, Velikokhatnyi O I, et al. Science,2014,66,1. 7 Liebenow C. Journal of Applied Electrochemistry,1997,27(2),221. 8 Lin J H, Jing X P, et al. Inorganic material chemistry, Peking University Press, China,2006(in Chinese). 林建华,荆西平,等.无机材料化学,北京大学出版社,2006. 9 Wang T, Zhou J H. Guangzhou Chemical Industry,2016,44(21),10(in Chinese). 王涛,周菊红.广州化工,2016,44(21),10. 10 Shi Y, Yang J W, Li D, et al. Materials for Mechanical Engineering,2012,36(6),27(in Chinese). 石阳,杨建文,李丹,等.机械工程材料,2012,36(6),27. 11 Chen Y Z. Preparation of ferrous oxide electrode materials and study on the electric capacity characteristic. Master’s Thesis, Guilin University of Technology,China,2010(in Chinese). 陈永珍.氧化亚铁电极材料制备及其超容特性研究. 硕士学位论文, 桂林理工大学,2010. 12 Platteau C, Lefebvre J, Affouard F, et al. Acta Crystallographica,2010,60(4),453. 13 Jia Z, Dai C S, Chen L. Electrochemical measurement methods, Chemical Industry Presss, China,2007(in Chinese). 贾铮,戴长松,陈玲.电化学测量方法,化学工业出版社,2007. 14 Manjuladevi R, Thamilselvan M, Selvasekarapandian S, et al. Solid State Ionics,2017,308,90. 15 Shahid Rasul, Shinya Suzuki, Shu Yamaguchi, et al. Solid State Ionics,2012,225,542. 16 Su L, Zhong Y, Wei J, et al. RSC Advances,2013,3(23),9035. |
|
|
|